Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

Modeling of Wide-Angle Seismic Attributes Using the Gaussian Beam Method

In this study, observed seismic attributes from shot gather 11 of the SAREX experiment are used to derive a preliminary velocity and attenuation model for the northern end of the profile in southern Alberta. Shot gather 11 was selected because of its prominent Pn arrivals and good signal to noise ratio. The 2-D Gaussian beam method was used to perform the modeling of the seismic attributes including travel times, peak envelope amplitudes and pulse instantaneous frequencies for selected phases. The preliminary model was obtained from the seismic attributes from shot gather 11 starting from prior tomographic results. The amplitudes and instantaneous frequencies were used to constrain the velocity and attenuation structure, with the amplitudes being more sensitive to the velocity gradients and the instantaneous frequencies more sensitive to the attenuation structure. The resulting velocity model has a velocity discontinuity between the upper and lower crust, and lower velocity gradients in the upper and lower crust compared to earlier studies. The attenuation model has Q _p ^-1 values between 0.011 and 0.004 in the upper crust, 0.0019 in the lower crust and a laterally variable Q _p ^-1 in the upper mantle. The Q _p ^-1 values are similar to those found in Archean terranes from other studies. Although the results from a single gather are non-unique, the initial model derived here provides a self-consistent starting point for a more complete seismic attribute inversion for the velocity and attenuation structure.     

计算样本相似性在油气预测中的应用

介绍了计算样本相似性方法在油气预测中的应用的基本原理和技术。提出了利用参数的显著性进行参数优化和加权的方法。该方法简单、实用，并在塔北某区的应用取得了满意结果。由此证明了该方法的有效性及在综合信息预测工作中进行参数优化和加权工作的重要性。     

Application of multi-seismic attributes analysis in the study of distributary channels

During the exploration of stratigraphic reservoirs, the key to locating these reservoirs is to identify the sandstone distribution. Seismic data can be used to recognize large-scale distributary-channel sedimentary bodies; however, depiction of sedimentary bodies in small distributary channels using traditional interpretation data from seismic profiles is extremely difficult. In the Upper Cretaceous first sandstone bed of the third member of the Nenjiang Formation (called the Nen 3 member for simplicity) in the XB area of the southern Songliao basin, distributary channels are the main sedimentary facies. The distributary channels migrate frequently; therefore, it is difficult to precisely depict the morphology of the channel and the distribution of sandstone. In this study, we investigated the deposition of distributary channels using equal-scale formation plane seismic attributes such as post-stack amplitude, instantaneous amplitude and seismic waveform classification, analyzed well logging data from target formations, and mapped the distribution of distributary channels. This study shows that seismic sedimentological study and stacking multiple attribute analysis can identify the distribution of distributary channels precisely and effectively. The attributes of equal-scale strata slices are evidently superior to those of time and horizon slices; Attribute extraction and selection of equal-scale formation slices is an essential step. The comprehensive selection of seismic attributes that show a good correlation to a single-well can be used to clearly depict channel bodies. The overlap of the 40-Hz single-frequency energy and the RMS amplitude depicts the sedimentary characteristics and shapes of sandstone bodies in main channels as well as small-scale distributary channels more clearly than a single attribute. These attributes show that the first sandstone bed of the Nen 3 member was from distributary channels with complex shapes. The distributary channels cut across each other vertically and laterally. It indicates that, during the deposition of the Nen 3 member in XB area, the direction of the main channel is from north to south, and the provenance could be from north and east. The method of this paper may provide some helpful suggestions to the geologist using seismic attributes to undertake research on sedimentary environment at other places in the world.     

坦桑尼亚古元古代姆柏兹地体锆石U-Pb-Hf同位素特征及其指示的构造环境研究

通过研究坦桑尼亚乌本迪变质活动带内姆柏兹地体(初)糜棱岩的锆石U-Pb-Hf同位素特征,认为初糜棱岩物质来源于古老地壳的再循环.对比研究坦桑尼亚鲁呼呼盆地和鲁夸盆地卡鲁超群沉积特征,结合卡鲁超群底部砂岩的碎屑锆石年龄谱系特征,推测鲁夸盆地内卡鲁系的最大沉积时限为晚石炭纪-早二叠纪,其物质来源于乌本迪带或南部伊鲁米德带内的新元古代-寒武纪岩浆岩.通过计算碎屑锆石年龄与地层沉积时代差值的累频分布特征,确定了晚古生代时期的鲁夸沉积盆地构造属性为拉张背景的陆间裂谷.结合本次锆石U-Pb-Hf同位素特征研究和区域地质资料分析结果,认为姆柏兹地体经历了两次俯冲-造山-裂解(伸展)构造旋回,响应了哥伦比亚超大陆、罗迪尼亚超大陆的聚合、裂解.冈瓦纳大陆裂解期间形成的裂谷盆地接受沉积,形成了卡鲁超群沉积.     

生态系统服务弹性敏感性系数的合理性与决策属性探讨

在经济学弹性基本概念的基础之上,采用数学推导的方式重点探讨3种生态系统服务弹性敏感性评价模型的合理性与决策属性。研究结果表明：① Kreuter敏感性系数大小始终为0~1;在极限形式下,生态系统服务价值变率函数与Kreuter敏感性系数具有相同的数学表达式与值域;所以这两种敏感性评价模型把1作为是否敏感的评价标准并不合适。生态系统服务交叉敏感性系数不符合一般意义上的“交叉敏感性”的概念,并且其计算公式不符合弹性的基本定义。② 弹性敏感性计算方式适用于随机变量间的研究,不适用于具有确定性关系的变量;生态系统服务框架下的3种弹性敏感性系数均建立在具有确定性关系的生态系统服务价值计算公式的基础之上,导致其敏感性计算结果缺乏深层次的决策属性。     

黄土丘陵沟壑区县域土壤有机质空间分布特征及预测

分析、预测土壤属性空间变异及其动态是区域土地质量评价和可持续土地利用的一个重要组成部分。在陕西省横山县采集了254个耕层(0~20cm)土样,利用数字地形与遥感影像分析技术,提取了相关地形与遥感指数,分析不同土地利用类型、不同地形条件下土壤有机质空间变异及分布特征,并利用相关因子进行回归预测分析。结果表明,县域土壤有机质平均含量很低,变异性较大。不同土地利用类型土壤有机质差异显著,其中以水稻田有机质含量最高,而林地和灌木林地相对较低。不同土地利用类型土壤有机质含量次序为:水稻田>川地>梯田>坝地>荒草地>坡耕地>林地>灌木林地。不同坡度分析表明,“0~3°”这一坡度等级有机质含量显著高于其它坡度等级;不同坡向有机质含量差异不显著,但不同坡向有机质含量存在一个明显的趋势,阴坡有机质含量整体上要比阳坡高。相关分析表明土壤有机质与高程h呈现负相关关系,与坡向的余弦值COSα正相关,与复合地形指数CTI正相关;土壤有机质和修正后的土壤调节植被指数(MSAVI)以及湿度指数(WI)正相关。利用相关环境变量及遥感指数进行多元线性逐步回归分析,预测结果不甚理想,存在一个平滑效应,对于残差解释相对较低,须进一步研究以更好的解释残差。     

基于地震属性的煤层厚度预测模型及其应用

地震属性技术在岩性和构造解释等方面得到了越来越广泛的应用,特别是在煤、油气资源勘探中具有重要的作用.基于淮南矿区谢桥1区13 1煤层地震勘探资料,提取了28种地震属性数据;通过地震属性的分析,优选出平均峰值振幅、振幅的峰态、最大绝对振幅、瞬时频率斜率等4种地震属性作为煤层厚度预测模型基本参数,结合已知钻孔资料,利用多元多项式回归以及BP人工神经网络方法,求出了各属性与煤厚之间的多元多项式回归模型及人工神经网络模型,并对模型进行了误差分析和应用结果对比分析,反映出人工神经网络模型在煤厚预测中具有好的应用效果.     

地震资料预测薄层厚度方法研究与应用

薄层厚度预测一直是公认的难题之一,其难度就在于如何准确地识别和提取薄层的地震属性.常规方法是利用时间域或频率域地震属性与薄层厚度的线性关系计算.但是理论与实际资料表明,不同的薄层和地层组合对地震波的动力学的信息影响很大,各种参数与薄层厚度成非线性关系,使用单一的信息不可能准确预测薄层厚度.本文利用三种线性预测原理（模型）,经数学变换为属性参数,采用非线性BP网络预测薄层厚度,取得了令人满意的效果.     

邮轮属性评价与品牌定位

以全球最大的邮轮点评网站——邮轮评论家为数据来源渠道,以编辑（Editor/Expert）的文本点评以及对167艘邮轮10大属性的打分数据为样本,利用词频分析、回归分析、聚类分析和方差分析等方法,对全球21个邮轮品牌的产品属性、总体评价以及品牌定位问题进行了系统研究。结果表明,对于专业型游客来说,餐饮、客房和娱乐是关注度最高的船上属性,服务、性价比和公共空间是满意度最高的船上属性,客房、餐饮、公共空间、性价比和娱乐属性对邮轮总评具有显著影响。方差分析表明,与行业界定下的品牌行为相比,基于专业型游客感知的品牌划分更有效。