The efifect of wave breaking on surface wave imaging by Synthetic Aperture Radar

The effect of ocean wave breaking as a non-Bragg mechanism on backscattering cross-section and modulation transfer functions (MTF) of radar was investigated based on Bragg resonance theory and parametric method. The result showed that the additional effect of wave breaking on backscattering cross-section is not more than 20% except for the small incident angle of VV polarized electromagnetic (e.m.) wave but is significant for HH polarized e.m. wave. Breaking waves lead to increase in the modulus of tilt modulation MTF and the larger the wind speed, the faster the increase. For large incident angle, the modulus of tilt modulation MTF with wave breaking decreases quickly with incident angle for HH polarization and approach to that without wave breaking for VV polarization. The hydrodynamic MTF increases 30%-60% when considering wave breaking and the increase is larger for HH polarization than for VV polarization.     

Synthetic SH seismograms in a laterally varying medium by the discrete wavenumber method

Summary. We present a new method to calculate the SH wavefield produced by a seismic source in a half-space with an irregular buried interface. The diffracting interface is represented by a distribution of body forces. The Green's functions needed to solve the boundary conditions are evaluated using the discrete wavenumber method. Our approach relies on the introduction of a periodicity in the source-medium configuration and on the discretization of the interface at regular spacing. The technique developed is applicable to boundaries of arbitrary shapes and is valid at all frequencies. Some examples of calculation in simple configurations are presented showing the capabilities of the method.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

人工合成烃类流体包裹体测温数据对石油地质的指示

石油地质中,通常使用流体包裹体的数据来恢复油气捕获时候的温度与压力。为了探讨这些温度和压力真实地质意义,我们通过设定的温度和压力人工合成烃类包裹体,并通过测量烃类包裹体和同期捕获的水包裹体的均一温度,来解释地质中的现象。     

短周期仪器记录在远震分析中的应用

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。     

中国三个大地震的震源参数及讨论

大地震的震源机制及地震矩、应力降等参数,不(又对认识地震的破裂过程,而且对预报强地面运动都是非常重要的。一些文章对板内地震应力降的特点、地震矩与高频源谱的关系及区域特征的讨论,使我们可直接由长周期体波或面波得出的地震矩M₀估计出不同地区中大地震的高频源谱,以供强地面运动预报参考。 由于对发生在中国板内的1976年11月6日盐源地震（M_s=6.5）和1976年11月15日宁河地震（M_s=6.3）的震源参数还没有详尽的报道;另外,对1973年7月14日     

弹性波的三维有限元模拟

本文讨论了弹性波瞬态传播问题的三维有限元计算方法及当前存在的实际困难.针对要求计算机内存大和计算时间长的问题,采取了改进措施.由于采用了集中质量矩阵和修正的中心差分时间积分显格式相结合的方法,可以使计算机内存和计算时间大为减少;由于采用结点定位法,最适合用于目前发展的并行计算机系统,可使计算速度大大增快;还采用了有效激发震源法,有效激发区是随时间步进的增加而逐步增大,这不仅能节省计算时间,而且使波场的传播过程一目了然,本文计算了由两种介质组成的三维楔形问题,得到若干典型剖面的瞬时波场图及随时间变化的合成地震图.     

A way to synchronize models with seismic faults for earthquake forecasting: Insights from a simple stochastic model

Numerical models are starting to be used for determining the future behaviour of seismic faults and fault networks. Their final goal would be to forecast future large earthquakes. In order to use them for this task, it is necessary to synchronize each model with the current status of the actual fault or fault network it simulates (just as, for example, meteorologists synchronize their models with the atmosphere by incorporating current atmospheric data in them). However, lithospheric dynamics is largely unobservable: important parameters cannot (or can rarely) be measured in Nature. Earthquakes, though, provide indirect but measurable clues of the stress and strain status in the lithosphere, which should be helpful for the synchronization of the models.The rupture area is one of the measurable parameters of earthquakes. Here we explore how it can be used to at least synchronize fault models between themselves and forecast synthetic earthquakes. Our purpose here is to forecast synthetic earthquakes in a simple but stochastic (random) fault model. By imposing the rupture area of the synthetic earthquakes of this model on other models, the latter become partially synchronized with the first one. We use these partially synchronized models to successfully forecast most of the largest earthquakes generated by the first model. This forecasting strategy outperforms others that only take into account the earthquake series. Our results suggest that probably a good way to synchronize more detailed models with real faults is to force them to reproduce the sequence of previous earthquake ruptures on the faults. This hypothesis could be tested in the future with more detailed models and actual seismic data.     

Flocculation improves uptake of Sr and Cs from radioactive effluents

This paper presents the results of investigation on uptake of radioactive species ⁹⁰Sr and ¹³⁷Cs present in the liquid effluents from nuclear processing plants. Chemical precipitation process is adopted to remove radioactivity from the effluents with low and intermediate level of activity. In this process, radioactive ⁹⁰Sr and ¹³⁷Cs are co-precipitated along with copper ferrocyanide, ferric hydroxide and either calcium phosphate or barium sulphate. These precipitates being fine in size require flocculation for enhanced settling rate in clarifier/thickener. The flocculation by some selected high molecular weight polyacrylamide based polymers has improved the uptake of radioactive metal ions. The adsorption of these radioactive species has been found to increase in the presence of these flocculants thereby improving the decontamination factor (DF). While flocculating the precipitates, there may be some complex formation with Sr²⁺/Cs⁺, flocculant and the substrate. This has enhanced the uptake of the radioactive metal ions from the liquid component. The plant trials have indicated the improvement of DF value due to flocculation by cationic flocculant.