Efficiency analysis of open trench for impact pile driving through a single-variable method

Abstract

The ground vibrations during pile driving operation have a drastic potential to undermine the surrounding structures both in land and reclaimed land. Particularly, reclaimed land necessitates ample application of pile driving due to the weak land condition. To prevent the structural damage, attenuation of the ground vibrations to an allowable level through active isolation of circular open trench is the scope of this study. In this research, finite element simulations of continuous impact pile driving process from the ground surface was executed with particular attention to the pile-soil interaction, and thereby, the efficiency of open trench application in attenuation of the unsafe distance of different structures was surveyed using the vibration sensitivity degree. Regarding the crucial parameters of an open trench (depth, width, and location), it was concluded that a sufficient high depth can attenuate the unsafe distance up to 68%, the trench width variations are less effective, and an average pile-trench distance is the most efficient option. The excavation volume was also concluded as another crucial parameter in open trench design which takes all three parameters into account. The trench depth equal to the pile’s maximum critical depth of vibration was inferred for an optimum design.     

A Numerical Model for Natural Backfill of Pipeline Trenches Subjected to Unidirectional／Oscillatory Flows

A numerical model for the self-burial of a pipeline trench is developed. Morphological evolutions of a pipeline trench under steady-current or oscillatory-flow conditions are simulated with/without a pipeline inside the trench. The oscillatory flow in this study represents the action of waves. The two-dimensional Reynolds-averaged continuity and Navier-Stokes equations with the standard k-e turbulence closure, as well as the sediment transport equations, are solved with the finite difference method in a eurvilirrear coordinate system. Both bed and suspended loads of sediment transport are included in the morphological model. Because of the lack of experimental data on the backfilling of pipeline trenches, the numericalmodel is firstly verified against three closely-relevant experiments available in literature. A detailed measurement of the channel migration phenomenon under steady currents is employed for the assessment of the integral performance of themodel. The two experimental results from U-tube tests are used to validate the model‘s ability in predicting oscillatory flows. Different time-marching schemes are employed for the morphological computation under unidirectional and oscillatory conditions. It is found that vortex motions within the trench play an important role in the trench development.     

Shallow seismicity, stress distribution and crustal deformation pattern in the Andaman-West Sunda arc and Andaman Sea, northeastern Indian Ocean

Shallow seismicity and available source mechanisms in the Andaman–westSunda arc and Andaman sea region suggest distinct variation in stressdistribution pattern both along and across the arc in the overriding plate.Seismotectonic regionalisation indicates that the region could be dividedinto eight broad seismogenic sources of relatively homogeneousdeformation. Crustal deformation rates have been determined for each oneof these sources based on the summation of moment tensors. The analysisshowed that the entire fore arc region is dominated by compressive stresseswith compression in a mean direction of N23^°, and the rates ofseismic deformation velocities in this belt decrease northward from 5.2± 0.65 mm/yr near Nias island off Sumatra and 1.12 ±0.13 mm/yr near Great Nicobar islands to as much as 0.4 ±0.04 mm/yr north of 8^°N along Andaman–Nicobar islandsregion. The deformation velocities indicate, extension of 0.83 ±0.05 mm/yr along N343^° and compression of 0.19 ±0.01 mm/yr along N73^° in the Andaman back arc spreadingregion, extension of 0.18 ± 0.01 mm/yr along N125^° andcompression of 0.16 ± 0.01 mm/yr along N35^° in NicobarDeep and west Andaman fault zone, compression of 0.84 ±0.12 mm/yr N341^° and extension of 0.77 ± 0.11 mm/yralong N72^° within the transverse tectonic zone in the Andamantrench, N-S compression of 3.19 ± 0.29 mm/yr and an E-Wextension of 1.24 ± 0.11 mm/yr in the Semangko fault zone ofnorth Sumatra. The vertical deformation suggests crustal thinning in theAndaman sea and crustal thickening in the fore arc and Semangko faultzones. The apparent stresses calculated for all major events range between0.1–10 bars and the values increase with increasing seismic moment.However, the apparent stress estimates neither indicate any significantvariation with faulting type nor display any variation across the arc, incontrast to the general observation that the fore arc thrust events showhigher stress levels in the shallow subduction zones. It is inferred that theoblique plate convergence, partial subduction of 90^°E Ridge innorth below the Andaman trench and the active back arc spreading are themain contributing factors for the observed stress field within the overridingplate in this region.     

Temporal variations in magma composition at Merapi Volcano (Central Java, Indonesia): magmatic cycles during the past 2000 years of explosive activity

Merapi Volcano (Central Java, Indonesia) has been frequently active during Middle to Late Holocene time producing basalts and basaltic andesites of medium-K composition in earlier stages of activity and high-K magmas from 1900 ¹⁴C yr BP to the present. Radiocarbon dating of pyroclastic deposits indicates an almost continuous activity with periods of high eruption rates alternating with shorter time spans of distinctly reduced eruptive frequency since the first appearance of high-K volcanic rocks. Geochemical data of 28 well-dated, prehistoric pyroclastic flows of the Merapi high-K series indicate systematic cyclic variations. These medium-term compositional variations result from a complex interplay of several magmatic processes, which ultimately control the periodicity and frequency of eruptions at Merapi. Low eruption rates and the absence of new influxes of primitive magma from depth allow the generation of basaltic andesite magma (56–57 wt% SiO₂) in a small-volume magma reservoir through fractional crystallisation from parental mafic magma (52–53 wt% SiO₂) in periods of low eruptive frequency. Magmas of intermediate composition erupted during these stages provide evidence for periodic withdrawal of magma from a steadily fractionating magma chamber. Subsequent periods are characterised by high eruption rates that coincide with shifts of whole-rock compositions from basaltic andesite to basalt. This compositional variation is interpreted to originate from influxes of primitive magma into a continuously active magma chamber, triggering the eruption of evolved magma after periods of low eruptive frequency. Batches of primitive magma eventually mix with residual magma in the magmatic reservoir to decrease whole-rock SiO₂ contents. Supply of primitive magma at Merapi appears to be sufficiently frequent that andesites or more differentiated rock types were not generated during the past 2000 years of activity. Cyclic variations also occurred during the recent eruptive period since AD 1883. The most recent eruptive episode of Merapi is characterised by essentially uniform magma compositions that may imply the existence of a continuously active magma reservoir, maintained in a quasi-steady state by magma recharge. The whole-rock compositions at the upper limit of the total SiO₂ range of the Merapi suite could also indicate the beginning of another period of high eruption rates and shifts towards more mafic compositions.     

Cenozoic Plate interaction of the Australia and Philippine Sea Plates: “hit-and-run” tectonics

Recent studies in northwest New Guinea have shown the presence of at least two marginal basins of different age, both of which formed in back-arc settings. The older basin opened between the Middle Jurassic and Early Cretaceous, a remnant of which is now preserved as the New Guinea Ophiolite. Its obduction started at 40 Ma and it was finally emplaced on the Australian margin at 30 Ma. The younger basin was active during the Oligocene to Middle Miocene and was obducted in the Early Pliocene. Studies of the western edge of the Philippine Sea also reveal an important deformation of the Philippine arc in the Oligocene, which hitherto has remained unexplained. Using information from these systems, paleomagnetic results, kinematic reconstructions and geochemistry of the supra-subduction ophiolite, we present a plate model to explain the region's Eo–Oligocene development. We suggest that an extensive portion of oceanic crust extended the Australian Plate a considerable distance north of the Australian Craton. As Australia began its steady 7–8 cm/year northward drift in the Early Eocene, this lithosphere was subducted. Thus, the portion of the Philippine Sea Plate carrying the Taiwan–Philippine Arc to its present site may have actually been in contact with the ophiolite now in New Guinea and obduction led to deformation of the Philippine Sea Plate itself. Neogene Plate kinematics transported the deformed belt in contact with the Sunda block in the Late Miocene and Pliocene. This interpretation has implications for the origin for the Philippine Sea Plate and the potential incorporation of continental fragments against its boundaries.     

拦河坝砼防渗墙的施工技术

拦河坝砼防渗墙多在砂层与砂卵石层上施工，地基处理根据地质条件选择，施工方法有无导孔挖槽导孔挖槽，冲击成槽，回转钻成槽，锯槽机成槽，锯槽机为新型防渗成墙材料提供了新的施工手段，但有局限性。     

Urban stormwater thermal gene expression models for protection of sensitive receiving streams

Thermal impact of typical high‐density residential, industrial, and commercial land uses is a major concern for the health of aquatic life in urban watersheds, especially in smaller, cold, and cool‐water streams. This is the first study of its kind that provides simple easy‐to‐use equations, developed using gene expression programming (GEP) that can guide the assessment and the design of urban stormwater management systems to protect thermally sensitive receiving streams. We developed 3 GEP models using data collected during 3 years (2009–2011) from 4 urban catchments; the first GEP model predicts event mean temperature at the inlet of the pond; the second model predicts the stormwater temperature at the outlet of the pond; and the third model predicts the temperature of the stormwater after flowing through a cooling trench and before discharging to the receiving stream. The new models have high correlation coefficients of 0.90–0.94 and low prediction uncertainty of less than 4% of the median value of the predicted runoff temperatures. Sensitivity analysis shows that climatic factors have the highest influence on the thermal enrichment followed by the catchment characteristics and the key design variables of the stormwater pond and the cooling trench. The general method presented here is easily transferable to other regions of the world (but not necessarily the exact equations developed here); also through sensitivity and parametric analysis, we gained insight on the key factors and their relative importance in modelling thermal enrichment of urban stromwater runoff.     

高密度电法在草炭土分布特征调查中的应用

为了更好的研究草炭土湿地基本信息,获取草炭土分布特征,选择吉林省东部沼泽草炭土湿地为研究对象,运用高密度电阻率法,对比不同装置下探测结果的差异,再与已知的探槽资料做对比,得出温纳—施伦贝格装置为最可靠、最合理的探测装置。再将该装置运用到其他草炭土地区,得出对草炭土湿地的探测为浅层地质问题,草炭土的视电阻率为50~300Ω·m,深度为1.2~3.9 m,在反演图像中表现为低阻体部分,各地层间层状结构明显,电性界限分明。     

雅浦海沟南缘铁锰结核矿物与地球化学特征及其成因研究

本文采用X射线衍射、全岩地球化学和电子探针等测试方法,对雅浦海沟南部附近海域获得的铁锰结核样品进行了显微构造、矿物和地球化学分析,并探讨了其成因。结果表明:铁锰结核的显微构造主要包括平行纹层构造、柱状构造、叠层状构造和同心环状构造;显微构造和探针结果显示铁锰结核在生长初期处于底部海洋动力比较强烈的环境,后期生长环境逐渐趋于稳定;铁锰结核的矿物组分以水羟锰矿、钠水锰矿、石英和钙十字石为主;样品中Fe、Mn元素含量较高且含量比较接近,Cu、Co、Ni和REE相对富集,REE分布模式整体比较平缓并都出现较强的Ce正异常和重稀土元素亏损现象;文中两块铁锰结核都为水成成因,成矿物质主要来自同期的海水沉淀,同时也受一定海底火山物质和陆源风尘物质的影响。     

Sea level induced variations in clay mineral composition in the southwestern South China Sea over the past 17,000 yr

Variations in clay mineral composition of sediment cores from the margin and continental slope of the Sunda Shelf (southern South China Sea, SE Asia) covering the past 17,000 yr reflect changing influences of sediment sources together with clay mineral partitioning processes in shallow waters. We identify the deglacial sea level rise as the principal factor driving these changes. During the late glacial, high values of kaolinite are interpreted to reflect a higher contribution of clays from soils that have formed on the exposed Sunda Shelf and in the southern archipelagos of Indonesia. At this time core sites were located in close proximity to the mouths of the Sunda Shelf palaeo-drainage systems on the emerged shelf (“Sundaland”). The progressive landward displacement of the coastline and breakdown of these vast drainage systems during deglaciation led to a decrease in influence of the kaolinite-rich southern sources. When the coastline had retreated closely to its present-day position in mid-Holocene times, the former dominance of southern sources was replaced by a stronger influence of illite-rich sources (e.g. Borneo). The overriding control of sea level changes on the clay mineral distribution patterns precludes a definite climatic interpretation of clay mineral data in terms of climatic/monsoonal changes in such highly dynamic sedimentary environment.