Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …     

Non-Newtonian topographic relaxation on Europa

Models of topographic support on Europa by lateral shell thickness variations have previously assumed a Newtonian ice viscosity. Here I show that using a more realistic stress-dependent viscosity gives relaxation times which can be significantly different. Topography of wavelength 100 km cannot be supported by lateral shell thickness variations for ∼50 Myr, unless the shell thickness is <10 km or the ice grain size >10 mm. Shorter wavelength topography would require even thinner shells, but may be supported elastically. Global-scale variations in shell thickness, however, can be supported for geological timescales if the shell thickness is O(10 km).     

Rapid climatic changes recorded in loess successions

Detailed grain-size analyses, both in China and western Europe, indicate the occurrence of short climatic cycles during loess deposition of the last glacial. Cold episodes coincided with enhanced deposition of relatively coarse loess and alternated with relatively warmer episodes with decreased deposition of finer loess and soil formation. In Europe, these oscillations may coincide with alternations of permafrost development and degradation. The short-term climatic events in the loess sections are similar to the Dansgaard–Oeschger events in ice-core records.     

沉积物粒度分析在厦门市第四纪环境研究和地层划分对比中的应用

采用MS2000型激光粒度分析仪进行测试，利用计算机粒度分析软件对数据进行整理和计算，绘制出样品的频率曲线、概率累积曲线以及粒度众数位值曲线等图件并进行沉积环境分析。厦门地区第四纪环境演化经历了中更新世同安组(含泥中粗砂、含泥细中砂、砂为主)海积一冲积一更新统上部龙海组(含泥粗中砂、含泥细中砂、含泥粗砂、粗砂、细中砂、含细砾中粗砂、中细砂等)冲积一洪冲积一更新世上部东山组(砂、砂砾、含泥中粗砂、粗砂、泥质中细砂、细砂、中粗砂等)冲洪积及部分海积(粉砂、细粉砂、含碳质泥、粘土、淤泥质粘土、粉砂质粘土等)一全新世长乐组(粉砂，淤泥质粘土、粉砂质粘土、碳质粘土、含砂淤泥质粘土，粉砂质亚粘土、粉细砂亚粘土等)海湾沉积。在解释环境变化的同时，说明粒度变化曲线在一定程度上可以作为地层划分的依据之一，并以此对研究区地层进行了详细划分。     

武鸣伊岭纹理石资源的开发利用前景

文章论述了伊岭纹理石资源的利用价值、空间分布、开发条件和开发措施。     

Middle Stone Age starch acquisition in the Niassa Rift, Mozambique

The quest for direct lines of evidence for Paleolithic plant consumption during the African Middle Stone Age has led scientists to study residues and use-wear on flaked stone tools. Past work has established lithic function through multiple lines of evidence and the spatial breakdown of use-wear and microscopic traces on tool surfaces. This paper focuses on the quantitative analysis of starch assemblages and the botanical identification of grains from flake and core tools to learn about human ecology of carbohydrate use around the Niassa woodlands, in the Mozambican Rift. The processing of starchy plant parts is deduced from the occurrence of starch assemblages that presumably got attached to stone tool surfaces by actions associated with extractive or culinary activities. Specifically, we investigate starch grains from stone tools recently excavated in northern Mozambique at the site of Mikuyu; which presumably spans the middle to late Pleistocene and represents similar sites found along the Malawi/Niassa corridor that links East, Southern, and Central Africa. Starch was extracted and processed with a diverse tool kit consisting of scrapers, cores, points, flakes, and other kinds of tools. The microbotanical data suggests consumption of seeds, legumes, caryopses, piths, underground storage organs, nuts, and mesocarps from more than a dozen families. Our data suggest a great antiquity for starch use in Africa as well as an expanded diet and intensification.     

Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

Variation of infiltration rate through karstic surfaces due to land use changes: A case study in Murgia (SE-Italy)

Groundwaters of the Murgia carbonate aquifer represent the main groundwater resource of the Apulia region (SE Italy). In the highlands (Alta Murgia) karst crops out in different forms and textures which have been preserved up to the 1970s: little evolved agriculture and sheep rearing produced only a marginal modification of the epikarst while a high degree of division into parcels by drystone walls helped in preserving soils from erosion. In the last years the original scenery of the Alta Murgia changed due to widespread transformations of surface karstic textures for agricultural purposes, with undeniable negative consequences on the hydrogeological balance, concerning both the infiltration and the runoff terms. Stone shattering led to flattening and deep alteration of a large part of the original karstic landscape and to demolition of drystone walls.In a study area of about 139 km² located in the Alta Murgia, the comparison of aerial photos related to the period 1950–2001 indicated that stone shattering had occurred for about 42% of the area.The hydrological behaviour of the first soil layer of experimental parcels representing both shattered stone and natural karstic surface textures was analysed by using the numerical model Hydrus-2D with the aim of estimating the variation on infiltration rate due to stone shattering. Intensive field and laboratory measurements concerned soil texture, soil water content, pressure head, saturated hydraulic conductivity, pan evaporation and meteorological parameters.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.