Low temperature volatile production at the Lost City Hydrothermal Field, evidence from a hydrogen stable isotope geothermometer

Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH₄ and δD-H₂ values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.     

Production of carbonate and silica nano-particles in stirred bead milling

This paper presents the experimental results of the mechanical production of silica and carbonate colloidal particles below 100 nm using two types of stirred bead mills (i.e., DCP Superflow 12 and PML H/V). It is shown that the stirred bead mill with very small beads can be used as an efficient equipment for the production of the colloidal particles in nanoscale from the feed materials of several microns in sizes at high energy consumptions. The DCP Superflow mill with high power densities is superior for the effective size reduction and production rate, compared to the conventional PML H/V mill with lower power densities. The smaller particles could be produced by the DCP Superflow mill at the same level of high energy inputs as from the PML H/V mill. The “grinding limit” for the processes in the mills has been discussed.     

Dissolved silica budget in the North basin of Lake Lugano

We studied the dissolved silica cycle in the water column of the North basin of Lake Lugano, Switzerland/Italy. Lake Lugano is a meromictic, eutrophic lake, permanently stratified below 100-m depth. A one-box model was used to calculate a silica mass-balance over 1993, based on various lake measurements, such as sediment traps, sediment cores, water analysis and biota countings. We found that the North basin of Lake Lugano is at steady state as far as dissolved silica is concerned. The primary source of dissolved silica in the lake is river input (about 80%), with diffusion from bottom sediments and groundwater input also playing a role. Atmospheric input is negligible. The main export of dissolved silica occurs via biogenic uptake by diatoms and final burial of their frustules in the bottom sediment. Loss of dissolved silica through the lake outflow only represents 15% of the total output. Of the total amount of Si exported to the lake bottom through diatom sinking, less than 20% is re-supplied to the surface water by diffusion. Thus, the lake acts as an important permanent sink for silica. The long residence time of dissolved silica in the lake (7 years) is related to the strong physical stratification of the lake. Only about 10% of the standing stock are available to phytoplankton uptake.     

Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey

Thermal waters hosted by Menderes metamorphic rocks emerge along fault lineaments in the Simav geothermal area. Thermal springs and drilled wells are located in the Eynal, Çitgöl and Na a locations, which are part of the Simav geothermal field. Studies were carried out to obtain the main chemical and physical characteristics of thermal waters. These waters are used for heating of residences and greenhouses and for balneological purposes. Bottom temperatures of the drilled wells reach 163°C with total dissolved solids around 2225 mg/kg. Surface temperatures of thermal springs vary between 51°C and 90°C. All the thermal waters belong to Na–HCO₃–SO₄ facies. The cold groundwaters are Ca–Mg–HCO₃ type. Dissolution of host rock and ion-exchange reactions in the reservoir of the geothermal system shift the Ca–Mg–HCO₃ type cold groundwaters to the Na–HCO₃–SO₄ type thermal waters. Thermal waters are oversaturated at discharge temperatures for aragonite, calcite, quartz, chalcedony, magnesite and dolomite minerals giving rise to a carbonate-rich scale. Gypsum and anhydrite minerals are undersaturated with all of the thermal waters. Boiling during ascent of the thermal fluids produces steam and liquid waters resulting in an increase of the concentrations of the constituents in discharge waters. Steam fraction, y, of the thermal waters of which temperatures are above 100°C is between 0.075 and 0.119. Reservoir pH is much lower than pH measured in the liquid phase separated at atmospheric conditions, since the latter experienced heavy loss of acid gases, mainly CO₂. Assessment of the various empirical chemical geothermometers and geochemical modelling suggest that reservoir temperatures vary between 175°C and 200°C.     

Chemical equilibria of thermal waters for the application of geothermometers from the Guanzhong basin, China

In this study, representative samples from thermal wells and springs were chemically analyzed and geothermometers were used to calculate the deep temperatures of geothermal reservoirs on the basis of water–mineral equilibrium. In some cases, however, the chemical components are not in equilibrium with the minerals in the reservoir. Therefore, log(Q/K) diagrams are used to study the chemical equilibrium for the minerals that are likely to participate. The Na–K–Mg triangular diagram is also applied to evaluate the equilibrium of water with reservoir rocks. Standard curves at the reference temperatures are prepared to reveal which type of silica geothermometer is appropriate for the specified condition. This study shows that water samples from geothermal wells W9 and W12 are in equilibrium with the selective minerals, and chalcedony may control the fluid–silica equilibrium. It is estimated that there is an exploitable low-temperature reservoir with possible temperatures of 80–90°C in the Guanzhong basin.     

Melting of β-quartz up to 2.0 GPa and thermodynamic optimization of the silica liquidus up to 6.0 GPa

Melting relations of β-quartz were experimentally determined at 1.0 GPa (1900±20 °C), 1.5 GPa (2033±20 °C), and 2.0 GPa (2145±20 °C) using a new high-pressure assembly in a piston–cylinder apparatus and substantial differences were found with data previously reported. The new melting data of β-quartz were combined and optimized with all available thermodynamic, volumetric, and phase equilibria data for β-cristobalite, β-quartz and coesite to produce a P–T liquidus diagram for silica valid up to 6.0 GPa. Using the new optimized thermodynamic parameters, the invariant point β-cristobalite+β-quartz+liquid and β-quartz+coesite+liquid were determined to lie at 1687±17 °C and 0.457 GPa, and 2425±25 °C and 5.00 GPa, respectively.     

An Experimental Calibration on the Sphalerite-Galena Sulfur Isotope Geothermometer

A new experimental calibration was undertaken in this study to get a more reliable sphalerite-galena sulfur isotope geothermometer. The experimental conditions selected in study were very similar to those of natural hydrothermal solution. The high-precision SF6 method was used in sulfur isotope analyses. The obtained calibration curve for sulfur isotope fractionation between sphalerite and galena can be expressed with the equation 10001nαSp-Gn= 0.74×106T-2+0.08.     

Determination of silica sand stiffness

Site investigation and evaluation of properties of soil or rock are important aspects of geotechnical design. Determination of the ground stiffness is one of the important parameters in geotechnical engineering. Since the measurement of shear modulus is very sensitive to soil disturbance, especially for sand, determination of the stiffness of soil in the field is more reliable than in laboratory tests on sampled specimens. Measurement of shear modulus is one of the most common applications of self-boring pressuremeter testing. As an in situ device, the pressuremeter provides a unique method for assessing directly the in situ shear modulus of a soil. This paper describes a laboratory study of silica sand stiffness, which varies with stress level and strain amplitude. The results show that the elastic shear modulus value is mainly dependent on the value of the mean effective stress and relative density.     

高压超高压变泥质岩适用的地质温压计评述

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。     

Fossilisation of a silica diagenesis reaction front on the mid-Norwegian margin

The diagenetic transformation of biogenic silica from opal-A to opal-CT was recognised on seismic reflection data over an area of 78 × 10³ km² on the mid-Norwegian margin. The opal-A/CT diagenetic boundary appears as a positive, high amplitude reflection that generally cross-cuts the hosting stratigraphy. We demonstrate that it is not a sea bottom simulating reflection (BSR) and also that is not in thermal equilibrium with the present day isotherms. We present arguments that three styles of deformation associated with the opal-A/CT reflection – polygonal faulting, regional anticlines and synclines and differential compaction folding – indicate that the silica diagenesis reaction front is fossilised at a regional scale. Isochore maps demonstrate the degree of conformity between the opal-A/CT reflection and three seismic horizons of Late Miocene to Early Pliocene age that potentially represent the paleo-seabed when ‘fossilisation’ of the reaction front took place. The seismic interpretational criteria for recognition of a fossilised diagenetic front are evaluated and the results of our study are integrated with previous studies from other basins of the NE Atlantic in order to determine if the arrest of silica diagenesis was diachronous along this continental margin.