A three-dimensional wave field over a bidirectionally periodic ripple bottom

For gravity wave trains propagating over an arbitrary wavy bottom, a perturbation expansion is developed to the second order so that the Bragg resonance effect of the ripple bottom on the free-surface wave can be analyzed. Both the resonant and non-resonant cases are treated and the singular behavior at resonance is avoided. This theory is successfully verified by reducing to simpler situations. Then, the analytical results for the special case of a unidirectional sinusoidal bottom are compared with experimental data for validation.     

The dimensions of sand ripples in full-scale oscillatory flows

New large-scale experiments have been carried out in two oscillatory flow tunnels to study ripple regime sand suspension and net sand transport processes in full-scale oscillatory flows. The paper focuses on ripple dimensions and the new data are combined with existing data to make a large dataset of ripple heights and lengths for flows with field-scale amplitudes and periods. A feature of the new experiments is a focus on the effect of flow irregularity. The combined dataset is analysed to examine the range of hydraulic conditions under which oscillatory flow ripples occur, to examine the effects of flow irregularity and ripple three-dimensionality on ripple dimensions and to test and improve existing methods for predicting ripple dimensions.The following are the main conclusions. (1) The highest velocities in a flow time-series play an important role in determining the type of bedform occurring in oscillatory flow. Bedform regime is well characterised by mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth peak velocities in the case of irregular flow. (2) For field-scale flows, sand size is the primary factor determining whether equilibrium ripples will be 2D or 3D. 2D ripples occur when the sand D₅₀ ≥ 0.30 mm and 3D ripples occur when D₅₀ ≤ 0.22 mm (except when the flow orbital diameter is low). (3) Ripple type (2D or 3D) is the same for regular and irregular flows and ripple dimensions produced by equivalent regular and irregular flows follow a similar functional dependence on mobility number, with mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth velocities in the case of irregular flow. For much of the ripple regime, ripple dimensions have weak dependency on mobility number and ripple dimensions are similar for regular and irregular flows with the same flow orbital amplitude. However, differences in ripples produced by equivalent regular and irregular flows become significant at the high mobility end of the ripple regime. (4) Ripple dimensions predicted using the Wiberg and Harris formulae are in poor agreement with measured ripple dimensions from the large-scale experiments. Predictions based on the Mogridge et al. and the Nielsen formulae show better overall agreement with the data but also show systematic differences in cases of 3D ripples and ripples generated by irregular flows. (5) Based on the combined large-scale data, modifications to the Nielsen ripple dimension equations are proposed for the heights and lengths of 2D ripples. The same equations apply to regular and irregular flows, but with mobility number appropriately defined. 3D ripples are generally smaller than 2D ripples and estimates of 3D ripple height and length may be obtained by applying multipliers of 0.55 and 0.73 respectively to the 2D formulae. The proposed modified Nielsen formulae provide an improved fit to the large-scale data, accounting for flow irregularity and ripple three-dimensionality.     

黑龙江省及其邻区非构造性地震振动研究

应用周期-频度谱方法对黑龙江省数字地震台网资料进行处理，给出了矿震、电缆应力释放、震源车作业、火山地震等振动的周期-频度谱和链波指数，并对构造地震和爆破的链波指数进行了讨论。针对港震公司的数字地震记录格式编写了专门的处理程序，为数字地震台站开展周期-频度谱分析提供了有力的工具。     

A multi-frequency Acoustic Concentration and Velocity Profiler (ACVP) for boundary layer measurements of fine-scale flow and sediment transport processes

The use of acoustics to measure sediment transport boundary layer processes has gained increasing acceptance over the past two decades. This has occurred through the development of increasingly sophisticated measuring systems and theoretical developments, which have enabled flow and suspended sediment parameters to be obtained from acoustic data with a high degree of accuracy. Until relatively recently, separate acoustic systems were used to measure flow and suspended sediment concentration. Over the past few years, however, the technology has become sufficiently advanced so that flow and sediment measurements can be integrated into a single system. This integration provides, quasi-instantaneous, non-intrusive, co-located, high temporal-spatial resolution measurements of benthic flow and sediment processes. Here the development of such an instrument, the Acoustic Concentration and Velocity Profiler (ACVP) is described. The theory underpinning its application is outlined, new approaches to velocity de-aliasing and suspended sediment inversion instabilities using multi-frequency capabilities are presented and the application of the system to sediment transport processes over a sandy ripple bed is illustrated. The observations clearly show the value of such instrumentation for studying the dynamical interaction between the bed, the flow and the sediments at and within the bottom boundary layer.     

Parameterization of bedform morphology and defect density with fingerprint analysis techniques

A novel method for parameterizing the morphology of seafloor ripples with fingerprint analysis numerical techniques is presented. This fully automated analysis tool identifies rippled areas in two-dimensional imagery of the seafloor, and returns ripple orientation and wavelength as well as a new morphological parameter, the spatial density of ripple defects. In contrast to widely used manual and spectral parameterization methods, this new technique yields a unique probability distribution for each derived parameter, which describes its spatial variability across the sampled domain. Here we apply this new analysis technique to synthetic and field collected side-scan sonar seafloor images in order to assess the methods capacity to define bed geometry across a wide range of simulated and observed morphological conditions. The resulting orientation and wavelength values compare favorably with those of the existing manual and spectral parameterization methods, and are superior under environmental conditions characterized by low signal to noise ratios as well as high planform ripple sinuosity. Furthermore, the resulting ripple defect density values demonstrate correlation with ripple orientation, wave direction, and the Shields parameter, which is consistent with recent investigations that have theoretically linked this parameter to hydrodynamic forcing conditions. The presented fingerprint analysis method surpasses the capacity of existing methods for ripple parameterization and promises to yield greater insight into theoretical and applied problems associated with the temporal and spatial variability of ripple morphology across a wide spectrum of marine environments.     

The price ripple effect in the Vancouver housing market

Attempts to model the dynamic characteristics of a housing market include examining the spatial diffusion of price changes from an epicenter through a regional or national network of geographic units. Less common has been the study of a ripple effect of price changes within a single metropolitan area, with implications for the erosion of residential affordability. Such trends have particular salience within the Vancouver metropolitan area, the least affordable housing market in North America. Using quarterly price data from local real estate boards, we examine price changes through municipal regions from 2005–2017, a period including several externally-induced price shocks. Several techniques test for a ripple effect in price movements. A time lag of three months consistently exists in the communication of price shocks from an originating epicenter to other parts of the metropolitan region, with longer lags with several more distant municipalities, confirming the presence of an intra-metropolitan ripple effect.     

Ripple/dune to upper stage plane bed transition: Some observations from the ancient record

In two Proterozoic sandstones, of the Indian shield cross-stratification and cross-lamination are observed to grade continuously into parallel-laminations often bearing parting lineations. These are interpreted as having resulted from a gradual transition from ripple/dune to upper stage plane bed structures. During the transition the inclination of the cross-strata diminishes and their shape changes from concave-up to sigmoidal. The sigmoidal cross-strata are characterized by well defined topsets, foresets and toesets and the topsets bear parting lineations. In the course of the transition sigmoidal cross-strata may give way either to horizontal parallel-lamination or inclined parallel-lamination. In the former the toesets of the successive sigmoidal cross-strata thicken and the thickness of the cross-strata beyond the brink point (the junction between the topset and foreset) tends to become uniform until a plane-bed state is reached and horizontal parallel-laminations are formed. In the latter the topset of the successive sigmoidal cross-strata increases in length at the expense of the foreset and toeset until the brink point ceases to exist so that only the topset laminations prevail and appear as inclined parallel-laminations. These transitions presumably result from a gradual increase in flow intensity beyond the stability limits of ripples/dunes. The progressive morphological changes of the cross-stratification over the transition are attributed to changing fallout patterns on the lee face of the bedforms in response to increasing flow intensity. Preservation of the records of such transitions suggests an abundant supply of sand grade sediments from suspension during the transition, shaping the sediment concentration profile over the bedforms and facilitating turbulence suppression. The variation in the pattern of transition from sigmoidal cross-stratification to parallel-lamination may be the result of different rates of sediment feed from the prevailing suspended sediment load in the two instances.     

The chemistry and mineralogy of some South Australian calcretes and associated soft carbonates and their dolomitisation

The chemistry and. mineralogy of calcretes and associated calcareous fine earth from the lower River Murray Basin and Yorke Peninsula in South Australia suggest that the carbonate material was deposited as a continuous unit and subsequently modified. At each site examined the Ca/Mg ratio progressively decreases with increasing depth, and where data are available, a similar decrease in the Ca/Sr ratio is observed. This sequence is independent of the hardness or physical condition of the carbonate. In some places the carbonate from the lowest horizons is nearly pure dolomite. The change in Ca/Mg ratio with depth is considered to be due to leaching, probably during periods of the past when the climate was less arid and the rainfall penetrated to about 2 m.

In the lower Murray Basin the Ca/Mg ratio of the surface calcrete horizon progressively increases from Tailetn Bend N to Sedan, and the silicate clay fraction changes from sepiolite at Tailem Bend, to palygorskite at Murray Bridge and illite at Sedan. The bedrock also varies, from magnesium‐rich amphibolites at Tailem Bend to granite at Sedan and, further, there is an apparent relation between the chemistry of the non‐carbonate fraction of the calcretes and the underlying rock. The original carbonate deposit probably formed in lakes of different chemistry, and has been modified by solution and precipitation.     

水槽试验浪成沙纹的特征及控制因素

在水槽中利用周期（１．０～１．９ｓ）、波高（８．６～１１．７ｃｍ）不同的规则波及波群塑造了沙纹。试验指出；１、沙纹的垂向形态指数及对称性指数符合标准浪成沙纹的相应值；２、沙纹的波长、波高、陡度与波浪水质点近底床水平运动方向的轨迹直径、波浪流的无量纲切应力、沉积物的活动性参数呈函数关系；３、沙纹的对称性与波浪的底部质量输移速率和水质点近底床的水平方向运动速率的比值有关。