甘新蒙北山地区成矿带划分和基本特征对比

在对甘新蒙北山地区成矿地质背景和成矿在时空上的联系性等综合研究分析基础上,运用新理论、新认识,以板块构造单元划分为基础,将本区划分为3个Ⅲ级成矿带、11个Ⅳ级成矿带,并对Ⅲ级成矿带特征进行了阐述,以期为矿产勘查和地质大调查工作部署提供新的思路和依据。进一步就主要矿床(点)、构造单元、矿种、赋矿建造、控矿因素、成矿类型、成矿时代等方面进行了对比,认为各Ⅳ级成矿带在区域上具有相对稳定的展布范围,具有相同的构造环境和成矿条件、类似的矿种和成矿时代,存在一定的相似性、可比性,并且各成矿带具有一定的潜在找矿价值。     

流褶层及韧变带研究

流褶层与韧变带是地壳拉伸变形，顺层固态流变作用下的产物。流褶层是以原始层理为变形面或再经递进变形的褶皱变形岩层或岩石共生组合层位。韧变带具明显的层控性，受岩石成分和应变程度控制，不同环境和不同成分岩石的韧变带具有相异的组合型式和变形机制，井具有一定的递变规律。流褶层和韧变带可分属不同层位，但流褶层可实现向韧变带的转化。     

太阳表面米粒结构观测对比度分析

分析以观测系统焦面上和探测器测到的太阳表面米粒结构的对比度与观测系统口径，大气湍流相干长度以及系统探测灵敏度的关系，给出了不同口径，不同大气湍流相干长度以及不同系统探测灵敏度时的米粒结构对比值计算结果，此外还给出了实验结果。     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。     

Strain localization due to structural in-homogeneities in the Central European Basin System

The large-scale crustal deformations observed in the Central European Basin System (CEBS) are the result of the interplay between several controlling factors, among which lateral rheological heterogeneities play a key role. We present a finite-element integral thin sheet model of stress and strain distribution within the CEBS. Unlike many previous models, this study is based on thermo-mechanical data to quantify the impact of lateral contrasts on the tectonic deformation. Elasto-plastic material behaviour is used for both the mantle and the crust, and the effects of the sedimentary fill are also investigated. The consistency of model results is ensured through comparisons with observed data. The results resemble the present-day dynamics and kinematics when: (1) a weak granite-like lower crust below the Elbe Fault System is modelled in contrast to a stronger lower crust in the area extending north of the Elbe Line throughout the Baltic region; and (2) a transition domain in the upper mantle is considered between the shallow mantle of the Variscan domain and the deep mantle beneath the East European Craton (EEC), extending from the Elbe Line in the south till the Tornquist Zone. The strain localizations observed along these structural contrasts strongly enhance the dominant role played by large structural domains in stiffening the propagation of tectonic deformation and in controlling the basin formation and the evolution in the CEBS.     

Thermal and rheological structures of the Xisha Trough, South China Sea

The Xisha Trough, located in the northwest of the South China Sea (SCS) mainly rifted 30 Ma ago, has been a failed rift since the cessation of the seafloor spreading of the NW subbasin. Based on the velocity–depth model along Profile OBH-4 across the Xisha Trough, a seven-layer density–depth model is used to estimate density structure for the profile. The relationship between seismic velocity and radiogenic heat production is used to estimate the vertical distribution of heat sources in the lower crust. The 2-D temperature field is calculated by applying a 2-D numerical solution of the heat conduction equation and the thermal lithosphere thickness is obtained from the basalt dry solidus (BDS). The rheology of the profile is estimated on the basis of frictional failure in the brittle regime and power-law steady-state creep in the ductile regime. Rheological model is constructed for a three-layer model involving a granitic upper crust, a quartz diorite lower crust and an olivine upper mantle. Gravity modeling supports basically the velocity–depth model. The Moho along Profile OBH-4 is of relatively high heat flow ranging from 46 to 60 mW/m² and the Moho heat flow is higher in the trough than on the flanks. The depth of the “thermal” lithospheric lower boundary is about 54 km in the center, deepens toward two sides, and is about 75 km at the northern slope area and about 70 km at the southern Xisha–Zhongsha Block. Rheological calculation indicates that the two thinnest ductile layers in the crust and the thickest brittle layer in the uppermost mantle lie in the central region, showing that the Xisha Trough has been rheologically strengthened, which are mainly due to later thermal relaxation. In addition, the strengthening in rheology during rifting was not the main factor in hampering the breakup of the Xisha Trough.     

岩石圈流变机制的确定及影响岩石圈流变强度的因素

讨论了确定岩石圈流变强度中存在的问题，根据Byerlee定律，给出了在Anderson断层系统下三种断层的摩擦滑动强度公式，利用小标本实验结果外推，用大标本实验结果作约束，得到岩石圈几种典型岩石的脆性破裂规律，利用上述结果和传统的方法，分别得到了鄂尔多斯和山西裂谷两个典型地区的流变强度随深度的变化。结果表明，以往的计算对岩石圈流变强度的估计过高，对脆性形变区估计不足，流变机制估计不对；岩石圈有力学分层的特性，但各地分层的深度范围不同，使得成层和力学作用变得复杂，讨论了水、应变率以及多相矿物对流变强度的影响。     

多矿物岩石流变规律的研究进展及存在问题

总结了近年来由多种矿物组成的岩石的流变规律的研究，阐述了多矿物岩石流变性质研究的意义和进展，再从实验和理论两个方面，详细论述了目前最具代表性的三种理论模型，算术平均方法、几何平均方法和能量极小方法，最后，指出这方面研究仍然存在的问题和进一步研究的方向。     

Contrast in Fluid M etallogeny between the Tianmashan Au-S Deposit and the Datuanshan Cu Deposit in Tongling, Anhui Province

A comprehensive contrast of ore-forming geological background and ore-forming fluid features, especially fluid ore-forming processes, has been performed between the Tianmashan and the Datuanshan ore deposits in Tongling, Anhui Province. The major reasons for the formation of the stratabound skarn Au-S ore deposit in Tianmashan and the stratabound skarn Cu ore deposit in Datuanshan are analyzed in accordance with this contrast. The magmatic pluton in Tianmashan is rich in Au and poor in Cu, but that in Datuanshan is rich in Cu and Au. The wallrock strata in Tianmashan contain Au-bearing pyrite layers with some organic substance but those in Datuanshan contain no such layers. Moreover, the ore-forming fluids in Tianmashan are dominantly magmatic ones at the oxide and sulfide stages, but those with high content of Cu in Datuanshan are mainly groundwater fluids. In addition, differences in compositional evolution and physicochemical condition variation of the ore-forming fluids result in gradual dispersion     

陕西省2002年气候影响评价

通过对自动观测站与人工观测站各气象要素资料的对比分析，找出自动站观测资料与人工观测资料之间的差异，为自动站沿续观测资料的使用提供依据。