CARBON DYNAMICS OF WETLAND IN THE SANJIANG PLAIN

1INTRODUCTIONWetlandsplayanimportant roleintheprocessofcar-bonstorage.Thetotalcarbonstoredindifferentkindsofwetlandsisabout15%-35%ofthetotalcarboninthegloballandsoils(POSTetal.,1982;GORHAM,1991).Inaddition,wetlandsaresignificantnaturalsources fortheatmospheric CH4 (MOORE,1994).It isestimatedthatabout110×1012gCH4 originates fromanaerobicdecompositioninthenaturalwetlands,CH4 emission fromthenaturalwetlandsis15%-30%oftheglobalCH4 emission andtheCH4 emission from thepeat land at hi…     

海上浮动软管的三维静态分析

提出了海上浮动软管的三维静态分析模型。在四级海情下，对输送柴油的软管求得了解析解，得出了软管在侧向和垂直方向的偏移及其所受的拉力，认为此时的软管是不安全的。     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

双船中层拖网网位控制的静力学解析

中层拖网是开发利用中上层鱼类资源的重要工具之一,能否有效实施对拖网作业水层的控制,是实现瞄准捕捞和提高捕捞生产效率的关键。本文提出了1种基于有限元原理的拖网曳纲形状与张力的理论计算方法,以期依据中层拖网拖曳过程中不同拖速、曳纲长度和重锤配备条件下曳纲响应的计算机模拟结果,预测拖网可能的作业水层,以实现中层拖网网位控制,为中层拖网曳纲设计和网位调整提供理论依据。     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

一种时空数据静态可视化表达方法

本文简要介绍了时空数据可视化的必要性,以及目前人们采用的时空数据可视化方法,并分析了这些方法的局限性,提出了一种将年轮(annual ring)作为时空载体,结合视觉变量对面状地物的属性数据进行静态可视化的方法。该方法将面状地物的同心环按照类似树木年轮的生长特征进行划分,作为空间和时间的载体,不同时期属性数据映射到相应的同心环中,同心环的厚度和色彩的差异揭示了属性数据的变化。最后以武汉市城市管理网格化平台的统计评价数据为例实现了对比率量表数据的时态可视化表达。本文所提出的静态时空可视化方法将面状地物的空间、属性和时间紧密地结合在一起,克服了以往静态可视化方法中时间-空间、时间-属性相分离的不足,试验证明了这种方法在实践中的可行性。     

抗滑桩设计推力计算方法研究

滑坡推力是抗滑桩设计推力的重要依据,工程中通常使用剩余推力法来计算滑坡推力。为了比较准确合理地计算出抗滑桩的设计推力,提出了在剩余推力法基础上的一种新的抗滑桩设计推力取值方法。分析极限平衡状态下和工程安全要求下各条块的剩余下滑力,选择合理的桩位,使得抗滑桩位于滑坡体的抗滑段;然后调整桩后滑体的剩余下滑力,其调整量一方面保证桩前桩后滑体满足工程安全要求,另一方面则作为抗滑桩设计推力的修正依据,其过程由程序实现。通过实例证明了该方法的合理性。同时对今后抗滑桩设计推力的合理取值提供了参考作用。     

武汉市区域似大地水准面精化成果应用分析

介绍了武汉市区域似大地水准面精化成果的应用分析、评价以及应用GPS静态和以WHCORS系统的网络RTK的两种作业方法,对两种方法所得成果进行了精度分析,并论述了两种方法的适用范围。     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!