On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.     

Seismic lamination and anisotropy of the Lower Continental Crust

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.     

圆形标志中心子像素定位方法的研究与实现

采用回光反射材料制作圆形回光反射标志，经摄影后得到标志的“准二值影像”；对标志的椭圆影像进行亚像素边缘提取，经最小二乘椭圆拟合后得到标志中心的子像素级位置。试验表明，可以达到0．02像素的定位精度。     

桩基检测中反射波法频域曲线的分析与研究

根据波动理论探讨了反射波在砼榫中的传播原理及频率特性，分析了频域曲线判读中的一 影响因素，并结合工程实例讨论了频域分析法的应用及存在的问题。     

南极冰貌卫星影像条带噪声的剔除

本文在简要叙述条带噪声形成原因的基础上 ,针对南极地区的ASTER 1A的可见光影像中出现的条带噪声的现象 ,通过设计了基于切比雪夫窗、凯瑟窗的FIR滤波器和约束最小二乘FIR滤波器对其条带噪声进行剔除 ,这两种滤波器能够尽可能地剔除条带 ,同时使影像的灰度分布发生最小畸变。并通过与其他方法 (例如 :低通滤波 ,直方图匹配等 )比较 ,说明这两种滤波的方法优于其他的方法     

Vast amount of accommodation space controlled evolution of a continuous Pliocene–Pleistocene mixed cool-water carbonate-siliciclastic prograding wedge in the Bay of Oran (Western Mediterranean)

The Bay of Oran is part of the northern Algerian continental margin, located in the Western Mediterranean Sea between Europe and northern Africa. A regional terrace in ca. 320 m water depth described in earlier studies and a second deeper located one (∼1200 m water depth) provide an unusually vast amount of accommodation space for an observed prograding wedge. Seismo-stratigraphic interpretation of high-resolution reflection seismic data show different phases of mixed cool-water carbonate-siliciclastic deposition: (Ia) Initial aggradation with low dipping foreset deposition during early-Pliocene relative sea-level highstand. (Ib) Deposition transitions to progradation when aggradation reaches the base level. (IIa) Once progradation reaches the shelf break, terrace deposition is reduced to coarse fraction foreset deposits until it ceases entirely. (IIb) Finer sediments are bypassed and start to aggrade on the lower slope terrace until deposits reach the shelf terrace depth. (III) Due to accommodation space prolongation progradation recommences. Phase IIa and phase III deposits are separated by a hiatus. A drop in mean sea-level during the mid-Pleistocene will have caused the base level to fall below the upper strata, hence causing some reworking and redeposition. However, sea-level variations are not considered to be a main controlling factor of the depositional sequences. The evolution of this continuous Pliocene–Pleistocene mixed cool-water carbonate-siliciclastic prograding wedge is instead attributed to the controlling factor of this unusually vast amount of accommodation space. In closest proximity to the sea-floor, sparse recent sedimentation in form of 5–10 m thick sediment lobes can be observed in subbottom profiler data only. From a tectonic point of view, a prolongation of the Yusuf Fault into the survey area though expected by other authors could not be supported with the available dataset.     

Hydrodynamic performance of a dual cylindrical caisson breakwater

The hydrodynamic performance of a dual cylindrical caisson breakwater (DCBW) formed by a row of caissons each of which consisting of a porous outer cylinder circumscribing an impermeable inner cylinder has been theoretically investigated. The theoretical formulation is based on the eigenfunction expansion method proposed by Spring and Monkmeyer (1974) which was further modified by Linton and Evans [Linton, C.M., Evans, D.V., 1990. The interaction of waves with arrays of vertical circular cylinders. Journal of Fluid Mechanics 215, 549–569] for an array of impermeable cylinders. The present formulation is an extension of the work of Wang and Ren [Wang, K.H., Ren, X., 1994. Wave interaction with a concentric porous cylinder system. Ocean Engineering 21(4), 343–360], wherein; the interaction of linear waves with a single concentric porous cylinder system was studied. In the present study, the formulation has been extended to the case of a group of porous dual cylinder system. Parametric studies are carried out to study the influence of porosity (G₀) on the outer caisson, width of the doughnut chamber (a/b) and the angle of wave incidence on the variation in the hydrodynamic loading, wave run-up, free-surface elevation in its vicinity as well as the transmission on its lee-side. The importance of the presence of the inner cylinder in achieving the required hydrodynamic performance in terms of either protection or providing tranquility on its lee side keeping higher stability for the breakwater system is highlighted.     

图像灰度匹配算法研究

图像配准是图像处理的基本任务之一,其效果将直接影响到其后续图像处理工作的效果。介绍了一种借助转动惯量计算惯量椭圆以进行遥感灰度图像配准的方法。