GPS接收机专用芯片组技术发展

在总结国外现有的完整GPS接收机专用芯片组最新情况的基础上，结合典型的芯片产品，阐述了GPS接收机专用芯片组从分立式器件到片上系统、再到单片式接收机的技术发展过程、现状和趋势。     

2～18 GHz超宽带低噪声放大器芯片研制

低噪声放大器在射电天文望远镜接收机中是一个重要的前端组件,其性能对接收机的灵敏度和噪声有至关重要的影响。采用OMMIC公司70 nm GaAs mHEMT工艺研究和设计了一款工作频率为2~18 GHz的超宽带单片微波集成低噪声放大器芯片,芯片面积为2 mm×1 mm。放大器电路采用三级级联放大、双电源供电拓扑结构,常温在片测试结果显示,全频带增益大于28 dB,噪声温度平均值为93 K,直流功耗150 mW,无条件稳定。该放大器芯片覆盖了射电天文S,C,X,Ku 4个传统观测波段,适用于厘米波段超宽带接收前端和毫米波段超宽带中频放大模块。     

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1--9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

RAP－10型桩基检测仪放大器频率补偿

本文叙述了ＲＡＰ－１０仪中一种新型的差动放大器。进行了理论分析、模拟计算和实验。结果表明：这种新型的差动放大电路与通用的差动放大电路相比，具有宽带频率补偿作用。是一种宽带差动放大器。关键词     

基于iBeacon的精细室内定位方法研究

苹果公司发布的i Beacon作为一种粗精度位置感知服务体系,得到了广泛关注。针对更精细的广域位置服务,提出了基于i Beacon的无线指纹定位方法,并给出了图书馆的位置服务示例。     

手持式激光测距仪前级接收通道的相关问题研究

介绍了手持式激光测距仪前置放大电路的设计方法,并且针对便携式设备供电的特殊性,给出了单电源供电放大电路的解决方案,较好地解决了前级接收通道电路设计的相关问题.     

基于数值预报和随机森林算法的强对流天气分类预报技术

随机森林算法是当前得到较为广泛应用的机器学习方法之一,有着很高的预测精度,训练结果稳定,泛化能力强,解决多分类问题有明显优势。本文将随机森林算法应用于强对流的潜势预测和分类,分短时强降水、雷暴大风、冰雹和无强对流四种类别,基于2005—2016年NCEP 1°×1°再分析资料计算的对流指数和物理量,开展强对流天气的分类训练、0～12 h预报和检验,经2015—2016年独立测试样本检验表明,针对强对流发生站点的点对点检验,整体误判率为21. 9%,85次强对流过程基本无漏报,模型尤其适用于较大范围强对流天气。随机森林算法筛选的因子物理意义较为明确,和主观预报经验基本相符,模型准确率高,可用于日常业务。     

CINRAD/SA(B)发射机触发器芯片级故障诊断流程

发射机触发放大器主要为调制器中SCR开关管提供放电触发脉冲,同时兼具调制组件的保护功能。发射机触发器芯片级故障诊断流程将触发器故障定位到芯片级,大大降低了触发器故障维修成本,同时为雷达测试平台中触发器故障自动诊断建模提供了技术支持。在发射机触发器信号流程基础上,依据发射机触发器关键点波形或关键点电平,通过触发器故障树图了解故障因果关系,研究出规范化的触发器芯片级故障诊断流程。列举了依据触发器芯片级故障诊断流程,修复了由于单稳态触发器无触发信号输出,导致无-200V放电触发信号的单稳态触发器故障个例。结果表明:芯片级触发器故障诊断流程可以快速定位发射机触发器故障点到最小可更换芯片。具有操作方法简洁、诊断思路清晰、操作规范,基层雷达站技术人员容易掌握的特点,可有效提高新一代天气雷达技术保障水平,保证雷达观测数据的可靠性。