沂水崔家峪玻璃用石英砂岩矿地质特征

沂水崔家峪玻璃用石英砂岩矿床赋存于早寒武世李官组砂岩段中．呈近水平的层状产出。因其岩石坚硬．矿体呈环山的平台状分布。矿体厚度大，矿石品级高，特级品矿石二氧化硅平均含量98．47％，铁杂质平均含量0．043％(选矿后，铁杂质含量可降至0．02％以下)，为一优质玻璃硅质原料矿床。矿石为细一中粒石英砂岩，粒度以中粒为主，矿石由碎屑颗粒和胶结物组成，碎屑成分含量为97％～98％．其中绝大部分是石英颗粒．具典型的砂屑结掏。该矿床属滨海陆源沉积矿床。     

Fluid Inclusion Feature of Gold-Bearing Quartz Veins from the Jinniushan Gold Deposit, Shandong, China

The auriferous veins at Jinniushan occurs within the Jinniushan faulted zone in the Kunyushan Granite. Optical observation reveals that gold ore body formed during the main stage of hydrothermal activity. Detailed geothermometric studies of fluid inclusions from the veins show that the forming temperature ranges between 130℃ and 370℃ and the salinity is from 4.01 to 15.21 wvt percent NaCl. The ore-forming fluid is featured by low to moderate salinity, and low to moderate temperature. According to investigations of the values of vapor/liquid and temperatures of the ore-forming fluids, we propose that the boiling fluid inclusions exist in the main mineralization stages. Fluid boiling is suggested as a mechanism for the precipitation of gold from the hydrothermal fluid in the Jinniushan gold deposit.     

天文光干涉与综合孔径技术的发展

本文简单介绍了光干涉与综合孔径技术发展的历史、国际上用于天文观测的一些著名光干涉仪的技术特点和进展、以及近年来我国开展的与光干涉 ,综合孔径技术有关的工作 ,最后简要介绍了在光学综合孔径技术领域所发展的光纤与集成光学等新技术     

Glaciomarine sedimentation and palaeo-glacial setting of Maxwell Bay and its tributary embayment, Marian Cove, South Shetland Islands, West Antarctica

High-resolution (3.5 kHz and multi-channel) seismic profiles and piston cores were collected from Maxwell Bay and its tributary embayment, Marian Cove, in the South Shetland Islands, Antarctica, during the Korea Antarctic Research Program (1992/93 and 1995/96) to elucidate the glaciomarine sedimentation processes and recent glacial history of the area. Seismic data from Maxwell Bay reveal a rugged bay margin and flattened basin floor covered with well-stratified hemipelagic muds. On the base-of-slope, acoustically transparent debris flows occur, indicating downslope resedimentation of glaciomarine sediments. Despite the subpolar and ice-proximal settings of Marian Cove, the seafloor is highly rugged with a thin sediment drape, suggesting that much of the area has been recently eroded by glaciers. Sediment cores from the cove penetrated three distinct fining-upward lithofacies: (1) basal till in the lower part of the core, accumulated just seaward of the grounding line of the tidewater glacier; (2) interlaminated sand and mud in the middle part, deposited in ice-proximal zone by a combination of episodic subglacial meltwater inflow and iceberg dumping; and (3) pebbly mud in the upper part, deposited in ice-distal zone by both surface meltwater plume and ice-rafting from the glacier front. A reconstruction of the glacial history of these areas since the late glacial maximum shows an ice sheet filling Maxwell Bay in late Wisconsin time and grounding of the tidewater glacier in Marian Cove until about 1300 yr BP.     

A seismic reconnaissance survey of the northern Congo Fan

To study the time-varying influence of the Congo River and the Benguela Current on the deposition at the Angola Continental Margin, a high-resolution reflection seismic survey was carried out on the northern Congo Fan. Four seismostratigraphic units have been defined for the upper 800 m (1000 ms TWT) of the data. The units record different depositional environments, ranging from pre-establishment of the Congo River drainage system to the influence of the Benguela Current. An indication of a general change in the turbidite system is provided by a shift in channel distribution and a relocation of the depocentre of coarse material. The ascent of salt is recorded up to the Pliocene. Gas that has migrated out of Lower Cretaceous shales and that was produced from large quantities of organic matter in the younger sediments can be found on the flanks and on top of the salt domes. In a few places, this gas even ascends to the ocean floor along structural pathways through the topmost unit.     

Evidence for the evolution of an oxygen minimum layer at the beginning of S-1 sapropel deposition in the eastern Mediterranean

The sediments of the eastern Mediterranean basin contain a series of organic-rich sapropels intercalated with organic-poor nannofossil oozes. Until recently the timing of the onset of sapropel formation was not known accurately because of the low resolution achievable by conventional radiocarbon dating. Compilation of all available ¹⁴C-AMS dates show that the base of S-1 (the most recent sapropel) was initiated 8800 years B.P. (¹⁴C age corrected by 400 years for reservoir effect) under a 500 m water column and moved progressively into deeper water reaching depths of 3500 m at 8200 years B.P. The linear correlation between the age of S-1 onset and water depth

Full-size image

suggests that formation of sapropels moved into deeper water at a rate of 1000 m/200 year. A model is suggested in which export production which sank below the well-mixed surface layers (500 m) was respired consuming dissolved oxygen in the Levantine deep water until a threshold value was reached when sapropels began to be preserved in the sediment. This resulted in a progressively deepening oxygen minimum zone with time until eventually the entire deep water in the basin was oxygen depleted. Assuming that the threshold value for sapropel formation was complete anoxia, it was calculated that primary productivity in the basin during the deposition of S-1 was a factor of 5 greater than that found at present.     

Accelerated relative sea-level rise and rapid coastal erosion:: testing a causal relationship for the Louisiana barrier islands

The role of relative sea-level rise as a cause for the rapid erosion of Louisiana's barrier island coast is investigated through a numerical implementation of a modified Bruun rule that accounts for the low percentage of sand-sized sediment in the eroding Louisiana shoreface. Shore-normal profiles from 150 km of coastline west of the Mississippi delta are derived from bathymetric surveys conducted during the 1880s, 1930s and 1980s. An RMS difference criterion is employed to test whether an equilibrium profile form is maintained between survey years. Only about half the studied profiles meet the equilibrium criterion; this represents a significant limitation on the potential applicability of the Bruun rule. The profiles meeting the equilibrium criterion, along with measured rates of relative sea-level rise, are used to hindcast shoreline retreat rates at 37 locations within the study area. Modeled and observed shoreline retreat rates show no significant correlation. Thus, in terms of the Bruun approach, relative sea-level rise has no power for hindcasting (and presumably forecasting) rates of coastal erosion for the Louisiana barrier islands.     

Quartz deformation mechanisms during Barrovian metamorphism: Implications from crystallographic orientation of different generations of quartz in pelites

The behaviour of quartz during metamorphism is studied based on two case studies from the Barrovian terrains of Sulitjelma in arctic Scandinavia and Loch Tay in the Central Highlands Dalradian of Scotland. Both terrains preserve evidence for metamorphism in pelites involving nucleation and growth of garnet at different times in the deformation history. Data are presented on the size, shape and crystallographic orientation of quartz preserved as inclusions in garnet and as grains in the surrounding matrix. While quartz-grains remain small and dispersed between mica grains, deformation appears to be dominated by grain-boundary sliding accommodated by dissolution–precipitation. At amphibolite facies, textural coarsening occurs by dissolution of small quartz grains and growth of larger quartz grains, coupled with segregation of quartz from mica. As a result, quartz deforms by dislocation creep, developing crystallographic preferred orientations (CPO) consistent with both coaxial and non-coaxial strain. Quartz CPOs with <0001> axes lying parallel to foliation and stretching direction are commonly developed, and best explained by mechanical rotation of inequant (detrital?) quartz grains. There is no evidence for selective entrapment of quartz inclusions in garnet on the basis of quartz crystallographic orientation.     

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.