Immediate profile and planform evolution of a beach nourishment project with hurricane influences

In this study, planform adjustment began during a period of calm weather immediately after nourishment and then the passage of one strong storm caused a substantial portion of the total profile equilibration. Weekly beach profiles, shoreline surveys, and nearshore wave measurements were conducted before, during, and immediately after construction of the 1100-m long Upham Beach nourishment project on the low-energy, west coast of Florida. This project was constructed in three segments: the wide north segment, the central segment, and the narrow south segment. With the exception of the relatively distant passage of Hurricane Charley, calm weather prevailed for 45 days following completion of the south and central segments. Construction of the wide north segment was completed on August 27, 2004. Substantial planform diffusion occurred prior to construction completion via formation of a 300-m long spit extending from the wide north segment. The shoreline orientation was changed abruptly due to this diffusion spit formation, as opposed to the gradual adjustment predicted by most long-term models. Planform adjustment was initiated prior to profile equilibration, and it did not require high-energy conditions. A simple vector sum model for determining the orientation of a potential diffusion spit was developed. This study recommends designing end transitions at the predicted diffusion spit orientation to avoid post-nourishment spit formation during future projects.     

声纳记录失真分析

从侧扫声纳的工作原理出发，分析了侧扫声纳记录声图产生基本失真的原因，推导出基本失真的数学公式，所得结论对实际作用有重要的指导意义。     

抚顺发电厂变形规律浅析

抚顺发电厂是一座坑口发电厂,受采煤等多种复杂人为及地质因素的影响,厂区发生一系列的变形和破坏.本文基于观测成果对厂区变形规律进行了分析.     

二维地震观测系统合理性的论证方法

已知勘查区深度范围前提下,最大炮检X和道间距ΔX,不可以太大也不可以太小,施工前能够计算出它的允许值范围。     

基于车载序列影像的建筑立面纹理的快速重建

提出了一种基于车载序列影像的建筑立面纹理快速重建的方法。首先进行影像预处理,包括畸变差改正、树木遮挡去除等,然后对影像进行自动纠正,在此基础上,自动选择拼接点对影像进行拼接。实验证明了本文方法的有效性。     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

克孜尔水库大坝的面波检测

1999年 3月 15日克孜尔地震之后对克孜尔水库坝体出现的裂缝进行了面波勘探。首先介绍了面波勘探法的基本原理 ,然后通过典型剖面检测与资料处理找出异常区、带并进行解释。试验表明面波勘探法适用于克孜尔水库大坝监测     

Neuzeitlicher Schadstofftrend: Polycylische aromatische Kohlenwasserstoffe (PAK) in aquatischen und terrestrischen Sedimenten

A Recent Contamination Trend: Polycylic Aromatic Hydrocarbons (PAHs) in Aquatic and Terrestrial Sediments Concentrations of polycylic aromatic hydrocarbons (PAHs) measured in aquatic sediments of small, medium‐sized or very large inland lakes, of estuaries as well as in terrestrial sediments from Germany, the UK, Finland, and the USA were plotted in 10 trend curves over the period from 1800 to 1990. The segments of the bore cores were dated for their deposition age. For comparability of the results, the trend is preferentially shown by the guide parameter fluoranthene. Until the 19th century, a constant background value of C_Fluo = 10…50 μg/kg was observed in all regions. Then a steep increase in concentration followed, reaching in the aquatic sediments a maximum in the period 1940 to 1965, while the individual fluoranthene values ranged widely from 90 to 2400 μg/kg. In several regions, a more or less distinct decrease superseded this maximum, although this development did not appear in terrestrial sediments, in one estuary, and in remote forest lakes in Finland. The trend curves reflect the atmospheric deposition of PAHs in airborne dust and in some cases the import through runoff via rivers. Thus, the sediment profiles depict the development of air pollution by pyrogenic contaminants over more than a century. Sediment profiles from rivers can be used only with a high degree of reservation, because of the irregularity and low representativity of the sedimentation.     

频散效应对近地面层风速廓线的影响

应用含湍流频散效应的近地面层的运动方程求解了不同层结下的风速廓线，着重分析了湍流频散效应对近地面层平稳运动的影响。分析指出：湍流的频散效应对经典的幂律廓线一对数修正，该修正在不稳定层结时比稳定层时明显；利用相似理论也得到了该常数。