噪声信号源超磁致伸缩换能器设计方法研究

针对以往噪声信号发射换能器在实际工作中,存在着诸多影响正常科研试验的问题,并根据噪声信号的技术要求,以及探测方式的技术特征,我们对噪声发射换能器进行了重新设计,从选用超磁致伸缩材料作为换能器的材料入手,结合国内外一些新的设计理念,从材料性能分析,到理论设计,最后到可靠性实施方法,都进行了周密细致的研究,并完成了设计全过程。测试结果和使用性能表明,达到了预期的目的,这也是该材料在国内首次应用于单只宽频水声换能器中,开创了稀土超磁致伸缩材料应用的又一个先列。     

Pressure prediction in the Bullwinkle Basin through petrophysics and flow modeling (Green Canyon 65, Gulf of Mexico)

Reservoir pressures within the Bullwinkle minibasin (Green Canyon 65, Gulf of Mexico continental slope) increase at a hydrostatic gradient whereas pressures predicted from porosity within mudstones bounding these reservoirs increase at a lithostatic gradient: they are equal at a depth 1/3 of the way down from the crest of the structure. Two- and three-dimensional steady-state flow models demonstrate that bowl-shaped structures will have lower pressures than equivalent two-dimensional structures and that if a low permeability salt layer underlies the basin, the pressure is reduced. We conclude that at Bullwinkle, pressure is reduced due to an underlying salt body and the bowl-shape of the basin. A geometric approach to predict sandstone pressure is to assume that the reservoir pressure equals the area-weighted average of the mudstone pressure. When the mudstone pressure gradient is constant, as at Bullwinkle, the reservoir pressure equals the mudstone pressure at the average depth (centroid) of the reservoir.     

A conceptual design of an underwater vehicle

The paper presents a conceptual design of an underwater star wars’ system, which will be more difficult to detect by the enemy than a recently proposed ‘surface’ star wars’ system.The paper suggests that for the proposed structures needed for the underwater star wars’ system, the material of construction should be a composite and not a metal, as use of the latter for large deep diving underwater vessels will result in such structures sinking to the bottom of the ocean like stones, due to the fact that they will have no reserve buoyancy. The paper also shows that composites have better sound absorption characteristics, thereby making the underwater structures difficult to detect through sonar equipment. It is proposed that these underwater structures should operate up to a depth of 7.16 miles (11.52 km), as at this depth, all of the oceans’ bottoms can be reached.The author shows that current technology can be used to construct and operate such vessels, but more progress needs to be made with metal matrix and ceramic composites, so that the hulls of underwater missiles and torpedoes can be constructed in these materials.     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

深水资料浮标中温度传感器电路的设计

本文对深水资料浮标中温度传感器的电路原理作了介绍。传感器中的感温元件,采用两端单片集成温度传感器AD590;整个测温电路仅用一片高精度4×1/2位A/D转换器7135;为了能方便地检验和标定温度值,在电路上还设计了温度显示部分,并设计了闭显的功能,以达到省电的目的。     

西太平洋暖池区气象学特征分析

本文根据ＴＯＧＡ－ＣＯＡＲＥ强化观测资料及卫星资料分析讨论了西太平洋暖池区１１－２月间海面气象要素的平均特征。分析发现海面气压平均日变化似乎同中纬度区明显不同。文中还分析讨论了在西太暖池区西风爆发、赤道浅涡、信风逆温及ＩＴＣＥ和南太平洋辐合带ＳＰＣＺ的变化特征。     

Hydrodynamic forces on partly buried tandem, twin pipelines in current

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.     

Modeling the cyclic swelling pressure of mudrock using artificial neural networks

The stochastic nature of the cyclic swelling behavior of mudrock and its dependence on a large number of interdependent parameters was modeled using Time Delay Neural Networks (TDNNs). This method has facilitated predicting cyclic swelling pressure with an acceptable level of accuracy where developing a general mathematical model is almost impossible. A number of total pressure cells between shotcrete and concrete walls of the powerhouse cavern at Masjed–Soleiman Hydroelectric Powerhouse Project, South of Iran, where mudrock outcrops, confirmed a cyclic swelling pressure on the lining since 1999. In several locations, small cracks are generated which has raised doubts about long term stability of the powerhouse structure. This necessitated a study for predicting future swelling pressure. Considering the complexity of the interdependent parameters in this problem, TDNNs proved to be a powerful tool. The results of this modeling are presented in this paper.     

DB16智能大型岩土工程无损检测仪及其应用

介绍一种智能大型岩土工程无损检测仪及其应用。该仪器以大功率稀土超磁致伸缩换能器作震源，以与计算机并行接口连接的高速数据传输的16通道DB16数据采集系统进行声波采集，以高灵敏度的低频压电陶瓷(PZT)换能器作接收，用声波层析成像(CT)技术进行数据处理，检测结果用彩色等高图表示。该仪器从参数的设置到数据的采集、保存、CT数据的处理、CT成像等全在一专用软件中完成，操作方便快捷。给出了利用本仪器对某大型水库的泄流深孔挑流鼻坎混凝土浇注质量无损检测的应用实例。     

强震前大气层中温压相关特征的异常显示

对中国大陆已发生的多次7级以上强震震中区气温、气压资料进行了研究，结果表明：在大震前（30天之内），气温－气压函数的平衡状态被破坏，其相关系数（代数值）不断增大，“正弓”形可作为短临异常的标志，同时对其成因也进行了初步探讨。