Field Measurement of Suction, Water Content, and Water Permeability

This paper presents a review of techniques for field measurement of suction, water content, and water hydraulic conductivity (permeability). Main problems in the use of field tensiometers are addressed and hints on how to improve tensiometer performance are given. Advantages and limitations of instruments for indirect measurement of suction including electrical conductivity sensors, thermal conductivity sensors, dielectric permittivity sensors, filter paper, and psychrometer are discussed. Techniques for water content measurement based on dielectric methods are then presented. These include time and amplitude domain reflectometry and capacitance. Finally, a brief overview of methods for measurement of water permeability in the field is presented.     

Wave runup on a concentric twin perforated circular cylinder

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

Harmonic generation past a submerged porous step

Experiments were conducted in a wave flume to study the differences between harmonic evolution of monochromatic waves as they propagate over a submerged impermeable or porous step under non-breaking conditions. Results are used as a preliminary analysis to establish some engineering design criteria on harmonic generation on submerged porous structures. The root-mean-squared wave height evolution is also studied and compared to linear models as a first approximation. It is shown that porous structure increases the effective relative depth and decreases the relative wave height, resulting in a lower Ursell number and a lower chance to generate harmonics. The effective water depth over a step as defined in the paper, provides information to evaluate the potential harmonic generation.     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

对波达波夫和Pride震电波方程组的对比分析

用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述.     

塔里木西南早第三纪古地磁和地壳缩短

属于帕米尔弧山前带的乌帕尔剖面和属于南天山山前带的巴对布拉克剖面，现今的纬度差为０．５６°，但是下第三系古地磁测定结果表明其古纬度差很大．乌帕尔剖面齐姆根组上部的古纬度为８°Ｎ，而巴什布拉克剖面巴什布拉克组第５段的古纬度为３６．１°Ｎ。若考虑到当时板块的相对运移速度，估计始新世早期巴什布拉克地区的古纬度大致为３１°Ｎ，与当时乌帕尔所处位置的纬差达２３°。又根据Ｋｌｏｏｔｗｉｊｋ测得的帕米尔西北缘利什坦层的古纬度值，在始新世末期．包括乌帕尔在内的帕米尔前缘与以巴什布拉区为代表的南天山山前带之间还有至少１０°的纬度差。古地磁资料表明，始新世早期，塔里木海宽达２０００ｋｍ，此时印度板块西北端已与欧亚板块局部碰撞，至始新世末，印度板块向北推进２０°，帕米尔弧前缘与南天山山前的距离缩短到约１０００ｋｍ，原塔里木海的两侧上升为山前平原。     

Détermination expérimentale des paramètres équivalents d'un milieu poreux hétérogène en écoulements uniforme ou radial

Tracer tests are carried out in a heterogeneous porous medium that has a 3D correlated random distribution of the permeabilities. The fitting of numerical models provides the values of equivalent permeability and macrodispersivity characterizing a 2D homogeneous horizontal medium. Different flow configurations are studied: uniform, radial and pump and treat (doublet). The fitted parameter sets are independent of the flow type, except for the doublet. They are greater than the values predicted by stochastic theories, due to the small number of correlation lengths explored by the tracer and the limited extension of the experimental set-up. To cite this article: C. Danquigny, P. Ackerer, C. R. Geoscience 337 (2005).     

印度-澳大利亚板块应力场数值模拟及其动力学分析

印度-澳大利亚板块的边界类型和性质十分复杂。本文采用伪三维有限元方法,利用WSM2000观测应力场数据的应力取向和应力状态作为主要约束,建立了印度-澳大利亚板块岩石层三维模型,对印度-澳大利亚板块构造应力场进行了数值模拟,进而探讨印度-澳大利亚板块所受边界力对板块内部应力场的影响。结果显示,印度-澳大利亚板块的构造应力场主要受到两个因素的控制:①软流层静压推力;②来自碰撞带的阻力,包括喜马拉雅、巴布亚新几内亚、新西兰和印度-澳大利亚板块与欧亚板块的西北边界。而来自俯冲消减带的拉张作用力对板内应力场的作用相对较小。