Applications of particle-tracking techniques to bank infiltration: a case study from El Paso,Texas, USA

This paper presents results of a small scale study that utilized particle-tracking techniques to evaluate transport of river water through an alluvial aquifer in a bank infiltration testing site in El Paso, Texas, USA. The particle-tracking survey was used to better define filtration parameters. Several simulations were generated to allow visualization of the effects of well placement and pumping rate on flow paths, travel time, the size of the pumping influence zone, and proportion of river-derived water and groundwater mixing in the pumping well. Simulations indicate that migration of river water into the aquifer is generally slow. Most water does not arrive at the well by the end of an 18-day pumping period at 0.54 m³/min pumping rate for a well located 18 m from the river. Forty-four percent of the water pumped from the well was river water. The models provided important information needed to design appropriate sampling schedules for bank filtration practices and ensured meeting adequate soil-retention times. The pumping rate has more effect on river water travel time than the location of the pumping well from the river. The examples presented in this paper indicate that operating the pumping well at a doubled distance from the river increased the time required for the water to travel to the well, but did not greatly change the capture zone.     

Filtration and Clogging Behavior of Geotextiles with Roorkee Soils

Geotextile filters are rapidly replacing graded granular filters as the standard of practice in geotechnical design. The objective of the present study is to predict the behavior of the geotextile filter for the locally (Roorkee—India) available soils using three different geotextiles (two nonwoven and one woven). Nonwoven geotextiles are commonly used in filtration applications. This paper evaluates the long-term performance of two needle-punched nonwoven geotextiles and one woven geotextile. Filtration tests on soil–geotextile filter systems were conducted in the laboratory in order to evaluate the filtration and clogging behavior. Laboratory test program, include evaluation of performance of two different nonwoven and one woven geotextile filters in combination with locally available Solani River Sand and Clayey Soil. The paper describes the concept and details of the Fine Fraction Filtration (F³) test and presents data on three different geotextiles, which were evaluated using three different soil types. It is deduced that in all filtration applications, the non-woven geotextile would perform better than the woven geotextile.     

一种改进的膜盐度计

叙述了一种可用于现场及实验室使用的新的浸入式电池膜盐度计的设计与结构。该膜盐度计传感器由下列电化学电池组成,用此传感器与微机或pH/离子计配合组成了膜盐度计。该仪器可用于近岸河口地区表层海水盐度监测并用于有潮河口底栖动物生态现场研究。仪器现场条件使用准确度约为盐度测量值1％。同时能用于Cl~-及其他离子的现场监测。     

MTBE in Drinking Water Production – Occurrence and Efficiency of Treatment Technologies

In Germany, the gasoline additive methyl tert‐butyl ether (MTBE) is almost constantly detected in measurable concentrations in surface waters and is not significantly removed during riverbank filtration. The removal of MTBE from water has been the focus of many studies that mostly were performed at high concentration levels and centred in understanding the mechanisms of elimination. In order to assess the performance of conventional and advanced water treatment technologies for MTBE removal in the low concentration range further studies were undertaken. Laboratory experiments included aeration, granulated activated carbon (GAC) adsorption, ozonation and advanced oxidation processes (AOP). The results show that the removal of MTBE by conventional technologies is not easily achieved. MTBE is only removed by aeration at high expense. Ozonation at neutral pH values did not prove to be effective in eliminating MTBE at all. The use of ozone/H₂O₂ (AOP) may lead to a partly elimination of MTBE. However, the ozone/H₂O₂ concentrations required for a complete removal of MTBE from natural waters is much higher than the ozone levels applied nowadays in waterworks. MTBE is only poorly adsorbed on activated carbon, thus GAC filtration is not efficient in eliminating MTBE. A comparison with real‐life data from German waterworks reveals that if MTBE is detected in the raw water it is most often found in the corresponding drinking water as well due to the poor removal efficiency of conventional treatment steps.     

基于Membrane MRF模型的SAR图像贝叶斯去斑

SAR图像可以看作是真实反映地物后向散射特性的无噪图像与相干斑噪声的乘积,通过贝叶斯估计从图像观测值估计出图像真值即可去除相干斑.而贝叶斯去斑的关键在于建立能与SAR图像特性相匹配的先验信息模型.用MembraneMRF模型对先验信息建模,克服了以往所用GMRF模型对参数估计十分敏感的问题,并通过对该模型邻域结构的自适应调整来分类处理处于匀质区域和含结构特征区域的像元,在有效抑制相干斑的同时较好地保持图像的结构特征.仿真和实际SAR图像数据的实验结果,验证了所提方法的有效性.     

Der Leitfähigkeitstest — Ein Testsystem zur Ermittlung der membrantoxischen Eigenschaften von Substanzen

The Conductivity Test — Determining the Membrane-toxic Properties of Substances A new biotest system is introduced which is specific in terms of the measured effect but not in terms of the applied organisms. The system is able to detect the effect of membrane-toxic compounds e.g. detergents, organic solvents, and radical formers. Released into the environment, these substances damage biological membranes and therefore cause ion leakage into a surrounding medium. Ion leakage is taken as a measure for membrane damage and is determined as an increase of the electrical conductivity in the medium (conductivity test). The results presented for the tensides benzalkonium chloride, LAS (linear alkylbenzenesulfonate), and APG (alkylpolyglycoside) demonstrate the capability of the conductivity test to distinguish between the differing toxicological potential of these membrane-toxic substances. In contrast to most of the conventional biotests, the endpoint of the conductivity test is independent of a specific organism. This independence is demonstrated by the results obtained with benzalkonium chloride treatment of Elodea canadensis, Lemna minor, and Salvinia natans. The conductivity test represents a versatile, easy to handle biotest system for the assessment of ecotoxicological effects caused by membrane-toxic substances.     

Continuous inline mapping of a dissolved methane plume at a blowout site in the Central North Sea UK using a membrane inlet mass spectrometer – Water column stratification impedes immediate methane release into the atmosphere

The dissolved methane (CH₄) plume rising from the crater of the blowout well 22/4b in the Central North Sea was mapped during stratified water column conditions. Geochemical surveys were conducted close to the seafloor at 80.3 m water depth, below the thermocline (61.1 m), and in the mixed surface layer (13.2 m) using membrane inlet mass spectrometry (MIMS) in combination with a towed CTD. Seawater was continuously transferred from the respective depth levels of the CTD to the MIMS by using an inline submersible pump. Close to the seafloor a well-defined CH₄ plume extended from the bubble release site ∼460 m towards the southwest. Along this distance CH₄ concentrations decreased from a maximum of 7872 nmol l⁻¹ to less than 250 nmol l⁻¹. Below the thermocline the well-defined CH₄ plume shape encountered at the seafloor was distorted and filaments were observed that extended towards the west and southwest in relation to current direction. Where the core of the bubble plume intersected this depth layer, footprints of high CH₄ concentrations of up to 17,900 nmol l⁻¹ were observed. In the mixed surface layer the CH₄ distribution with a maximum of up to 3654 nmol l⁻¹ was confined to a small patch of ∼60 m in diameter. The determination of the water column CH₄ inventories revealed that CH₄ transfer across the thermocline was strongly impeded as only ∼3% of the total water column inventory was located in the mixed surface layer. Best estimate of the CH₄ seabed release from the blowout was 1751 tons yr⁻¹. The fate of the trapped CH₄ (∼97%) that does not immediately reach the atmosphere remains speculative. In wintertime, when the water column becomes well mixed as well as during storm events newly released CH₄ and the trapped CH₄ pool can be transported rapidly to the sea surface and emitted into the atmosphere.     

用于盐湖提锂的聚酰胺复合纳滤膜制备及其性能研究

纳滤膜技术以其环境友好、装置集成度高和智能化控制等优势,在卤水锂资源绿色开发领域具有良好的应用前景。实验通过添加聚乙烯醇对纳滤膜功能层进行改性,考察了聚乙烯醇相对含量对纳滤膜性能的影响。结果表明,聚乙烯醇参与界面聚合反应,纳滤膜功能层O/N比增加,聚乙烯醇分子链间氢键作用降低纳滤膜表面粗糙度。羟基官能团的引入有效改善纳滤膜材料亲水效果,膜面羧基密度随聚乙烯醇相对添加量的增加逐渐增加。聚乙烯醇改性纳滤膜截留效果优异,纳滤膜对镁离子的截留率高于95%,锂离子截留率低于-44%,不可逆通量衰减指数低于15%。聚乙烯醇改性纳滤膜材料具有较好的镁锂分离选择效果及抗污染能力,为用于盐湖卤水镁锂分离国产化纳滤膜材料的开发提供新思路。     

Application of Greek lignite as an additive for controlling rheological and filtration properties of water–bentonite suspensions at high temperatures: A review

This review paper presents the results of an extensive study investigating whether addition of 3% w/w Greek lignite to 6.42% w/w water–bentonite suspensions, after being exposed to high temperatures, can prevent gelation and control filtration characteristics. Two different bentonites and eight lignites from different Greek basins have been used while a commercial lignite product has been used as standard. The lignite-free bentonite suspensions heated to 177 °C for 16 h (thermal aging) thicken considerably, increasing the yield stress and the yield point. Fluid consistency and flow behavior indices also change while no significant change is observed for plastic viscosity. Thermal aging of the suspensions results in unacceptably high fluid loss values.Addition of Greek lignite to water–bentonite suspensions, followed by thermal aging, provided the rheological stability of the suspensions by maintaining the low yield stress/point regardless of the type of bentonite. Some of the lignites performed as well as their commercial counterpart. No specific trends for rheological improvement have been identified with respect to various characteristics of lignites such as contents of humic, fulvic acids, humins and other parameters such as specific surface area and cation exchange capacity.Furthermore, addition of lignite in most cases provided very good filtration control of the water–bentonite suspensions after exposure to 177 °C, with some Greek lignites being superior to the commercial product. The same lignite parameters examined for rheological control, were also examined to determine their effect on fluid loss of these suspensions for both bentonites. The content of humic and fulvic acids of two groups of lignites showed weak inverse correlations with the fluid loss volumes for both bentonites, while all other parameters did not seem to directly correlate with the effectiveness of the lignites.     

对硫磷对扁藻和杜氏藻膜脂的过氧化与脱酯化伤害

于１９９４－１９９５年,运用急性急性实验及生化方法对扁藻和杜氏藻的对硫磷毒性效应进行研究。结果表明,对硫磷对扁藻生长的抑制作用明显强于杜氏藻,在对硫磷的胁迫下,两种微藻细胞的超氧阴离子自由基相对含量上升,膜透性增大,微粒体膜脂过氧化水平提高。同时,扁藻微粒体膜的磷脂减少,游离脂肪酸含量增加。