Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.     

Morphological analysis of the drainage system in the Eastern Alps

We study the morphology of the major rivers draining the Eastern Alps to test whether the active tectonics of this part of the orogen is reflected in the shape of channel profiles of the river network. In our approach we compare channel profiles measured from digital elevation models with numerically modelled channel profiles using a stream power approach. It is shown that regions of high stream power coincide largely with regions of highest topography and largest uplift rates, while the forelands and the Pannonian Basin are characterised by a significantly lower stream power. From stream power modelling we conclude that there is young uplift at the very east of the Eastern Alps, in the Bohemian Massif and in the Pohorje Range. The impact of the Pleistocene glaciations is explored by comparing properties of rivers that drain in proximal and distal positions relative to the ice sheet during the last glacial maximum. Our analysis shows that most knick points, wind gaps and other non-equilibrium features of catchments covered by ice during the last glaciations (Salzach, Enns) can be correlated with glacial processes. In contrast the ice free catchments of the Mur and Drava are characterized by channels in morphological equilibrium at the first approximation and are showing only weak evidence of the strong tectonic activity within these catchments. Finally, the channel profiles of the Adige and the divide between the upper Rhine and Danube catchments differ significantly from the other catchments. We relate this to the fact that the Adige and the Rhine respond to different base levels from the remainder of the Eastern Alps: The Adige may preserve a record from the Messininan base level change and the Rhine is subject to the base level lowering in the Rhine Graben.     

Geomorphological hazards related to deep dissolution phenomena in the Western Italian Alps: Distribution, assessment and interaction with human activities

Deep dissolution affects great part of soluble rocks (e.g. gypsum and anhydrite) of the Western Italian Alps. The related superficial phenomena (sinkholes, gravity-induced processes and a local worsening of geomechanical rock properties) are not limited to typical karsts landscape and cause slope instability also affecting populated sites and infrastructures. The paper aims to describe general characteristic of dissolution phenomena, to interpret their conditioning factors and evolutionary stages and to assess possible hazards due to their superficial effects.The search for evidences of deep dissolution leads to the selection of representative sites in the central part of the Western Italian Alps (Piemonte and Valle d'Aosta Region). Detailed geological and geomorphological studies have been used to classify the selected sites by type, size and variable state of activity. Very different evolutionary stages of dissolution phenomena have been interpreted by comparison of case-studies: some are early “embryonic”; others are more evolved, up to typical sinkholes, or even remodelled by other phenomena. Some cases show an extreme complexity in the interactions between corrosion phenomena and other geomorphic processes: slope deformations, from one side, and karst, fluvial and glacial phenomena, to the other. A wide range of movement rates on slope instabilities induced by deep dissolution have been estimated by topographic and geomorphic data. Geochemical data on removed rocks by dissolution indicate 0.4 mm/year values for local subsidence. Historical and technical data indicate low frequency of major dissolution-induced collapses, but highlight widespread damages to tunnels, roads and buildings, especially along slopes.     

Contribution of Sponge Spicules to the Composition of Biogenic Silica in the Ligurian Sea

Abstract. The importance of sponge spicules in the turnover of biogenic silica (BSi) in the detritic bottoms of the Eastern Ligurian Riviera was evaluated by studying sediment cores and the detrital matter collected by a trap over a one year period.
This study made evident that: i) Sponge spicules represent the main component of the BSi both in the sediments and in the trapped matter; ii) A correlation exists between the sponge biomass present on the overhanging cliff and the amount of sponge spicules found in the sediment below; iii) Inside the sediments, a superficial layer (10 cm deep) characterized by intensive silica dissolution processes can be observed; and iv) The amount of spicules collected using the trap is not constant throughout the year, but shows a characteristic trend with low values in spring and summer and high values in autumn and winter.     

Polycyclic aromatic hydrocarbons in water, seston and copepods in a harbour area in the Western Mediterranean (Ligurian Sea)

Polycyclic aromatic hydrocarbons (PAHs) are widespread carcinogenic, mutagenic and teratogenic pollutants that can significantly affect ecosystems and exert an influence on marine planktonic and benthic communities as well as on higher organisms such as fish and mammals, including humans. In this paper the concentrations of six PAHs in water, seston and copepods were examined in a harbour zone of the Genova Gulf (Ligurian Sea) from November 1997 to June 1998. The importance of freshwater inputs coming from a polluted stream and the influence of seasonal and atmospheric factors were also considered. Highest PAH values were recorded during spring. Fluoranthene, Benzo[b]fluoranthene and Benzo[k]fluoranthene were the most abundant PAHs either in water, seston or copepods. The concentration of total PAHs in seawater was often lower than the detection limit: recorded values ranged between 0.001 and 0.06 ppb. In seston, total PAHs ranged between 0.033 and 6.26 ng·g^?1 and in copepods between 0.01 and 2.34 ng·g^?1. With this study, PAH contamination in the harbour zone of Genova Sestri‐Ponente and the importance of inputs of organic pollutants coming from land and freshwaters have been emphasized.     

Coupling a two-way nested primitive equation model and a statistical SST predictor of the Ligurian Sea via data assimilation

A primitive equation model and a statistical predictor are coupled by data assimilation in order to combine the strength of both approaches. In this work, the system of two-way nested models centred in the Ligurian Sea and the satellite-based ocean forecasting (SOFT) system predicting the sea surface temperature (SST) are used. The data assimilation scheme is a simplified reduced order Kalman filter based on a constant error space. The assimilation of predicted SST improves the forecast of the hydrodynamic model compared to the forecast obtained by assimilating past SST observations used by the statistical predictor. This study shows that the SST of the SOFT predictor can be used to correct atmospheric heat fluxes. Traditionally this is done by relaxing the model SST towards the climatological SST. Therefore, the assimilation of SOFT SST and climatological SST are also compared.     

Channelized and hillslope sediment transport and the geomorphology of mountain belts

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at     

Out-of-sequence thrusts and paleogeography of the Rhenodanubian Flysch Belt (Eastern Alps) revisited

The Oberstdorf nappe of the Western and the Laab nappe of the Eastern Rhenodanubian Flysch (ERF) were independently identified as out-of-sequence thrust units by facies studies (Mattern 1999) and zircon analyses (Trautwein et al. 2001a, b, c), respectively. A new look at both areas reveals mutual similarities and new evidence for the out-of-sequence concept. Paleocurrent and heavy mineral data make it possible to reconstruct the sediment influx directions. From the Barremian to the mid-Campanian, the western and eastern basin segments were fed with south-derived garnet and north-derived zircon/”ZTR” (i.e., zircon, tourmaline, and rutile). Because both out-of-sequence units are relatively rich in zircon/ZTR they must have occupied the northernmost basin position. In the Western Rhenodanubian Flysch segment, the Sigiswang nappe occupied the central and the Üntschen nappe the southernmost basin position. In the ERF segment the central basin is represented by the Greifenstein nappe and the southernmost basin by the Kahlenberg nappe. Both out-of-sequence units do not occur in the northernmost and tectonically lowest position in their respective nappe piles as they were thrust over the other nappes. The reconstructed basin positions of the thrust units are suggested by the observation of a gradient in heavy mineral content in the thrust units. This paleogeographic arrangement is least problematic and renders models with differently positioned thrust units, requiring debris-shedding intrabasinal ridges, as unnecessarily complicated. Instead, we suggest that gradual changes in heavy mineral composition existed in across-basin direction. Garnet may stem from the Central Gneiss Complex of the Tauern window and formerly exposed lateral equivalents, all representing the southern Mid-Penninic zone. We assign the Falknis/Tasna nappe and formerly exposed lateral equivalents to the northern Mid-Penninic zone which served as the zircon/ZTR source. Interpreting Ebbing’s (Ph.D. thesis, Freie Universität Berlin, pp 1-143, 2002; Fig. 6.10) density section, we suggest that Mid-Penninic crust exists beneath the Central Gneiss Complex. During the latest Cretaceous much garnet was also N-derived. This may reflect processes related to the consumption of the North Penninic basin.     

Quantitative basin characterisation to refine debris-flow triggering criteria and processes: an example from the Italian Western Alps

This paper investigates rapid channelized debris flow related to rainfalls in small alpine basins. Its goal is to evaluate and correlate different geological and technical aspects with predisposing and triggering factors that can control these phenomena. The study area is the upper part of the Susa Valley where 12 small basins were selected. For each of them, lithological, geomorphological, climatic and technical information were mapped and analysed. Debris-flow triggering conditions, flow and depositional processes were related to physical characteristics of the basin that can be easily measured and quantified. At least three different groups of basins were found: G1) basins with one event each 4–6 years, characterised by massive or blocky calcareous rocks, G2) basins with more than one event per year that show an abundance of layered or sheared fine-grained rocks and G3) basins with recurrence levels exceeding 10 years, activated only by heavy and prolonged rainfalls, marked by massive or blocky coarse-grained igneous rocks. Furthermore, important morphometric differences were found. These considerations are useful in terms of hazard zonation and risk mitigation.