Re-Os同位素对峨眉山大火成岩省成因制约的探讨

峨眉山大火成岩省（ELIP）主要由玄武岩、玄武质火山碎屑岩及少量的苦橄岩（包括越南的科马提岩）、长英质岩石以及层状岩体和岩墙组成,其物质来源直接关系到其成因是否与地幔柱活动有关。Re-Os同位素体系是地核、地幔和地壳物质的最佳示踪剂。前人对ELIP内的Re-Os同位素研究表明,低Ti玄武岩的Os含量为0．006×10^-9-0．40010^-9,^187Os／^188Os初始值为0．1371～1．403,并提出其与地幔柱活动有关;而高Ti玄武岩的Os含量为0．00410^-9～0．56010^-9,^187Os／^188Os初始值为0．1271～5．19,认为起源于大陆岩石圈地幔或地幔柱上升过程中受到大量岩石圈地幔“混染”（xu JF et al．,2007）;科马提岩的0s含量为1．2410^-9～7．0010^-9,^187Os／^188Os初始值为0．1251～0．1261,苦橄岩的Os含量为0．3210^-9～2．32910^-9,^187Os／^188Os初始值为0．1233～0．1266,指示苦橄岩和科马提岩均来自亏损地幔源区（Hanski et al．,2004;陈雷等,2007）。本文利用Os含量最低、^187Os／^188Os最高的高Ti玄武岩作为地壳端员,用铁质陨石、原始上地幔（PUM）和亏损地幔（DMM）作为地核和各种地幔端员,分别做二元混合计算,结果显示绝大多数玄武岩和所有苦橄岩及科马提岩均落在地壳和DMM混合曲线附近,并且邻区特提斯洋地幔岩与DMM具有相近的Os含量和^187Os／^188Os组成,据此推测峨眉山火成岩的形成与特提斯洋的活动有关,主要受控于地壳和亏损地幔的相互作用。     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

Prolonged Magmatic and Tectonic Development of the Caribbean Igneous Province Revealed by a Diving Submersible Survey

Using the diving submersible survey NAUTICA we investigated the central part of the Caribbean large igneous province (CLIP) to observe and sample internal portions of this proposed oceanic plateau. Most of the samples are gabbroic and doleritic rocks; basalts are scarce. Radiometric dating by ⁴⁰Ar/³⁹Ar incremental heating experiments indicate that the intrusive rocks are Campanian in age (81–75 Ma). In some places these intrusive rocks underlie older Santonian (85–83 Ma) extrusive basaltic rocks, suggesting that the Campanian rocks represent a sill injection and an underplating episode. Results of the diving program supplemented by information from ODP and DSDP drilling sites document a 20 m.y. period (94–75 Ma) of igneous activity in the submerged portion of the Caribbean large igneous province (CLIP). In the northern part of the Beata Ridge late Campanian and/or post Campanian uplift is documented by prominent Maastrichtian (71–65 Ma) erosion and the establishment of a Paleocene-middle Eocene (65–49 Ma) carbonate platform. During and after the uplift an extensional period is indicated by seismic images and the subsidence (3 km depth) of the carbonate platform. Paleocene ages (55–56 Ma) determined on some volcanic samples are attributed to localised decompression mantle melting that accompanied the extension. We document a prolonged period of magmatic and tectonic events that do not fit with the current models of short-lived plateau formation during mantle plume initiation but shares many similarities with the constructional histories of other oceanic large igneous provinces.     

利用X射线衍射测定单斜辉石中硬玉组分含量

硬玉是单斜辉石中十分重要的端元组分,是单斜辉石分类的主要基础。利用x射线衍射分析确定的硬玉组分含量计算式为Jd(％)=[A-2.235]×25.741,其中Jd为硬玉组分百分含量,A为2—Theta角为30°(d=2.97)时峰值的相对强度Ⅰ与半高宽的乘积,其计算误差仅6.32％。     

Diagnosis of iridovirus in large yellow croaker by PCR

A rapid and sensitive PCR-based method for the detection of the large yellow croaker iridovirus(LYCIV) is described,which involves the amplification of a 295 bp fragment of the LYCIV ATPase gene from DNA isolated from naturally infected fish spleen.Sequencing of LYCIV ATPase gene fragment showed it shared 100% nucleotide sequence homology with the corresponding region of the ATPase gene of red sea bream iridovirus(RSIV) and sea bass iridovirus(SBIV),suggesting that LYCIV was homologous with RSIV and SBIV at least in part of the gemone.The specificity and sensitivity of the PCR procedure were tested on the iridovirus-infected fishes,the expected fragment was detected from spleen DNA samples of infected fishes,whereas no fragments were amplified from healthy fish spleen DNA,white spot syndrome baculoviruses(WSBV) DNA and pseudorabies virus(PRV) DNA.Detection limit of this method was 10^-7 ng positive plasmid DNA containing target sequence,equal to about 100 virions.In the infected experiment,first positive detection(1/4) appeared at Day 3 post-infection,all fish(4/4) tested positive at Day 7,however obvious symptoms were observed at Day 8,so LYCIV infection could be detected prior to the appearance of obvious symptoms.These results indicate that this PCR method could be used for early,rapid and specific detection of LYCIV infection.     

Characterization of Estuarine Marine Clays for Coastal Reclamation in Pusan, Korea

Large scale reclamation works in coastal areas of the Nakdong River plain are at various stages of progress, since early 1990's on in-situ soft marine clay deposits. These deposits are of the order of 30 to 40 m thick. A realistic rapid characterization of soft ground would ensure success of any reclamation work in this area. In order to cope with the work carried out with different agencies, it is desirable to evolve a systematic methodology. In this study, engineering properties of clays at three coastal areas, Gadukdo, Noksan and Shinho, have been generated. The analysis of data has been done within the framework of classical developments in soil mechanics. Analysis has also been made by making use of the recent developments in dealing with soft clays. The dominant factors, namely, stress, time, and environment influencing the response of clay to loading are identified.     

Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.     

川滇密西西比河谷型铅锌矿床成矿流体来源研究:流体Na-Cl-Br体系的证据

应用流体包裹体滤液分析方法，测定了川滇7个MVT铅锌矿床成矿流体的Na,Cl,Br含量，结果表明成矿流体的x(Na/Br)和x(Cl/Br)的平均值分别为185和73，并与高度蒸发浓缩的残留海水的x(Na/Br)和x(Cl/Br)相近。成矿流体的Na,Cl含量呈正相关，在lgNa-lgCl图解中呈线性分布。根据这些事实以及矿床地质特征，认为原始成矿卤水起源于蒸发浓缩的残留海水，原始含矿卤水与富含有机质的大气降水混合导致矿质沉淀而成矿。     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).