Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.     

Effects of high-order nonlinear interactions on unidirectional wave trains

Numerical simulations of gravity waves with high-order nonlinearities in two-dimensional domain are performed by using the pseudo spectral method. High-order nonlinearities more than third order excite apparently chaotic evolutions of the Fourier energy in deep water random waves. The high-order nonlinearities increase kurtosis, wave height distribution and H_max/H_1/3 in deep water and decrease these wave statistics in shallow water. Moreover, they can generate a single extreme high wave with an outstanding crest height in deep water. High-order nonlinearities (more than third order) can be regarded as one cause of freak waves in deep water.     

Internal wave eigenmodes and their weak nonlinear resonant interaction in a nonlinearly stratified fluid—A preliminary theoretical and experimental study

A preliminary theoretical and experimental study was conducted on internal wave modes and their weak nonlinear resonant interaction in a nonlinearly stratified fluid. An asymptotical solution of the modes and a dispersion relation of internal waves in a stratified fluid with density profile similar to that in our experiment were obtained theoretically. The resonant-interaction mechanism to 2nd order approximation is also discussed. The resonant interaction of the 3rd and 4th mode internal waves excited by the unstable 1st mode wave is analyzed on the basis of data obtained by conductivity probes. The resonant-interaction condition, i.e., ,k ₁+k ₃+k ₄=0, is examined. It is shown that the resonant instability increases with pycnocline thickness and wave maker driving frequency. This work is supported by the National Natural Science Foundation of China.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

An implementation of rock engineering system for ranking the instability potential of natural slopes in Greek territory. An application in Karditsa County

This paper presents an application of rock engineering system (RES) in an attempt to reveal and assess the inherent instability potential of 388 sites where equivalent landslides have been manifested and recorded in the region of Karditsa County, Greece. The main objective has been defining the principal causative and triggering factors responsible for the manifestation of landslide phenomena, quantify their interactions, obtain their weighted coefficients, and calculate the instability index, which refers to the inherent potential instability of each natural slope of the examined region. From the statistical interpretation of the data reported in a well-documented database and concerning the examined failure sites, a clear correlation between the instability index and the area affected by a single landslide event has been revealed. Almost the entire failure sites, 98% of the examined slope sites, exhibit an instability index value over 55, a value which is thought to be a critical threshold for landslide manifestation concerning natural slopes in Karditsa County. It is argued that the presented RES methodology, engaging the selected set of parameters, could be considered as an effective expert's tool for ranking, in an objectively optimal and simple way, the instability potential of natural slopes in Karditsa County, and thus providing a tool for sound zoning landslide hazard.     

Post-seismic relaxation following the great 2004 Sumatra-Andaman earthquake on a compressible self-gravitating Earth

The   M _w γ 9.0  2004 December 26 Sumatra-Andaman and   M _w = 8.7  2005 March 28 Nias earthquakes, which collectively ruptured approximately 1800 km of the Andaman and Sunda subduction zones, are expected to be followed by vigorous viscoelastic relaxation involving both the upper and lower mantle. Because of these large spatial dimensions it is desirable to fully account for gravitational coupling effects in the relaxation process. We present a stable method of computing relaxation of a spherically-stratified, compressible and self-gravitating viscoelastic Earth following an impulsive moment release event. The solution is cast in terms of a spherical harmonic expansion of viscoelastic normal modes. For simple layered viscoelastic models, which include a low-viscosity oceanic asthenosphere, we predict substantial post-seismic effects over a region several 100s of km wide surrounding the eastern Indian Ocean. We compare observed GPS time-series from ten regional sites (mostly in Thailand and Indonesia), beginning in 2004 December, with synthetic time-series that include the coseismic and post-seismic effects of the 2004 December 26 and 2005 March 28 earthquakes. A viscosity structure involving a biviscous (Burgers body) rheology in the asthenosphere explains the pattern and amplitude of post-seismic offsets remarkably well.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.