非均匀陆面条件下区域蒸散量计算的遥感模型

非均匀陆面条件下的区域蒸散计算是一个复杂的问题。文中首先在利用遥感资料求取地表特征参数 (如植被覆盖度、地表反照率等 )的基础上 ,建立了裸露地表条件下的裸土蒸发和全植被覆盖条件下植被蒸腾计算模型 ,然后结合植被覆盖度 (植被的垂直投影面积与单位面积之比 )给出非均匀陆面条件下的区域蒸散计算方法。实测资料验算表明该模型具有较高的计算精度。文章最后利用该模型对中国北方地区的蒸散量进行了计算 ,并对该研究区蒸散的特点进行了分析     

管井降水技术在多种含水介质基坑工程中的应用

结合蚌埠城市中心广场会展中心工程，介绍了管井降水技术在多种含水介质的复杂地质环境下的应用。     

地热井常见主要问题分析与研究

针对目前地热井施工技术现状及地热井使用中常见的问题，进行了较为详细的分析和研究，并就今后发展方向和建议进行了初步探讨。     

Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

CGD-1型大口径全套管冲击抓斗的设计和应用

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。     

四川平武银厂金矿勘探复杂地层钻进技术

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。     

潜孔锤偏心跟管钻进法在卵砾石地层岩土工程勘察中的应用

卵砾石地层是钻探工程中常见的一种典型的难钻进不稳定地层。通过采用潜孔锤偏心跟管钻进法,从根本上解决了卵砾石地层难以钻进的难题,结合都匀市区岩土工程勘察实例,笔者认为潜孔锤偏心跟管钻进法是在卵砾石地层钻进中行之有效的一种钻进法。     

Study on deepwater conductor jet excavation mechanism in cohesive soil

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.     

非均匀介质热蠕变流动的数值求解

针对非均匀介质中热蠕变流动问题,给出了有限单元方法与网格－粒子方法联合求解新技术,即有限单元方法求解欧拉网格节点上的未知量,分布于单元内部作为物质成分标记的粒子反映变形过程.有限元法求解动量方程和连续性方程时引入了速度场和压力场等阶插值的压力场稳定的Petrov Galerkin方法,求解能量方程时采用了流线迎风Petrov Galerkin方法,网格－粒子算法中采用双线性插值与有限单元插值函数对应.有限单元计算与网格－粒子计算相对独立,两种方法计算的数据通过有限单元节点传递.同时,实现了三角形单元的算法和程序,解决了复杂结构条件下不规则网格计算的问题.通过经典方腔热对流问题验证了程序,给出了不规则形态块体沉降算例,并分析了数值解的稳定性.     

200hPa非地转风和非均匀层结与梅雨暴雨的关系

本文通过1991年梅雨后期，7月1—13日200hPa非地转场分析得出，梅雨期200hPa非地转风主要由积云对流动量转换形成。其次是风速平流，并通过数值试验得以证明。非地转风形成的高层辐散，可进一步使暴雨增强与维持。另外梅雨期非均匀层结对非地转风及暴雨也有较大的影响。