Dynamics of co-ignimbrite plumes generated from pyroclastic flows of Mount St. Helens (7 August 1980)

 Four co-ignimbrite plumes were generated along the flow path of the pyroclastic flow of 7 August 1980 at Mount St. Helens. Three of the plumes were generated in discrete pulses which can be linked to changes in slope along the channel. One plume was generated at the mouth of the channel where the flow decelerated markedly as it moved onto the lower slopes of the pumice plain. Plume generation here may be triggered by enhanced mixing due to a hydraulic jump associated with an abrupt slope change. Measurements of plume ascent velocity and width show that the co-ignimbrite plumes increased in velocity with height. The plumes have initial velocities of 1–2 m/s. Two of the plumes reached a velocity maximum (4.6 and 8.8 m/s, respectively, at heights of 270 and 315 m above the flow) and thereafter decelerated. The other plumes reached velocities of 6.2 and 13 m/s. The four plumes become systematically less energetic downstream as measured by their ascent rates, which can be interpreted as a consequence of decreasing interaction of the pyroclastic flow front with the atmosphere. Theoretical models of both co-ignimbrite plumes and discrete co-ignimbrite clouds assume that there is no initial momentum, and both are able to predict the observed acceleration stage. The rising plumes mix with and heat air and sediment out particles causing their buoyancy to increase. Theoretical models agree well with observations and suggest that the initial motion of the ascending material is best described as a discrete thermal cloud which expands as it entrains air, whereas the subsequent motion of the head may become influenced by material supplied from the following plume. The models agree well with observations for an initial temperature of the ash and air mixture in the range of 500–600 K, which is in turn consistent with the measured initial ash temperature of around 920 K. Ash masses of 3.4×10⁵ to 1.8×10⁶ kg are estimated. Received: 11 January 1996 / Accepted: 7 October 1996     

BOOK REVIEWS

Book Reviewed in this article: Marine Resources of Kuwait: Their Role in the Development of Non-oil Resources . Fatimah H. Y. al -Abdul -Razzak Recollections of a Revolution: Geography as Spatial Science . Mark Billinge , Derek Gregory and Ron Martin Entre l'Eden et l'Utopie . Luc Bureau Developments in Political Geography . M. A. Busteed The Elements of Graphing Data . William S. Cleveland Rural Resource Management . Paul J. Cloke and Chris C. Park Third World Atlas . Ben Crow and Alan Thomas Exploitation, Conservation, Preservation: A Geographic Perspective on Natural Resource Use . Susan L. Cutter , Hilary Lambert Renwick, and William H. Renwick . Wine Regions of the Southern Hemisphere . Harm Jan de Blij Regional Development: Problems and Policies in Eastern and Western Europe . George Demko The Geographer at Work . Peter R. Gould Change in the Amazon Basin . John Hemming Geography Since the Second World War . R. J. Johnston and P. Claval Urbanization in China: Town and Countryside in a Developing Economy 1949–2000 A.D. , R. J. R. Kirkby Transport and Communications for Pacific Microstates: Issues in Organisation and Management . Christopher C. Kissling Fluvial Forms and Processes . David Knighton The Urban Millennium . Josef W. Konvitz Technological Transition in Cartography . Mark Stephen Monmonier Field Guide to Soils and the Environment: Applications of Soil Surveys . Gerald W. Olson Northern Australia: The Arenas of Life and Ecosystems on Half a Continent . Don Parkes A Killing Rain: The Global Threat of Acid Rain . Thomas Pawlick From the Family Farm to Agribusiness: The Irrigation Crusade in California and the West, 1850–1931 . Donald J. Pisani Hybrid Maize Diffusion in Kenya . Franz -Michael Rundquist Warning and Response to the Mount St. Helens Eruption . Thomas F. Saarinen and James L. Sell Coastal Geomorphology in Australia . B. G. Thom Tropical Rain Forests of the Far East , 2nd ed . T. C. Whitmore The Dark Side of the Earth . Robert Muir Wood Categorical Data Analysis for Geographers and Environmental Scientists , Neil Wrigley     

Cliff retreat and talus development at the caldera wall of Mount St. Helens: Computer simulation using a mathematical model

To simulate the landform evolution at the caldera wall of Mount St. Helens, USA, a mathematical model for talus development was applied to model the topographic change during the 11years from the volcanic eruption, i.e., from formation of the cliff. Simulated results show that the topographic change is predicted to be large for about 10years after the eruption and to decline thereafter. If snow accumulation in the talus slope deposits is negligible, the talus top will not reach the cliff top within 300years after the eruption. Talus growth in Mount St. Helens was much faster than that in the Chichibu Basin, Japan. This may indicate the low strength and/or high weathering rate of the rockwall of Mount St. Helens, resulting in rapid production of debris and rapid retreat of the cliff.     

Using amphibole phenocrysts to track vapor transfer during magma crystallization and transport: An example from Mount St. Helens,Washington

In order to evaluate and further constrain models for volatile movement and vapor enrichment of magma stored at shallow levels, amphibole phenocrysts from 2004–2005 Mount St. Helens dacite were analyzed for major and selected trace elements (Li, Cu, Zn, Mn, and REE) and Li isotopes. Several recent studies have examined fluid-mobile trace element abundances in phencryst phases and melt inclusions as a means of tracking volatile movement within subvolcanic magmatic systems, and high Li contents in plagioclase phenocrysts from 1980 and 2004 Mount St. Helens dacites have been interpreted as evidence that shallow magma was fluxed by a Li-bearing vapor phase prior to eruption.     

Simulation of the 1980 eruption of Mount St. Helens using the ash-tracking model PUFF

The dispersal of volcanic ash from the May 18, 1980 eruption of Mount St. Helens (MSH) has been simulated using the Lagrangian ash-tracking model PUFF. Previous applications of the model were limited to smaller, short-lived eruptions with ash dispersal occurring mainly within the troposphere. Two high-resolution atmospheric reanalysis datasets (ERA-40 and NCEP/NCAR-40) allowed MSH ash cloud dispersal to be simulated up to 30 km elevation. The 1980 eruption was divided into two distinct eruptive phases, (1) an initial, relatively short-lived blast/surge phase that injected ash up to 30 km and (2) a subsequent nine-hour plinian phase that maintained an average eruption column height of 16 km. Using PUFF, the two phases of the MSH eruption were modeled separately based on a range of individual input parameters and then combined to produce an integrated simulation of the entire eruption. The trajectory and areal extent of the modeled atmospheric ash cloud best match the actual distribution of MSH ash when input parameters are set to values inferred from satellite and radar data collected on May 18, 1980. The prevailing wind field exerts the strongest control on the advection and ultimate position of the modeled ash cloud, making the maximum column height and the vertical distribution of ash the most sensitive of the PUFF input parameters for this event. The results indicate that the PUFF model works well at simulating the dispersal of ash injected well into the lower stratosphere from a moderate, relatively long-lived eruption, such as MSH. However, attempts to use PUFF to recreate some granulometric aspects of the MSH fallout deposit, such as the maximum particle size as a function of distance from source, were not successful. PUFF consistently predicts much greater fallout distances for small ash particles (< 500 µm) than actually observed in the MSH deposit. The effective settling velocities used by the PUFF model appear to be too slow to accurately predict fallout distances of small ash particles. As a consequence the PUFF model may overestimate the duration of ash loading in the atmosphere associated with the distal fine ash component of explosive eruptions.     

Effects of eruption history and cooling rate on lava dome growth

To better understand the factors controlling the shapes of lava domes, laboratory simulations, measurements from active and prehistoric flows and dimensional analysis were used to explore how effusion history and cooling rate affect the final geometry of a dome. Fifty experiments were conducted in which a fixed volume of polyethylene glycol wax was injected into a tank of cold sucrose solution, either as one continuous event or as a series of shorter pulses separated by repose periods. When the wax cooling rates exceeded a critical minimum value, the dome aspect ratios (height/diameter) increased steadily with erupted volume over the course of a single experiment and the rate at which height increased with volume depended linearly on the time-averaged effusion rate. Thus the average effusion rate could be estimated from observations of how the dome shape changed with time. Our experimental results and dimensional analyses were compared with several groups of natural lava flows: the recently emplaced Mount St Helens and Soufrière domes, which had been carefully monitored while active; three sets of prehistoric rhyolite domes that varied in eruptive style and shape; and two sets of Holocene domes with similar shapes, but different compositions. Geometric measurements suggest that dome morphology can be directly correlated with effusion rate for domes of similar composition from the same locality, and that shape alone can be related to a dimensionless number comparing effusion rate and cooling rate. Extrapolation to the venusian pancake domes suggests that they formed from relatively viscous lavas extruded either episodically or at average effusion rates low enough to allow solidified surface crust to exert a dominating influence on the final morphology.     

Crystallization of microlites during magma ascent: the fluid mechanics of 1980–1986 eruptions at Mount St Helens

Eruptions of Mount St Helens (Washington, USA) decreased in intensity and explosivity after the main May 18, 1980 eruption. As the post-May 18 eruptions progressed, albitic plagioclase microlites began to appear in the matrix glass, although the bulk composition of erupted products, the phenocryst compositions and magmatic temperatures remained fairly constant. Equilibrium experiments on a Mount St Helens white pumice show that at 160 MPa water pressure and 900°C, conditions deduced for the 8 km deep magma storage zone, the stable plagioclase is An₄₇. The microlites in the natural samples, which are more albitic, had to grow at lower water pressures during ascent. Isothermal decompression experiments reported here demonstrate that a decrease in water pressure from 160 to 2 MPa over four to eight days is capable of producing the albitic groundmass plagioclase and evolved melt compositions observed in post-May 18 1980 dacites. Because groundmass crystallization occurs over a period of days during and after decreases in pressure, microlite crystallization in the Mount St Helens dacites must have occurred during the ascent of each magma batch from a deep reservoir rather than continuously in a shallow holding chamber. This is consistent with data on the kinetics of amphibole breakdown, which require that a significant portion of magma vented in each eruption ascended from a depth of at least 6.5 km (160 MPa water pressure) in a matter of days. The size and shape of the microlite population have not been studied because of the small size of the experimental samples; it is possible that the texture continues to mature long after chemical equilibrium is approached. As the temperature, composition, crystal content and water content of magma in the deep reservoir remained approximately constant from May 1980 to at least March 1982, the spectacular decrease in eruption intensity during this period cannot be attributed to changes in viscosity or density of the magma. Simple fluld mechanical considerations indicate, however, that the observed changes in mass flux of magma can be modelled by a five-fold decrease in conduit radius from 35 to 7 m, produced perhaps by plating of magma along the conduit walls. The decreased ascent rates which accompanied the decrease in conduit radius can explain the change from closed-system to open-system degassing and the shift from explosive to effusive eruptions during 1980.     

Experimental constraints on pre-eruptive water contents and changing magma storage prior to explosive eruptions of Mount St Helens volcano

Compositionally diverse dacitic magmas have erupted from Mount St Helens over the last 4000 years. Phase assemblages and their compositions in these dacites provide information about the composition of the pre-eruptive melt, the phases in equilibrium with that melt and the magmatic temperature. From this information pre-eruptive pressures and water fugacities of many of the dacites have been inferred. This was done by conducting hydrothermal experiments at 850°C and a range of pressures and water fugacities and combining the results with those from experiments at temperatures of 780 and 920°C, to cover the likely range in equilibration conditions of the dacites. Natural phase assemblages and compositions were compared with the experimental results to infer the most likely conditions for the magmas prior to eruption. Water contents disolved in the melts of the dacites were then estimated from the inferred conditions. Water contents in the dacites have varied greatly, from 3.7 to 6.5 wt.%, in the last 4000 years. Between 4000 and about 3000 years ago the dacites tended to be water saturated and contained 5.5 to 6.5 wt.% water. Since then, however, the dacites have been significantly water-undersaturated and contained less than 5.0 wt.% water. These dacites have tended to be hotter and more mafic, and andesitic and basaltic magmas have erupted. These changes can be explained by variable amounts of mixing between felsic dacite and basalt, to produce hotter, drier and more mafic dacites and andesites. The magma storage region of the dacitic magmas has also varied significantly during the 4000 years, with shifts to shallower levels in the crust occurring within very short time periods, possibly even two years. These shifts may be related to fracturing of overlying roof rock as a result of magma with-drawal during larger volume eruptions.     

Multiple levels of magma storage during the 1980 summer eruptions of Mount St. Helens, WA

Transitions in eruptive style—explosive to effusive, sustained to pulsatory—are a common aspect of volcanic activity and present a major challenge to volcano monitoring efforts. A classic example of such transitions is provided by the activity of Mount St. Helens, WA, during 1980, where a climactic Plinian event on May 18 was followed by subplinian and vulcanian eruptions that became increasing pulsatory with time throughout the summer, finally progressing to episodic growth of a lava dome. Here we use variations in the textures, glass compositions and volatile contents of melt inclusions preserved in pyroclasts produced by the summer 1980 eruptions to determine conditions of magma ascent and storage that may have led to observed changes in eruptive activity. Five different pyroclast types identified in pyroclastic flow and fall deposits produced by eruptions in June 12, July 22 and August 7, 1980, provide evidence for multiple levels of magma storage prior to each event. Highly vesicular clasts have H₂O-rich (4.5–5.5 wt%) melt inclusions and lack groundmass microlites or hornblende reaction rims, characteristics that require magma storage at P≥160 MPa until shortly prior to eruption. All other clast types have groundmass microlites; P_H20 estimated from both H₂O-bearing melt inclusions and textural constraints provided by decompression experiments suggest pre-eruptive storage pressures of ∼75, 40, and 10 MPa. The distribution of pyroclast types within and between eruptive deposits can be used to place important constraints on eruption mechanisms. Fall and flow deposits from June 12, 1980, lack highly vesicular, microlite-free pyroclasts. This eruption was also preceded by a shallow intrusion on June 3, as evidenced by a seismic crisis and enhanced SO₂ emissions. Our constraints suggest that magma intruded to a depth of ≤4 km beneath the crater floor fed the June eruption. In contrast, eruptions of July and August, although shorter in duration and smaller in volume, erupted deep volatile-rich magma. If modeled as a simple cylinder, these data require a step-wise decrease in effective conduit diameter from 40–50 m in May and June to 8–12 m in July and August. The abundance of vesicular (intermediate to deep) clast types in July and August further suggests that this change was effected by narrowing the shallower part of the conduit, perhaps in response to solidification of intruded magma remaining in the shallow system after the June eruption. Eruptions from July to October were distinctly pulsatory, transitioning between subplinian and vulcanian in character. As originally suggested by Scandone and Malone (1985), a growing mismatch between the rate of magma ascent and magma disruption explains the increasingly pulsatory nature of the eruptions through time. Recent fragmentation experiments Spieler et al. (2004) suggest this mismatch may have been aided by the multiple levels at which magma was stored (and degassed) prior to these events.Editorial responsibility: J Stix