风沙路基施工技术初探

路基施工中保证路基填筑密实度，通常沙土路基采用水夯；普通路基采用振动碾、羊角碾等重型机具振密夯实。但在缺电、缺水，高气温、大风沙的沙漠气候等恶劣的施工条件下，风沙路基的施工如何保证路基填筑的密实度和施工机械在风沙路基上作业而不陷车的问题，就目前没有合适的经验可借鉴，也没有规范可参考。因此把在包西线神木北至延安北段的铁路工程建设中风沙路基施工所取得的经验和施工技术作一介绍。     

象山港,三门湾潮间带生态学研究：Ⅱ.数量组成与分布

象山港、三门湾软相潮间带底栖动物数量的水平分布与港湾的屏蔽性程度有一定的关系，生物量是三门湾（１８０．９５ｇ／ｍ２）高于象山港（９４．４７ｇ／ｍ２），生物密度是象山港（８１６个／ｍ２）高于三门湾（３４７个／ｍ２）。决定所面生物数量变化的主要底栖动物种类数随着港湾屏蔽性程度的提高而相应地减少。生物数量的垂直分布主要受潮汐作用的影响，以中潮区为最高。生物量以６月份最大，密度是４月份最大。     

0010号台风"碧利斯"对厦门港湾表层海水中溶解无机砷含量的影响

本文研究了0010号台风“碧利斯”影响期间及其随后的恢复期中,厦门港湾中九龙江口和西港海域站表层海水总溶解砷（TDIAs)、As^3 含量和As^3 /As^5 值的变化特征。结果表明,观测期间两站TDIAs和As^5 含量均比非台风时期呈数倍增加,经10d后仍未恢复到非台风时的水平。As^3 含量也有较大幅度的增加,但波动较大。文中还对观测期间影响溶解无机砷含量的因素进行了初步的探讨。     

新型全封闭刀口联合式管口封的设计及应用

重力活塞取样器是海洋地质调查不可缺少的调查设备，而管口封又是重力活塞取样器的重要部件。管口封的好坏不但影响到取样器的贯入深度和取芯丰，还影响到所取岩芯的质量．介绍了一种最近研制成功的新型全封闭刀口联合式管口封。海上实验在特定海区成功的获取了17．11m的长岩芯，取样率达91．3％，创造了我国海洋地质调查用重力活塞取样器获取岩心的最长记录。该设计已通过国家知识产权局批准授予实用新型专利。     

应用六氯化苯测年法对厦门港现代沉积速率的测定

岩芯柱样用静力岩芯采样器于1986年采自福建省厦门港一九龙江口海域。通过对这些岩芯柱样中六氯化苯(BHC)的垂直分布状况和生物扰动类型的分析,应用 S_R=D_(BHC-D_(mix)/Y的计算模式,获得了这些岩芯的现代沉积速率数据。将这些数据、方法与原理完全不同的~(210)Pb放射性同位素测年法同岩芯测年数据比较,其结果在数据和数量级上有一定可比性。初步认为,再经进一步探索和改进,BHC测年法有可能应用于近岸河口港湾几十年来现代沉积速率的测定而与其它测年法互为补充。     

The permeability of faults within siliciclastic petroleum reservoirs of the North Sea and Norwegian Continental Shelf

Faulting in Middle Jurassic reservoirs occurred at shallow depth during regional extension. Clean sandstones (<15% clay) deformed without significant grain fracturing and permeability reduction. Faults in impure sandstones (15–40% clay) experienced significant syn-deformation compaction and permeability reduction. Enhanced compaction during deeper burial reduced their permeabilities further from an average of 0.05 mD at <2.5 km to 0.001 mD at >4 km. Clay-rich sediments (>40% clay) deformed to produce clay smears with very low permeabilities (<0.001 mD). Faulting in the Rotliegendes occurred at greater depth during both basin extension and inversion. Extensional faulting produced cataclasites with permeability reductions of <10–>10⁶; their permeabilities range from 0.2 to 0.0001 mD and are inversely related to their maximum burial depth. Faults formed or reactivated during inversion experienced permeability increase. These results can be extrapolated to other hydrocarbon reservoirs if differences in stress and temperature history are taken into account.The permeability of most (>80%) faults is not sufficiently low, compared to their wallrock, to retard single-phase fluid flow on a km-scale. Nevertheless, most faults could retard the flow of a non-wetting phase if present at low saturations. It may be necessary to incorporate the two-phase fluid flow properties of fault rocks into reservoir simulators using upscaling or pseudoisation techniques. Fault property data should be calibrated against production data before it can be used confidently.