Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

频率域电磁法中视电阻率全区定义

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。     

基于不同GCP数量和获取方法的数字正射影像的制作与评定

SPOT-5影像的高分辨率和高信息量的性质,使其得到了广泛的应用,特别是在全国第二次土地利用调查中得到了更加深入的应用。而数字正射影像的制作是SPOT-5遥感影像应用的关键所在。本文在介绍DOM制作的基础上,依据当前获取GCP主要的三种途径采用ERDAS遥感图像处理软件进行了实验,并对最终的结果精度进行分析,总结了DOM制作过程的相关问题。     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Horizontal and vertical components of earthquake ground motions at liquefiable sites

Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures.     

Fuzzy neural network models for liquefaction prediction

Integrated fuzzy neural network models are developed for the assessment of liquefaction potential of a site. The models are trained with large databases of liquefaction case histories. A two-stage training algorithm is used to develop a fuzzy neural network model. In the preliminary training stage, the training case histories are used to determine initial network parameters. In the final training stage, the training case histories are processed one by one to develop membership functions for the network parameters. During the testing phase, input variables are described in linguistic terms such as ‘high’ and ‘low’. The prediction is made in terms of a liquefaction index representing the degree of liquefaction described in fuzzy terms such as ‘highly likely’, ‘likely’, or ‘unlikely’. The results from the model are compared with actual field observations and misclassified cases are identified. The models are found to have good predictive ability and are expected to be very useful for a preliminary evaluation of liquefaction potential of a site for which the input parameters are not well defined.     

山西大同——阳高5.6级地震离石台地倾斜异常特征分析

1999年 11月 1日 ,在山西大同—阳高一带发生了 Ms5 .6地震。山西离石地震台依据该台地倾斜观测出现的异常 ,震前对这次地震作了较好的短临地震预报 ,为了探讨单台地震预报的方法 ,在该次短临预报的基础上 ,进一步用差分法、滤波法、矢量法、形态分析法对观测资料作了进一步的处理 ,发现该台地倾斜震前异常反映较好 ,具有明显的阶段性特征。指出 ,这对山西的地震监测预报有重要的作用。     

电法在濒海及岛屿地区寻找地下淡水中的应用

采用电法的基本原理，研究各种不同岩性和成淡水的电性差畀，划分地下成淡水分界面。在严重缺水的濒海及岛屿地区找到了较好的地下淡水，解决了守岛部队吃水难的问题。