THERIA_G: a software program to numerically model prograde garnet growth

We present the software program THERIA_G, which allows for numerical simulation of garnet growth in a given volume of rock along any pressure–temperature–time (P–T–t) path. THERIA_G assumes thermodynamic equilibrium between the garnet rim and the rock matrix during growth and accounts for component fractionation associated with garnet formation as well as for intracrystalline diffusion within garnet. In addition, THERIA_G keeps track of changes in the equilibrium phase relations, which occur during garnet growth along the specified P–T–t trajectory. This is accomplished by the combination of two major modules: a Gibbs free energy minimization routine is used to calculate equilibrium phase relations including the volume and composition of successive garnet growth increments as P and T and the effective bulk rock composition change. With the second module intragranular multi-component diffusion is modelled for spherical garnet geometry. THERIA_G allows to simulate the formation of an entire garnet population, the nucleation and growth history of which is specified via the garnet crystal size frequency distribution. Garnet growth simulations with THERIA_G produce compositional profiles for the garnet porphyroblasts of each size class of a population and full information on equilibrium phase assemblages for any point along the specified P–T–t trajectory. The results of garnet growth simulation can be used to infer the P–T–t path of metamorphism from the chemical zoning of garnet porphyroblasts. With a hypothetical example of garnet growth in a pelitic rock we demonstrate that it is essential for the interpretation of the chemical zoning of garnet to account for the combined effects of the thermodynamic conditions of garnet growth, the nucleation history and intracrystalline diffusion. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

波,流联合作用下的近岸海底沙波稳定性研究进展

近岸海底大型沙波是一种研究较为薄弱的地貌单元，但它的迁移对港口、航道和海底电缆及钻井平台、输油管道等海洋工程设施建设造成的危害极大。在综述目前国内外有关研究文献的基础上，概要地介绍了作者提出的一种较为简便、省力和有效的沙波迁移速率和沙波稳定性定量评价和预测方法，旨在提高航道通航能力和海洋工程建设的灾害防治和预测能力     

榴辉岩的化学分类

以山东荣成地区的榴辉岩为例,把榴辉岩分为镁一榴辉岩、铁一榴辉岩和钙一榴辉岩三类。三类榴辉岩的岩石化学,主要造岩矿物成分都有明显差别,石榴石分别是镁铝榴石、铁铝榴石和钙铝榴石。绿辉石的硬玉分子也有不同。三类榴辉岩的化学成分限制是Mg-榴辉岩MgO>10%,石榴石以镁铝榴分子占优势,Fe-榴辉岩的MgO<10,石榴石以铁铝榴石分子占优势。Ca-榴辉岩CaO>19%,石榴石以钙铝榴石分子优势。     

Current-induced scour beneath initially elevated subsea pipelines

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.     

剩磁-温度谱与冷却模式

本文解释热剩磁和粘滞剩磁的阻挡过程。较慢冷却伴随较低的阻挡温度。一组同一的磁颗粒,其实验室解阻温度不一定等于其磁化成分的阻挡温度。冷却速率不同,重排剩磁量会不同,两者的关系与磁畴状态有关。距烘烤体不同距离采集磁颗粒分布相同的围岩样品,在一定场合下,根据其剩磁-实验室解阻温度谱所示的重排剩磁量的差别,可讨论冷却速度及模型。本文列举苏格兰某些围岩的不同重排剩磁量,讨论有关问题。     

地幔滞弹性对Chandler摆动的影响

基于简正模扰动理论和勒夫数扰动方法,采用Zschau 的地幔流变模型,在假设Chandler摆动的能量全部耗散于地幔滞弹性摩擦的条件下,导出Chandler 摆动Q(Q_w)的理论值.还考虑了滞弹地球的平衡极潮对摆动的影响,所得结果与绝大部分天文实测值非常一致.分析表明.平衡部分的影响大,地幔滞弹性很可能是Chandler 摆动最主要的能量耗散源,Q_w 的理论值约为71.还推算了吸收带模型参数α,研究了该模型的适用性,并讨论了Q_w 与地幔Q(Q_m)的关系.     

Erosion rates in the southern oregon coast range: Evidence for an equilibrium between hillslope erosion and sediment yield

The relationship of hillslope erosion rates and sediment yield is often poorly defined because of short periods of measurement and inherent spatial and temporal variability in erosion processes. In landscapes containing hillslopes crenulated by alternating topographic noses and hollows, estimates of local hillslope erosion rates averaged over long time periods can be obtained by analysing colluvial deposits in the hollows. Hollows act as local traps for a portion of the colluvium transported down hillslopes, and erosion rates can be calculated using the age and size of the deposits and the size of the contributing source area. Analysis of colluvial deposits in nine Oregon Coast Range hollows has yielded average colluvial transport rates into the hollows of about 35cm³cm^?1yr^?1 and average bedrock lowering rates of about 0.07 mm yr^?1 for the last 4000 to 15000 yr. These rates are consistent with maximum bedrock exfoliation rates of about 0.09 mm yr^?1 calculated from six of the hollows, supporting the interpretation that exfoliation rates limit erosion rates on these slopes. Sediment yield measurements from nine Coast Range streams provide similar basin-wide denudation rates of between 0.05 and 0.08mm yr^?1, suggesting an approximate steady-state between sediment production on hillslopes and sediment yield. In addition, modern sediment yields are similar in basins varying in size from 1 to 1500 km², suggesting that erosion rates are spatially uniform and providing additional evidence for an approximate equilibrium in the landscape.     

Evaluation and application of dialysis porewater samplers for microbiological studies at sediment-water interfaces

The equilibrium diffusion technique has become a valuable tool for ecological and biogeochemical studies in aquatic environments. In sediment ecosystems, changes in concentration of microbial metabolites with increasing depth can be determined dependably and reproducibly with this technique. Since the permeation characteristics of the membranes employed are crucial, selecting the proper membrane requires knowledge about its behavior under conditions which prevail in the natural environment. Thirteen polymer sheets were evaluated comparing permeation terms for biogeochemically relevant solutes, biodegradability, and mechanical strength. Cellulose-based dialysis membranes are most satisfactory when employed in low temperature anoxic environments. For this membrane, correction terms were calculated to account for diffusion losses during retrieval and sampling. Optimal incubation times can now be predicted from experimentally determined permeation coefficients for several porewater solutes. Dialysis porewater samplers (DPS) have been successfully applied during more than 100 independent experiments for the collection of interstitial water from surface sediments. DPS were used for water depths as deep as 290 meters.