Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

调频式电涡传感器微机实现的探讨

分析了分频和ＣＴＣ计数采样中误读数的原因和解决方法，并利用微机软件实现非线性校正。此传感器用于位移测量系统中，具有０．０１ｍｍ的分辨率及优于１％的精度，可在－２０～６０℃温度范围内工作。     

Interpretation of transient electromagnetic soundings over three-dimensional structures for the central-loop configuration

Summary. An assessment is made of the bias of fitting constrained layered-earth models to transient electromagnetic data obtained over 3-D structures. In this assessment we use the central-loop configuration and show that accurate estimates of the depth of burial of 3-D structures can be obtained with layered-earth model fitting. However, layered-earth interpretations are not reliable for estimating depth extents and resistivities of 3-D structures. When layered earths are used for interpretation, it is advantageous in some cases to use data based on the magnetic field instead of the voltage. A magnetic-field definition of apparent resistivity, in contrast to a definition based on the voltage, eliminates apparent-resistivity overshoots and undershoots in the data. A resistivity undershoot in the data can produce an extraneous and misleading layer in an interpretation of a 3-D resistive structure. Due to 3-D effects, apparent-resistivity soundings (magnetic field and voltage) may rise so steeply at late times that it may not be possible to fit a sounding to a reasonable layered-earth model. Truncating such a sounding, over a buried conductor, allows for a reasonable layered-earth fit and an accurate estimate of the depth to the conductor. However, the resistivity of the conductor is overestimated.
Measurements of the horizontal field in the central-loop configuration can map 3-D structures, provided the sensor is located accurately at the centre of the transmitting loop. Horizontal-field calculations show that the transients peak on the flanks of a 3-D structure, but are depressed over the structure's centre. Weak transient responses flanked by two large transient responses, which are opposite in sign, locate the structure. The sign reversal is caused by a corresponding reversal in the currents that are channelled through or deflected away from conductive or resistive structures, respectively.     

Integrated approach for identification of potential groundwater zones in Seethanagaram Mandal of Vizianagaram District,Andhra Pradesh,India

Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km² was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

频率域电磁法中视电阻率全区定义

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。     

甚高频电磁波多参数层析成像技术及其应用研究

电磁波速度或衰减层析成像技术单独用于岩溶勘察存在多解性缺陷,降低了应用的准确性.基于电阻率和相对介电常数直接反映溶洞与周围介质存在的电性差异,以电磁波速度和衰减层析成像理论为基础,提出了电阻率和相对介电常数层析成像理论,并应用于实例工程.通过对其电磁波速度、衰减、相对介电常数、电阻率4参数层析成像结果进行对比分析和钻探验证,证明了基于电磁波的电阻率和相对介电常数层析成像技术是可行的,形成了电磁波速度、衰减、相对介电常数、电阻率多参数层析成像综合分析方法,提高了电磁波层析成像技术探测溶洞及其充填情况的准确性.     

应用电性特征研究银川平原地下水水质空间分布规律

以蕴涵丰富地下水系统水循环信息的电性特征为线索,采用电测深法,在分析研究银川平原450 m深度内地下水系统的空间结构的基础上,对平原地下水水质空间分布规律进行了综合研究,为银川平原地下水资源可持续利用战略的制订提供了依据。     

视电阻率曲线在研究聚煤盆地沉积环境分析及聚煤规律中的应用

分析聚煤盆地沉积环境,研究聚煤盆地煤层分布规律,对指导煤田预测和指导勘探工作有着重要的作用。充分利用数字测井的视电阻率曲线来分析、解释原始沉积环境,研究聚煤盆地的煤层分布特点,具有一定的现实意义。     

华北地台地热勘探中利用大地电磁测深法(MT)圈定热田范围和探讨地热形成机制

利用大地电磁测深法（MT）反映地质体的电性差异,首先可以确定地质体的空间展布、地质结构和构连;而由于地质体电阻率受地热水影响而降低,进而据此圈定地热水的分布范围;并在此基础上可以进一步探讨地热形成机制。在华北地台地热勘探中MT法取得了较好的勘探效果。