调频式电涡传感器微机实现的探讨

分析了分频和ＣＴＣ计数采样中误读数的原因和解决方法，并利用微机软件实现非线性校正。此传感器用于位移测量系统中，具有０．０１ｍｍ的分辨率及优于１％的精度，可在－２０～６０℃温度范围内工作。     

Integrated approach for identification of potential groundwater zones in Seethanagaram Mandal of Vizianagaram District,Andhra Pradesh,India

Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km² was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).     

Extension spatiale de la salinisation des ressources en eau et modèle conceptuel des sources salées dans la plaine des Triffa (Maroc nord-oriental)

The succession of drought years and excessive abstraction in the plain of Triffa caused deterioration in water quality and endangers future exploitation of groundwater resources. A combination of geophysical surveys, including electrical resistivity and hydrochemical data has been used to identify the geographical extension of salinization and identify its origin. Electrical conductivity measurements are used to show the history of salinization in space and time. In this paper, a first conceptual model of the brackish springs has been established. To cite this article: M. Boughriba et al., C. R. Geoscience 338 (2006).     

Use of electrical resistivity methods for detecting subsurface fresh and saline water and delineating their interfacial configuration: a case study of the eastern Dead Sea coastal aquifers, Jordan

The alluvial aquifer is the primary source of groundwater along the eastern Dead Sea shoreline, Jordan. Over the last 20 years, salinity has risen in some existing wells and several new wells have encountered brackish water in areas thought to contain fresh water. A good linear correlation exists between the water resistivity and the chloride concentration of groundwater and shows that the salinity is the most important factor controlling resistivity. Two-dimensional electrical tomography (ET) integrated with geoelectrical soundings were employed to delineate different water-bearing formations and the configuration of the interface between them. The present hydrological system and the related brines and interfaces are controlled by the Dead Sea base level, presently at 410 m b.s.l. Resistivity measurements show a dominant trend of decreasing resistivity (thus increasing salinity) with depth and westward towards the Dead Sea. Accordingly, three zones with different resistivity values were detected, corresponding to three different water-bearing formations: (1) strata saturated with fresh to slightly brackish groundwater; (2) a transition zone of brine mixed with fresh to brackish groundwater; (3) a water-bearing formation containing Dead Sea brine. In addition, a low resistivity unit containing brine was detected above the 1955 Dead Sea base level, which was interpreted as having remained unflushed by infiltrating rain.     

3D behaviour of contamination in landfill sites using 2D resistivity/IP imaging: case studies in Portugal

Aiming at defining a valid spatial contamination model, resistivity and induced polarization (IP) measurements were used to investigate contamination plumes in the vicinity of two municipal landfills (Ovar and ílhavo). Previous geophysical surveys and underground water samples confirmed the contamination. However 2D resistivity/IP surveys enabled in obtaining a more accurate spatial model. The Ovar survey consisted of two profiles with nine Wenner soundings each; the ílhavo survey was carried out along two individual lines using a Wenner standard pseudo-section. In both situations, negative IP values were found associated with positive IP values, which can be explained mainly by 2D or 3D geometric effects caused by the presence of the conductive plumes. The data were modelled using a 2D inversion program (RES2DINV) and the resulting resistivity and chargeability distributions were displayed as pseudo-sections. The resistivity and chargeability pseudo-sections define the contamination plumes and the sedimentary structure. These case studies illustrate the advantages of 2D resistivity/IP surveys for the mapping of shape and dimension of contamination associated with landfills.     

Electromagnetic methods to characterize the Savoia di Lucania waste dump (Southern Italy)

The aim of this work is the joint application and integration of non-invasive geoelectrical methods for studying the landfill of Savoia di Lucania (Southern Italy). This landfill for its engineering features and small dimensions (70 m × 30 m × 6 m) represents an optimal test site to assess a geophysical survey protocol for municipal solid waste landfills investigation and monitoring. The landfill of Savoia di Lucania has been built with a reinforced concrete material and coated with a high-density polyethylene (HDPE) liner. Three electrical resistivity tomographies (ERT), two self-potential (SP) map surveys and one induced polarization (IP) section have been performed, both in the surrounding area and inside the waste landfill. The geophysical investigations have well defined some buried boundaries of the landfill basin and localized the leachate accumulation zones inside the dumpsite. Comparison of our results with other engineering and geological investigations could be the key for evaluating the integrity of the HDPE liner. Finally, the joint use of the ERT, IP and SP methods seems to be a promising tool for studying and designing new monitoring systems able to perform a time-lapse analysis of waste landfill geometry and integrity.     

Crustal structure of the Ruby Mountains and southern Carlin Trend region, Nevada, from magnetotelluric data

We have collected about 150 magnetotelluric (MT) soundings in northeastern Nevada in the region of the Ruby Mountains metamorphic core complex uplift and southern Carlin mineral trend, in an effort to illuminate controls on core complex evolution and deposition of world-class gold deposits. The region has experienced a broad range of tectonic events including several periods of compressional and extensional deformation, which have contributed to the total expression of electrical resistivity. Most of the soundings reside in three east–west profiles across increasing degrees of core uplift to the north (Bald Mountain, Harrison Pass, and Secret Pass latitudes). One short cross-line was also taken to assess an east–west structure to the north of the northern profile. Model resistivity cross-sections were derived from the MT data using a 2-D inversion algorithm, which damps departures of model parameters from an a priori structure. Geological interpretation of the resistivity combines previous seismic, potential field and isotope models, structural and petrological models for regional compression and extension, and detailed structural/stratigraphic interpretations incorporating drilling for petroleum and mineral exploration. To first order, the resistivity structure is one of a moderately conductive, Phanerozoic sedimentary section fundamentally disrupted by intrusion and uplift of resistive crystalline rocks. Late Devonian and early Mississippian shales of the Pilot and Chainman Formations together form an important conductive marker sequence in the stratigraphy and show pronounced increases in conductance (conductivity–thickness product) from east to west. These increases are attributed to graphitization caused by Elko–Sevier era compressional shear deformation and possibly by intrusive heating. The resistive crystalline central massifs adjoin the host stratigraphy across crustal-scale, steeply dipping fault zones. The zones provide pathways to the lower crust for heterogeneous, upper crustal induced, electric current flow. Resistive core complex crust appears steeply bounded under the middle of the neighboring grabens and not to deepen at a shallow angle to arbitrary distances to the west. The numerous crustal breaks imaged with MT may contribute to the low effective elastic thickness (T_e) estimated regionally for the Great Basin and exemplify the mid-crustal, steeply dipping slip zones in which major earthquakes nucleate. An east–west oriented conductor in the crystalline upper crust spans the East Humboldt Range and northern Ruby Mountains. The conductor may be related to nearby graphitic metasediments, with possible alteration by middle Tertiary magmatism. Lower crustal resistivity everywhere under the profiles is low and appears quasi one-dimensional. It is consistent with a low rock porosity (<1 vol.%) containing hypersaline brines and possible water-undersaturated crustal melts, residual to the mostly Miocene regional extension. The resistivity expression of the southern Carlin Trend (CT) in the Pinon Range is not a simple lineament but rather a family of structures attributed to Eocene intrusion, stratal deformation, and alteration/graphitization. Substantial reactivation or overprinting by core complex uplift or Basin–Range extensional events seems likely. We concur with others that the Carlin Trend may result in part from overlap of the large Eocene Northeast Nevada Volcanic Field with Precambrian–Paleozoic deep-water clastic source rocks thickening abruptly to the west of the Pinon Range, and projecting to the north–northwest.     

Premelting and calcium mobility in gehlenite (Ca2Al2SiO7) and pseudowollastonite (CaSiO3)

 Premelting effects in gehlenite (Ca₂Al₂SiO₇) have been studied by Raman spectroscopy and calorimetry, and in gehlenite and pseudowollastonite (CaSiO₃) by electrical conductivity. The enthalpy of premelting of gehlenite is 17.3 kJ mol⁻¹ and represents 9% of the reported enthalpy of fusion, which is in the range of the reported fraction of other minerals. The Raman and electrical conductivity experiments at high temperatures, for gehlenite and pseudowollastonite, show that the premelting effects of both compositions are associated with enhanced dynamics of calcium atoms near the melting point. This conclusion agrees with the results obtained for other minerals like diopside, but contrasts with those found for sodium metasilicate in which the weaker bonding of sodium allows the silicate framework to distort near the melting temperature and deform in such a way to prefigure the silicate entities present in the melt. Received: 30 April 2002 / Accepted: 7 August 2002 Acknowledgements We thank Y. Linard for help with DSC measurements and two anonymous reviewers for their constructive comments. This work has been partly supported by the EU Marie-Curie fellowship contract no. HPMF-CT-1999-00329, the CNRS-Carnegie Institution of Washington program PICS no.192, and the NSF grants EAR-9614432 and EAR-9901886 to B.O.M.     

电阻率图像中的地下水和断层

目的：将电阻率层析成像应用于探测潜伏断层的研究中，本文发现了断层和地下水的一些基本电阻率分布特征，这对于工程物探意义重大，一般情况下，断层两侧具有不同的电阻率特征，但是，根据电阻率层析图像中的电阻率分布，通常难以区分断层和地下水层，这是因为两者不仅都具有低电阻率值，而且还具有非常相似的电阻率异常特征。资料和方法：运用电阻率层析图像的数据，电阻率层析图像中的断层会呈现如下特征：1）由于孔隙度的加大和地下水的存在，使得断层表现出高角度的低阻线性结构。它们既可以出现在浅部盖层中，也可以存在于深部基岩中，特别是在深部区域，它们尤为明显；2）它们还呈现出高角度的线性梯度带，在该梯度带两边的电阻率结构出现整体性的差异，通常情况下，正断层的上盘表现出低阻或／和班驳状的高阻和低阻扰动区，而下盘则为完整的高阻区，这与逆冲断层正好相反；3）与断层有关的电阻率异常区常常具有良好的大尺度水平连续性，并且可以追瞎异常区附近的精细电性结构。而地下水的电阻率特征为：1）如果没有裂隙，地表水所引起的低阻区非常浅，即使存在丰富的水源以及高孔隙度的砾岩和中粗砂。一般情况下，其底端深度不超过强风化区；2）地下水的电阻率值非常低，特别在高矿化度的地区。地下水，包括岩溶水和砂岩水，的电阻率总显示出局部水平延伸或／和面团状特征；3）地下水层的深度朝某个固定方向逐渐增加，并且其电阻率图像会随季节而变；4）一般情况下，在水下渗的地区，会出现降水漏斗，其上部为高阻，而下部为低阻，从而便形成了“Y”或“V”字型的典型结构。结果：利用上述的基本特征一般可以区分断层和地下水。结论：仅依靠电阻率层析图像，可能极难准确地区分断层和裂隙水，这是因为裂隙水不但可能具有高角度的低阻线性结构，而且在一定尺度上具有很好的水平连续性，还有，由于电阻率层析成像较差的垂直分辨率，难以精确确定断层的上端点位置，所以结合其它的物探手段如钻探和浅层地震勘探是非常必要的。     

应县木塔地基工程地质勘测与分析

对山西应县木塔环境地质进行了研究,弄清了地层年代及存在的断层;通过样品分析、标准贯入及静探等方法试验、测试,得出了塔院区塔基土的工程物理性质和力学性质、承载力;用地学层析成像技术探测了木塔的基础结构及塔院地基的分层结构。