Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

基于GIS的无人机地面监控系统的设计与实现

在分析无人机领域飞行数据特征的基础上,设计实现了一套功能较为完善的无人机地面监控系统。该系统主要完成了无人机飞行状态实时显示、航线规划和航线回放等功能模块。系统借助于G IS技术,导入矢量形式的电子地图,利用丰富的地理信息来辅助实现无人机的地面监控,在V isual C 6.0开发环境下利用基于异步方式和事件驱动方式的串口通信实现了系统与地面控制站的通信,利用地图控制文件实现了地图数据的调度,利用显示缓存实现了视图实时刷新。经过实际联调,系统运行良好,实用性较好。     

An Electronic Chart Display and Information System

This article introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the performance standards for ECDIS established by the International Maritime Organization (IMO) and International Hydrographic Organization (IHO). It also describes the key features and the important functions of ECDIS, which we developed. This system is different from the productions developed by C-map, Seven-cs, offshore, and others. It is more suitable for China Marine Safety Administration Bureau to manage the navigation marks real-time. Using this system charts were located and accessed rapidly, and displayed smoothly. This article also discusses in ECDIS application system how to dynamically access and desert charts data in a limited memory (limited computer memory and resource). We constructed a tridimensional structure to manage a large amount of charts data. Vertically, according to the scale range, all charts were divided into eight levels, and a data structure called as “Multiple Scale Quad-tree” was constructed. And horizontally, a grid (every unit has a fixed size) was given to a certain scale level. We call this data structure a “Regular Page.” We explore the implementation of such a structure on the worldwide charts management utilizing quad-trees. Then we discuss the future development of ECDIS and its application system in marine agencies in China.     

基础电子地图显示的关键技术

电子地图在走向产业化、实用化的过程中,人们越来越感到电子地图的显示所产生的问题不能被忽视。目前,对电子地图显示缺少系统的研究,特别是从理论、技术和实际应用层面相结合的研究还比较少见。因此,在分析基础电子地图显示存在问题的基础上,以地图制图理论为指导,研究了基础电子地图的显示特点,提出了基础电子地图显示研究的理论框架,并针对基础电子地图自适应变焦显示、可视化表达以及显示风格转换系统的研制等关键问题进行了探讨和实践。     

定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

嵌入式态势显示系统的设计与开发

嵌入式态势显示系统在机动武器平台上具有重要的应用价值。本文在分析态势显示系统常用的三种开发模式优缺点基础上,改进并设计了一种适合VxWorks特点的开发模式,论述了系统的逻辑结构和功能部件,并以态势符号库管理、态势档案管理等功能模块为重点,介绍了系统的详细设计思想和实现方法。     

基于ArcScene的建筑物日照分析模块的设计与实现

介绍了利用ArcObjects开发、基于ArcScene的建筑物日照分析模块的研制,对各个子模块作了介绍。特别对涉及到的日照分析技术、阴影动态显示、3维建筑设计等技术做了详细的说明。最后对该模块的应用做了简要演示。     

地震前兆含义,科学问题与研究途径的研讨

地震前兆的研究已经取得了很大的进展,地震前兆的复杂性引起了广泛的关注,对地震预报、有关科学问题和探索途径的研究现状及其前景有各种评价。文章认为由于一些科学问题没有解决,尽管对中缅边境１９９５年７月连７．３级地震作出了成功预报,经验性预报有一定的局限性,文中讨论了广义地震前兆和狭义地震前兆,广义地震前兆包含二类前兆：场兆和源兆;而狭义前兆仅指后者。大陆震例前兆的系统研究证实了广义地震前兆的存在,然而