Chromosome Behavior of Heat Shock Induced Triploid in Fenneropenaeus Chinensis

INTRODUCTIONTriploidanimalsareusefulbecausetheyaresterile ,characterizedbypositivegrowthinthere productiveseason ,usefulfortesting ,forintroductionofnon nativespecies ,andforprotectionofde velopedstrains.Theinductionoftriploidyhadbeenreportedinmanyaquaculturespecies .Triploidshavebeensuccessfullyinducedinshrimpusingtemperatureshockorchemicalshock (CB ,6 DMAP)in 4species :Sicyoniaingentis (Xiangetal.,1 991 ) ,Fenneropenaeuschinensis (Xiangetal.,1 992 ;Daietal.,1 993;Baoetal.,1 993;Li…     

EFFECT OF SULPHATE-REDUCING BACTERIA ON ELECTRO-CHEMICAL CORROSION BEHAVIOR OF 16Mn STEEL IN SEA MUD

ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｗａｓｇｅｎｅｒａｌｌｙｃｏｎｓｉｄｅｒｅｄｐｒｅｖｉｏｕｓｌｙｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｏｆｓｔｅｅｌｉｎｓｅａｍｕｄｗａｓｎｏｔｓｅｒｉｏｕｓ.Ｈｏｗｅｖｅｒ,ｉｔｗａｓｌａｔｅｒｆｏｕｎｄｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒａｔｅｏｆｓｔｅｅｌｉｎｓｏｍｅｓｅａｍｕｄｗａｓｈｉｇｈｅｒｔｈａｎｔｈａｔｉｎｓｅａｗａｔｅｒ(Ｋｉｎｇ,1980;Ｓｅｈｍｉｄｅ,1982;Ｇｕｏｅｔａｌ.,1997;Ｈｏｕ,1998).Ｔｈｅｒｅａｒｅｓｏｍｅｒｅｐｏｒｔｓｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒ…     

RELAXING ASSUMPTIONS OF PERFECT INFORMATION IN PARK VISITATION MODELS*

Variables related to urban park awareness are identified and methods for relaxing assumptions of perfect information in park use models are discussed. Park awareness is related to park characteristics (age and degree of development of the park), population characteristics (race, age, length of residence, recreation participation), and distance. Park attributes are stronger predictors of both park awareness and use than is distance. These findings parallel similar research on the cognitive aspects of shopping decisions.     

Structural characterization of deep-water deposits in a foreland basin, Silla Syncline (Chilean Patagonia), with applications to depositional processes

Based on our detailed structural characterization, we examine possible relationships between thrust faults and strike-slip faults and thrust-cored folds and depositional units in the Silla Syncline, a 4 km wide fold composed of fine-grained mudstone, coarse sandstone and conglomerate deposits of the Cerro Toro Formation in the Magallanes foreland basin, Chilean Patagonia. The syncline is bounded on its western flank by an asymmetric anticline and on its eastern flank by a broad zone of thrust faults and associated folds, which are oriented sub-parallel to the syncline axis. Deposition of the coarse-grained units of the Silla Syncline appears to have taken place in this structurally defined trough controlled primarily by thrust fault related growth structures flanking the syncline.The syncline and surrounding area have also been deformed by two sets of strike-slip faults, one right-lateral and one left-lateral. The strike-slip and thrust faulting operated contemporaneously for much of their active periods, although it appears that thrust faulting, confined within the fine-grained units, initiated slightly earlier than strike-slip faulting. In addition, younger igneous intrusions at high angle to bedding generally localize along the strike-slip faults. The cross-cutting relationships among the intrusions, strike-slip faults, and flexural slip faults show that all these structures were active during the same period, which extends beyond mid-Miocene.These conclusions support the premise that structures in deep-water sediments are important for understanding not only the deformation of a foreland basin, but also its depositional architecture.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.