Assessment of chemical dispersant effectiveness in a wave tank under regular non-breaking and breaking wave conditions

Current chemical dispersant effectiveness tests for product selection are commonly performed with bench-scale testing apparatus. However, for the assessment of oil dispersant effectiveness under real sea state conditions, test protocols are required to have hydrodynamic conditions closer to the natural environment, including transport and dilution effects. To achieve this goal, Fisheries and Oceans Canada and the US Environmental Protection Agency (EPA) designed and constructed a wave tank system to study chemical dispersant effectiveness under controlled mixing energy conditions (regular non-breaking, spilling breaking, and plunging breaking waves). Quantification of oil dispersant effectiveness was based on observed changes in dispersed oil concentrations and oil-droplet size distribution. The study results quantitatively demonstrated that total dispersed oil concentration and breakup kinetics of oil droplets in the water column were strongly dependent on the presence of chemical dispersants and the influence of breaking waves. These data on the effectiveness of dispersants as a function of sea state will have significant implications in the drafting of future operational guidelines for dispersant use at sea.     

Biodegradability of dispersed crude oil at two different temperatures

Laboratory experiments were initiated to study the biodegradability of oil after dispersants were applied. Two experiments were conducted, one at 20 degrees C and the other at 5 degrees C. In both experiments, only the dispersed oil fraction was investigated. Each experiment required treatment flasks containing 3.5% artificial seawater and crude oil previously dispersed by either Corexit 9500 or JD2000 at a dispersant-to-oil ratio of 1:25. Two different concentrations of dispersed oil were prepared, the dispersed oil then transferred to shake flasks, which were inoculated with a bacterial culture and shaken on a rotary shaker at 200 rpm for several weeks. Periodically, triplicate flasks were removed and sacrificed to determine the residual oil concentration remaining at that time. Oil compositional analysis was performed by gas chromatography/mass spectrometry (GC/MS) to quantify the biodegradability. Dispersed oil biodegraded rapidly at 20 degrees C and less rapidly at 5 degrees C, in line with the hypothesis that the ultimate fate of dispersed oil in the sea is rapid loss by biodegradation.     

Lab tests on the biodegradation of chemically dispersed oil should consider the rapid dilution that occurs at sea

Most crude oils spread on open water to an average thickness as low as 0.1 mm. The application of dispersants enhances the transport of oil as small droplets into the water column, and when combined with the turbulence of 1 m waves will quickly entrain oil into the top 1 m of the water column, where it rapidly dilutes to concentrations less than 100 ppm. In less than 24 h, the dispersed oil is expected to mix into the top 10 m of the water column and be diluted to concentrations well below 10 ppm, with dilution continuing as time proceeds. Over the multiple weeks that biodegradation takes place, dispersed oil concentrations are expected to be below 1 ppm. Measurements from spills and wave basin studies support these calculations. Published laboratory studies focused on the quantification of contaminant biodegradation rates have used concentrations orders of magnitude greater than this, as it was necessary to ensure the concentrations of hydrocarbons and other chemicals were higher than the detection limits of chemical analysis. However, current analytical methods can quantify individual alkanes and PAHs (and their alkyl homologues) at ppb and ppm levels. To simulate marine biodegradation of dispersed oil at dilute concentrations commonly encountered in the field, laboratory studies should be conducted at similarly low hydrocarbon concentrations.     

Effects of chemical dispersants and mineral fines on crude oil dispersion in a wave tank under breaking waves

The interaction of chemical dispersants and suspended sediments with crude oil influences the fate and transport of oil spills in coastal waters. A wave tank study was conducted to investigate the effects of chemical dispersants and mineral fines on the dispersion of oil and the formation of oil-mineral-aggregates (OMAs) in natural seawater. Results of ultraviolet spectrofluorometry and gas chromatography flame ionized detection analysis indicated that dispersants and mineral fines, alone and in combination, enhanced the dispersion of oil into the water column. Measurements taken with a laser in situ scattering and transmissometer (LISST-100X) showed that the presence of mineral fines increased the total concentration of the suspended particles from 4 to 10microl l(-1), whereas the presence of dispersants decreased the particle size (mass mean diameter) of OMAs from 50 to 10microm. Observation with an epifluorescence microscope indicated that the presence of dispersants, mineral fines, or both in combination significantly increased the number of particles dispersed into the water.