Direct shear tests on Mexico City clay with reference to friction pile behaviour

Summary This paper presents results of static and cyclic direct shear tests performed on undisturbed and remoulded samples of Mexico City clays, including results of soil-on-interface tests. Experiments show that the static adhesion coefficient depends on the soils' liquidity index and that it diminishes due to the effect of repeated dynamic loads. Dynamic overstrength effects were not apparent, as has been observed when testing this clay in other apparatus. Interface strength in remoulded clays is initially less than half the strength of interfaces with undisturbed materials but it increases with time. At least in the materials tested in this research, it did not equal the strength of interfaces with undisturbed materials. Correction factors derived from experimental data can be used to modify the adhesion coefficient to account for dynamic and remoulding effects.     

基于直射辐射遥感图象的地物双向反射特性研究(英文)

该文讨论了一种在ＧＩＳ支持下利用直射辐射遥感图象研究地物双向反射特性的原理和方法。其主要依据是象元地面的坡度和坡向的不同，同时改变了象元地面与太阳之间、象元地面与卫星传感器之间的相对位置，并且造成了同类象元太阳直射辐射遥感分量的差异。而正是这种差异体现了该类地物双向反射特性。在ＧＩＳ的支持下利用卫星直射辐射遥感数字图象，研究卫片象元同类地物的这种差异的规律以及它们与对应坡面上的太阳位置、卫星位置的关系，便可进行该类地物的双向反射特性研究。     

一种基于WiFi Direct技术的位置信息共享方法

当移动设备处于离线状态时,设备之间难以实现基于位置的信息共享。本文尝试利用Android设备搭载的WiFi Direct技术建立无线自组织网络的方法,实现了在该网络下位置信息的共享,并对该网络的性能进行了测试,同时考虑了设备中存在有设备与服务器连接时的信息共享情况。试验表明,该方法可在一定程度上解决因网络中断,设备之间不能进行位置等信息的共享或从服务器获取信息的问题。     

基于二次场的可控源电磁法三维有限元-无限元数值模拟

本文提出了一种新的混合有限元-无限元三维可控源电磁法（CSEM）问题快速高精度正演模拟算法.首先从电场双旋度方程出发,推导了水平电偶极子源的二次场边值问题,采用无限元代替截断边界条件和有限元离散内部计算区域的新策略,达到减小计算区域的目的,基于并行直接求解技术,实现多源CSEM问题的快速精确求解.其次,通过层状解析模型测试,一方面验证了新算法的正确性,另一方面通过与其他三种已知CSEM问题求解策略进行对比,表明了本文提出的基于二次场有限元-无限元算法具有离散区域小、求解速度快和计算精度高等优点.最后,通过3D模型计算,清晰直观地模拟了场源阴影效应,为野外数据的处理与解释提供指导.

     

直流电阻率法2.5维正演的外推瀑布式多重网格法

引入外推瀑布式多重网格法(EXCMG)求解2.5维直流电阻率有限元计算形成的大型稀疏线性方程组, 结合基于地址矩阵的压缩存贮方式以及最优化离散波数, 使得2.5维电阻率正演程序的计算速度大大提高而内存需求大大减小. 研究结果表明:EXCMG法的收敛速度与网格尺寸无关,计算速度明显优于不完全Cholesky共轭梯度(ICCG)法. 并且, 随着问题规模的增大, EXCMG法的效率优势更加明显. 对1600×1600网格的2.5维电阻率法模拟问题, 正演程序仅耗时28 s, 视电阻率平均相对误差控制在0.22%以内, 为进一步研究快速反演奠定了基础.     

Direct numerical simulation of flow over a slotted cylinder at low Reynolds number

Direct numerical simulation was conducted to investigate the flow past a slotted cylinder at low Reynolds number (Re) of 100. The slotting of cylinder affects the boundary layer separation, vortex formation position, recirculation region length and wake width, which are determined by the type of slit. The streamwise slit (SS1), T-shaped slit (SS3) and Y-shaped slit (SS4) act as passive jets, while the transverse slit (SS2) achieves an alternate self-organized boundary layer suction and blowing. The flow rate in slits fluctuates over time due to the alternate vortex shedding and fluctuating pressure distribution around the cylinder surface. One fluctuation cycle of flow rate is caused by a pair of vortices shedding for SS2, SS3 and SS4, while it is created by each vortex shedding for SS1. The wall shear stress and flow impact on the slit wall partly contribute to the hydrodynamic forces acting on the slotted cylinder. Taking into account the internal wall of slit, the transverse slit plays the best role in suppressing the fluid forces with drag reduction of 1.7% and lift reduction of 17%.     

Whole mantle SH velocity model constrained by waveform inversion based on three-dimensional Born kernels

A whole mantle SH velocity model is obtained by using a unique data set and techniques. Body and surface waveforms including major and multi-orbit phases are used as a data set and are inverted by using 3-D Born kernels. The resultant model, SH18CE, reveals the different natures of the two major upwelling systems: the strong low velocity anomalies beneath Africa extend for more than 1000 km from the core–mantle boundary (CMB), whereas those beneath the Pacific are restricted to 300–400 km from the CMB. The results also show the variable natures of stagnant slabs on the 670 discontinuity around Japan: the depths of the strongest high velocity anomalies within the stagnant slabs are different region by region, which is consistent with the detailed delay time tomography model in this area.     

除砷技术现状与展望

随着除砷技术的发展,生物法和硫化法等除砷技术已应用于工业除砷,混凝法、离子交换法和直接沉淀法等除砷技术在废水除砷中也已广泛应用。在综述了近年来除砷技术在工业中和含砷废水处理上的应用后,对其中各种技术进行了分析,并对我国除砷技术的发展方向进行了展望。     

热带气旋直接降水对中国的影响研究

本文基于RSMC台风最佳路径资料以及TRMM逐日降水资料,对1998—2013年间中国区域热带气旋(TC)直接降水的时空分布特征进行了统计研究。结果表明:约54.2%的西北太平洋TC在中国陆地上产生了直接降水。TC直接降水对中国的影响范围较广,未变性TC的降水决定了全部TC降水的西界,而潜在变性TC的降水决定了全部TC降水的北界。自每年的4月开始,TC直接降水开始影响中国,以8月最为频繁,潜在变性TC的影响以9月为最。降水首日,全体TC以台风及以上强度为主,中心主要分布在30°N以南。未变性的TC强度较弱,降水面积大、降水强度强;而潜在变性TC则以台风(TY)及以上强度为主,其单个TC的平均降水面积和降水强度以热带低压(TD)及以下强度TC为最大。本文工作为TC在中国直接降水的气候特征以及TC变性前期降水分布特征提供了一些有意义的结论。