地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。     

Direct shear tests on Mexico City clay with reference to friction pile behaviour

Summary This paper presents results of static and cyclic direct shear tests performed on undisturbed and remoulded samples of Mexico City clays, including results of soil-on-interface tests. Experiments show that the static adhesion coefficient depends on the soils' liquidity index and that it diminishes due to the effect of repeated dynamic loads. Dynamic overstrength effects were not apparent, as has been observed when testing this clay in other apparatus. Interface strength in remoulded clays is initially less than half the strength of interfaces with undisturbed materials but it increases with time. At least in the materials tested in this research, it did not equal the strength of interfaces with undisturbed materials. Correction factors derived from experimental data can be used to modify the adhesion coefficient to account for dynamic and remoulding effects.     

基于直射辐射遥感图象的地物双向反射特性研究(英文)

该文讨论了一种在ＧＩＳ支持下利用直射辐射遥感图象研究地物双向反射特性的原理和方法。其主要依据是象元地面的坡度和坡向的不同，同时改变了象元地面与太阳之间、象元地面与卫星传感器之间的相对位置，并且造成了同类象元太阳直射辐射遥感分量的差异。而正是这种差异体现了该类地物双向反射特性。在ＧＩＳ的支持下利用卫星直射辐射遥感数字图象，研究卫片象元同类地物的这种差异的规律以及它们与对应坡面上的太阳位置、卫星位置的关系，便可进行该类地物的双向反射特性研究。     

Laboratory and Numerical Studies of the Convective Boundary Layer Capped by a Strong Inversion

The convective boundary layer (CBL) with a wide range of stability is simulated experimentally using a thermally stratified wind tunnel, and numerically by direct numerical simulation (DNS). The turbulence structures and flow characteristics of various CBL flows, capped by a strong temperature inversion and affected by surface shear, are investigated. The various vertical profiles of turbulence statistics similar to those from the observed CBL in the field are successfully simulated in both the wind-tunnel experiment and in DNS. The comparison of the wind-tunnel data and DNS results with those of atmospheric observations and water-tank studies shows the crucial dependence of the turbulence statistics in the upper part of the layer on the strength of the inversion layer, as well as the modification of the CBL turbulence regime by the surface shear.     

Influence of the total atmospheric optical depth and cloud cover on solar irradiance components

Broadband solar irradiance data obtained in the spectral range 400–940 nm at Kwangju, South Korea from 1999–2000 have been analyzed to investigate the effects of cloud cover and atmospheric optical depth on solar radiation components. Results from measurements indicate that the percentage of direct and diffuse horizontal components of solar irradiance depend largely on total optical depth (TOD) and cloud cover. During summer and spring, the percentages of diffuse solar irradiance relative to the global irradiance were 5.0% and 4.9% as compared to 2.2% and 3.0% during winter and autumn. The diffuse solar irradiance is higher than the direct in spring and summer by 24.2%, and 40.6%, respectively, which may largely be attributed to the attenuation (scattering) of radiation by heavy dust pollution and large cloud amount. In cloud-free conditions with cloud cover ≤2/10, the fraction of the direct and diffuse components were 66.0% and 34.0%, respectively, with a mean daily global irradiance value of 7.92±2.91 MJ m⁻² day⁻¹. However, under cloudy conditions (with cloud cover ≥8/10), the diffuse and direct fractions were 97.9% and 2.2% of the global component, respectively. The annual mean TOD under cloudless conditions (cloud cover≤2/10) yields 0.74±0.33 and increased to as much as 3.15±0.67 under cloudy conditions with cloud amount ≥8/10. An empirical formula is derived for estimating the diffuse and direct components of horizontal solar irradiance by considering the total atmospheric optical depth (TOD). Results from statistical models are shown for the estimation of solar irradiance components as a function of TOD with sufficient accuracy as indicated by low standard error for each solar zenith angle (SZA).     

起伏地形下我国太阳直接辐射空间制图

建立了起伏地形下太阳直接辐射分布式计算模型 ;成功地解决了起伏地形中地形相互遮蔽对太阳直接辐射影响的难题 ;采用数据集群技术 ,探讨了不同数据集情况下太阳直接辐射计算模式的时空有效性 ;以 1km× 1km分辨率的DEM数据作为地形的综合反映 ,完成了我国 1km× 1km分辨率各月气候平均太阳直接辐射空间分布制图     

灌溉后的黄土剪切特征变化

在中国甘肃省的黑方台阶地上从上世纪60年代开始出现人类定居和开垦活动,并自1968年发展为灌溉农业。随着灌溉的进行地面已出现沉陷和滑坡。地表沉陷是由灌溉水的充填引起黄土结构崩塌造成的。然而崩塌和湿润化对剪切特征的影响目前还不清楚。为了研究湿化后的黄土剪切特征的变化,进行了对马兰黄土未经扰动和重塑土样的直接剪切盒测试。结果显示未扰动土样的粘合力和内摩擦角在湿润化后都下降了,而所观察到的重塑土的弹度参数只有少许变化。未扰动土的不饱合粘合力,据认为其受胶结物质的影响,在饱合后消失了。经灌溉的土的不饱合强度参数与未灌溉土相比表现出差异,它们可能受土壤水分的强烈影响。     

Direct dating of folding events by 40Ar/39Ar analysis of synkinematic muscovite from flexural-slip planes

Timing of folding is usually dated indirectly, with limited isotopic dating studies reported in the literature. The present study investigated the timing of intracontinental, multi-stage folding in Upper Proterozoic sandstone, limestone, and marble near Beijing, North China, and adjacent regions. Detailed field investigations with microstructural, backscattered electron (BSE) images and electron microprobe analyses indicate that authigenic muscovite and sericite crystallized parallel to stretching lineations/striations or along thin flexural-slip surfaces, both developed during the complex deformation history of the study area, involving repeated compressional, extensional and strike-slip episodes. Muscovite/sericite separates from interlayer-slip surfaces along the limbs and from dilatant sites in the hinges of folded sandstones yield muscovite ⁴⁰Ar/³⁹Ar plateau ages of ∼158–159 Ma, whereas those from folded marble and limestone samples yield ages of 156 ± 1 Ma. Muscovite from thin flexural-slip planes on fold limbs and hinges yields ages within analytical error of ∼155–165 Ma. Further muscovite samples collected from extensionally folded limestone and strike-slip drag folds yield younger ages of 128–125 Ma with well-defined plateaus. To assess the potential influence of the detrital mica component of the host rock on the age data, two additional muscovite samples were investigated, one from a folded upper Proterozoic–Cambrian sandstone outside the Western Hills of Beijing and one from a folded sandstone sampled 20 cm from folding-related slip planes. Muscovite separates from these samples yield significantly older ages of 575 ± 2 Ma and 587 ± 2 Ma, suggesting that the timing of folding can be directly determined using the ⁴⁰Ar/³⁹Ar method. This approach enables the identification and dating of distinct deformation events that occur during multi-stage regional folding. ⁴⁰Ar/³⁹Ar dating can be used to constrain the timing of muscovite and sericite growth at moderate to low temperatures (<400 °C) during folding, yielding well-defined plateau ages and thereby the age of deformation in the upper crust.     

Direct numerical simulation of flow over a slotted cylinder at low Reynolds number

Direct numerical simulation was conducted to investigate the flow past a slotted cylinder at low Reynolds number (Re) of 100. The slotting of cylinder affects the boundary layer separation, vortex formation position, recirculation region length and wake width, which are determined by the type of slit. The streamwise slit (SS1), T-shaped slit (SS3) and Y-shaped slit (SS4) act as passive jets, while the transverse slit (SS2) achieves an alternate self-organized boundary layer suction and blowing. The flow rate in slits fluctuates over time due to the alternate vortex shedding and fluctuating pressure distribution around the cylinder surface. One fluctuation cycle of flow rate is caused by a pair of vortices shedding for SS2, SS3 and SS4, while it is created by each vortex shedding for SS1. The wall shear stress and flow impact on the slit wall partly contribute to the hydrodynamic forces acting on the slotted cylinder. Taking into account the internal wall of slit, the transverse slit plays the best role in suppressing the fluid forces with drag reduction of 1.7% and lift reduction of 17%.