五里冲水库--治理和利用喀斯特溶洞的范例

滇南蒙自五里冲水库，系充分利用盲谷地形、地下隐蔽喀斯特大厅、地下暗河等自然条件，扬长避短，通过明堵暗灌、高压灌浆、构建防渗帷募等特殊综合工程手段建造的无大坝型水库。该区地质情况复杂，喀斯特十分发育，先后投入大量钻探、平硐及基础地质调查工作量，采和合适的防漏、防渗工程。1996年竣工下闸蓄水后水位持续上升，达到设计要求，为蒙自工农业经济发展提供条件，亦为在我国南方复杂喀斯特地区构建大、中型水库闯出新路。     

Measuring the k–S–p relations on DNAPLs migration

Migration characteristics of dense non-aqueous phase liquids (DNAPLs) in the subsurface can be expressed as a water–DNAPL two-phase system based on mainly the k–S–p relations, which describe the relations among relative permeability (k), degree of water saturation (S), and capillary pressure head (p). The aims of this research are to develop an experimental system with new type of probes, such as the electrical conductivity probe for measuring the degree of water saturation and the hydrophilic and hydrophobic tensiometer for measuring the pore water and DNAPL pressures, and also to estimate the results obtained from the developed experimental system. From these tests, the excellent k–S–p relations were obtained and the efficiency and validity of this developed experimental system have been confirmed in terms of the concept of the scaling coefficient calculated by interfacial tensions.     

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.     

乌鲁木齐机场2021年首场强浓雾特征及成因分析

摘要：利用欧洲中心ERA5 0.25°×0.25°再分析、机场HTG-3微波辐射计、FY4A新一代静止气象卫星、机场跑道自动观测系统(AWOS)等多源观测资料,对2021年11月16日乌鲁木齐机场浓雾天气进行观测、诊断分析。结果表明：机场历年首场强浓雾多出现和维持在11月的早晨-午后,以辐射雾为主,持续3～4 h,此场强浓雾呈现持续时间偏长,辐射和平流兼有的特点。降水后高湿、夜间辐射作用及地面西北风增大至4～5 m·s-1时,利于机场辐射雾形成和上游辐射雾的平流;地面辐合带与强浓雾区有较好对应关系,辐合带北侧为偏北风,南侧为偏南风,当近地面逆温层建立,利于辐合带内雾体爆发性增强;近地层小高压维持静稳流场、近地层东南风层、暖平流和逆温层加强并维持、300 m以下相对湿度95%以上及地面偏北风0～2 m·s-1,利于强浓雾维持;机场升温破坏贴地逆温,地面风速加大至2～4 m·s-1,破坏地面静稳状态,地面辐合带东移至城区一带,逆温层减弱抬升至城区上空时,机场强浓雾消散。对于浓雾监测,综合使用FY4A 的10.8μm-3.75μm通道差、0.83μm、2.2μm、3.75μm能很好的显示雾区范围、雾区温度、雾区移动、雾的消散等特征,利于浓雾区的识别和预报预警。     

A field study of the coupled effects of aquifer stratification,fluid density,and groundwater fluctuations on dispersivity assessments

A number of experimental studies have tackled the issue of solute transport parameter assessments either in the laboratory or in the field. But yet, the behavior of a plume in the field under density driven forces, is not well known due to possible development of instabilities. Some field tracer tests on the fate of plumes denser than native groundwater such as those encountered under waste disposal facilities, have pointed out the processes of sinking and splitting at the early stage of migration. The process of dispersion was widely investigated, but the range of dispersivity values obtained from either experimental tests, or numerical and theoretical calculations is still very large, even for the same type of aquifers. These discrepancies were considered to be essentially caused by soil heterogeneities and scale effects. In the meantime, studies on the influence of sinking and fingering have remained more scarce. The objective of the work is to analyze how transport parameters such as dispersivities can be affected by unstable conditions, which lead to plume sinking and fingering. A series of tracer tests were carried out to study under natural conditions, the transport of a dense chloride solution injected in a shallow two-layered aquifer. Two types of experiments were performed: in the first type, source injection was such that the plume could travel downward from one layer to the other of higher pore velocity, and in the second one, the migration took place only in the faster layer. The results suggest some new insights in the processes occurring at the early stages of a dense plume migration moving in a stratified aquifer under groundwater fluctuations, which can be summarized through the following points: (i) Above a stability criterion threshold, a fingering process and a multi modal plume transport take place, but local dispersivities can be cautiously derived, using breakthrough curves matching. (ii) When water table is subject to some cycling or rising, the plume can be significantly distorted in the transverse direction, leading to unusual values of the ratio between longitudinal and transverse dispersivities. (iii) Under stable conditions, for example in the case of straightforward injection in the faster aquifer layer, longitudinal dispersivity is greater than the transverse component as usually encountered, and the obtained transport parameters are closed to macro dispersivity values, which reach their asymptotic limit at very short distances. (iv) The classical scale effect about the varying dispersivity at short distances could be a process mainly due to the distance required for a plume stabilization.     

Towards 3D map generation from digital aerial images

This paper describes the fusion of information extracted from multispectral digital aerial images for highly automatic 3D map generation. The proposed approach integrates spectral classification and 3D reconstruction techniques. The multispectral digital aerial images consist of a high resolution panchromatic channel as well as lower resolution RGB and near infrared (NIR) channels and form the basis for information extraction.Our land use classification is a 2-step approach that uses RGB and NIR images for an initial classification and the panchromatic images as well as a digital surface model (DSM) for a refined classification. The DSM is generated from the high resolution panchromatic images of a specific photo mission. Based on the aerial triangulation using area and feature-based points of interest the algorithms are able to generate a dense DSM by a dense image matching procedure. Afterwards a true ortho image for classification, panchromatic or color input images can be computed.In a last step specific layers for buildings and vegetation are generated and the classification is updated.     

He Conductivity in Cool White Dwarf Atmospheres

We investigate the conductivity of warm dense helium under conditions found in the atmospheres of cool white dwarfs using ab initio simulations. The calculations performed consist of quantum molecular dynamics simulations where the electronic wavefunction at each time step is obtained using density functional theory, while the ion trajectories are calculated using the resulting quantum mechanical forces. We use both conventional DFT (PW91) and hybrid (PBE0) functionals to calculate the conductivities that provide an estimate of the ionization fraction. While the calculations are in good agreement with the measurements for the equation of state, a significant discrepancy exists with the recently measured conductivity.     

Remnants of the amalgamation of the east and west Cathaysia blocks revealed by a short-period dense nodal array

The Cathaysia block located at the southeast South China block (SCB) is considered formed by the amalgamation of the east and west Cathaysia blocks along the Gaoyao–Huilai and Zhenghe–Dapu deep faults (here referred as GHF and ZDF, respectively). Although the extension of the ZDF to the northeast, which represents the amalgamation of the two sub-blocks has been confirmed, the development of the GHF to the southwest remains to be verified. To better constrain the detailed deep structure beneath the southwest Cathaysia, which hold great significance for revealing the evolution of the SCB, a linear seismic array with 331 nodal geophones was deployed across the Sanshui basin (SSB). Combining with the regional 10 permanent stations (PA), we obtained two profiles with teleseismic P-wave receiver function stacking. The most obvious feature in our results is the ascending Moho towards the coastal area, which is consistent with the passive margin continental and extensional tectonic setting. The stacking profile from the dense nodal array (DNA) shows that the Moho is offset beneath the transition zone of the Nanling orogeny and SSB. We deduce that this offset may be casued by the deep extension of the GHF, which represents the remnants of the amalgamation of the Cathaysia block. From the other evidences, we infer that the widespread and early erupted felsic magmas in the SSB may have resulted from lithospheric materials that were squeezed out to the surface. The relative higher Bouguer gravity and heat flow support the consolidation of magmas and the residual warm state in the shallow crustal scale beneath the SSB. The sporadic basaltic magmas in the middle SSB may have a close relation to deep extension of the GHF, which serves as a channel for upwelling hot materials.     

Fast rotation of neutron stars and equation of state of dense matter

Fast rotation of compact stars (at sub-millisecond period) and, in particular, their stability, are sensitive to the equation of state (EOS) of dense matter. Recent observations of XTE J1739-285 suggest that it contains a neutron star rotating at 1122 Hz. At such rotational frequency the effects of rotation on star’s structure are significant. We study the interplay of fast rotation, EOS, and gravitational mass of a sub-millisecond pulsar. We discuss the EOS dependence of spin-up to a sub-millisecond period, via mass accretion from a disk in a low-mass X-ray binary.     

Quick Phase Identification for Dense Seismic Array with Aid from Long Term Phase Records of Co-located Sparse Permanent Stations

The phase identification and travel time picking are critical for seismic tomography, yet it will be challenging when the numbers of stations and earthquakes are huge. We here present a method to quickly obtain P and S travel times of pre-determined earthquakes from mobile dense array with the aid from long term phase records from co-located permanent stations. The records for 1 768 M ≥ 2.0 events from 2011 to 2013 recorded by 350 ChinArray stations deployed in Yunnan Province are processed with an improved AR-AIC method utilizing cumulative envelope and rectilinearity. The reference arrivals are predicted based on phase records from 88 permanent stations with similar spatial coverage, which are further refined with AR-AIC. Totally, 718 573 P picks and 512 035 S picks are obtained from mobile stations, which are 28 and 22 times of those from permanent stations, respectively. By comparing the automatic picks with manual picks from 88 permanent stations, for M ≥ 3.0 events, 81.5% of the P-pick errors are smaller than 0.5 second and 70.5% of S-pick errors are smaller than 1 second. For events with a lower magnitude, 76.5% P-pick errors fall into 0.5 second and 69.5% S-pick errors are smaller than 1 second. Moreover, the Pn and Sn phases are easily discriminated from directly P/S, indicating the necessity of combining traditional auto picking and integrating machine learning method.