Crustal motion and deformation in Greece from a decade of GPS measurements, 1993–2003

The Hellenic plate boundary region, located in the collision zone between the Nubian/Arabian and Eurasian lithospheric plates, is one of the seismo-tectonically most active areas of Europe. During the last 15 years, GPS measurements have been used to determine the crustal motion in the area of Greece with the aim to better understand the geodynamical processes of this region. An extended reoccupation network covering whole Greece has been measured periodically in numerous GPS campaigns since the late eighties, and a continuous GPS network has been operated in the region of the Ionian Sea since 1995. In this paper, we present a new detailed high-quality solution of continuous and campaign-type measurements acquired between 1993 and 2003. During the GPS processing, a special effort was made to obtain consistent results with highest possible accuracies and reliabilities. Data of 54 mainly European IGS and EUREF sites were included in the GPS processing in order to obtain results which are internally consistent with the European kinematic field and order to allow for a regional interpretation. After an overview of the results of the IGS/EUREF sites, the results from more than 80 stations in Greece are presented in terms of velocities, time series, trajectories and strain rates. Previous geodetic, geological and seismological findings are generally confirmed and substantially refined. New important results include the observation of deformation zones to the north and to the south of the North Aegean Trough and in the West Hellenic arc region, arc-parallel extension of about 19 mm/yr along the Hellenic arc, and compression between the Ionian islands and the Greek mainland. Due to continuous long-term observations of 4–8 years, it was possible to extract height changes from the GPS time series. In Greece, we observe a differential subsidence of the order of 2 mm/yr between the northern and central Ionian islands across the Kefalonia fault zone. The differential subsidence of the central Ionian islands with respect to the northwestern Greek mainland amounts to 4 mm/yr.     

Geochemistry and petrogenesis of the post-orogenic bimodal dyke swarms in NW Sinai, Egypt: constraints on the magmatic–tectonic processes during the late Precambrian

The study area in the northwest Sinai represents one of the most significant regions in the Egyptian basement intensely invaded by post-orogenic calc-alkaline dyke swarms. Two post-orogenic dyke swarms have been recognized in NW Sinai namely: (1) mafic dykes of basalt, basaltic andesite and andesite composition and (2) felsic dykes of dacite, rhyodacite and rhyolite composition. These basaltic to rhyolitic dykes intruded contemporaneously and shortly after the intrusion of the post-orogenic leucogranite. The mafic and felsic dykes are enriched in incompatible elements, especially in the large ion lithophile elements (e.g. K, Rb, Ba) and depleted in high field strength elements with negative P, Ti and Nb anomalies. Major and trace element geochemistry indicates that investigated mafic and felsic magma types are not related via fractional crystallization. The protoliths of the mafic and felsic dykes appear to have evolved from different parental magmas. The incompatible trace element patterns favour a derivation of the mafic dykes from melting of a garnet peridotite source followed by fractional crystallization of olivine, clinopyroxene amphibole and zircon. The felsic dykes, on the other hand, could be generated by melting of garnet-free source modified subsequently by fractional crystallization of plagioclase, apatite and titanomagnetite. This implies variable source characteristics at the end of the Pan-African in the NW Sinai.The mafic and felsic dykes can be related to an intracontinental setting and that this was accompanied by a chemical evolution of the subcontinental lithosphere. Magma generation and ascent in the area was favoured by extensional movements, which is already known from other areas in NE Africa.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.     

3D numerical modelling of fluid flow in the Val-d’Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields

Fluid flow patterns have been determined using oxygen isotope isopleths in the Val-d’Or orogenic gold district. 3D numerical modelling of fluid flow and oxygen isotope exchange in the vein field shows that the fluid flow patterns can be reproduced if the lower boundary of the model is permeable, which represents middle or lower crustal rocks that are infiltrated by a metamorphic fluid generated at deeper levels. This boundary condition implies that the major crustal faults so conspicuous in vein fields do not act as the only major channel for upward fluid flow. The upper model boundary is impermeable except along the trace of major crustal faults where fluids are allowed to drain out of the vein field. This upper impermeable boundary condition represents a low-permeability layer in the crust that separates the overpressured fluid from the overlying hydrostatic fluid pressure regime. We propose that the role of major crustal faults in overpressured vein fields, independent of tectonic setting, is to drain hydrothermal fluids out of the vein field along a breach across an impermeable layer higher in the crust and above the vein field. This breach is crucial to allow flow out of the vein field and accumulation of metals in the fractures, and this breach has major implications for exploration for mineral resources. We propose that tectonic events that cause episodic metamorphic dehydration create a short-lived pulse of metamorphic fluid to rise along zones of transient permeability. This results in a fluid wave that propagates upward carrying metals to the mineralized area. Earthquakes along crustal shear zones cause dilation near jogs that draw fluids and deposit metals in an interconnected network of subsidiary shear zones. Fluid flow is arrested by an impermeable barrier separating the hydrostatic and lithostatic fluid pressure regimes. Fluids flow through the evolving and interconnected network of shear zones and by advection through the rock matrix. Episodic breaches in the impermeable barrier along the crustal shear zones allow fluid flow out of the vein field.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

川滇菱形块体边界的现今地壳形变

依据川滇菱形块体边界带上所有跨断层测量资料，分析了各场地所处断裂的近期形变特征，结果表明；川滇菱形块体北段形变活动逐渐减弱，南段逐渐加强，各条断裂分别显示出不同的变形特征；菱形块体的现今水平形变以左旋走滑运动为主，垂直形变速度较低，且呈上盘抬升与下降交替出现的运动特征，部分场地的形变异常变化与其邻近的地震活动密切相关。     

塔里木西南早第三纪古地磁和地壳缩短

属于帕米尔弧山前带的乌帕尔剖面和属于南天山山前带的巴对布拉克剖面，现今的纬度差为０．５６°，但是下第三系古地磁测定结果表明其古纬度差很大．乌帕尔剖面齐姆根组上部的古纬度为８°Ｎ，而巴什布拉克剖面巴什布拉克组第５段的古纬度为３６．１°Ｎ。若考虑到当时板块的相对运移速度，估计始新世早期巴什布拉克地区的古纬度大致为３１°Ｎ，与当时乌帕尔所处位置的纬差达２３°。又根据Ｋｌｏｏｔｗｉｊｋ测得的帕米尔西北缘利什坦层的古纬度值，在始新世末期．包括乌帕尔在内的帕米尔前缘与以巴什布拉区为代表的南天山山前带之间还有至少１０°的纬度差。古地磁资料表明，始新世早期，塔里木海宽达２０００ｋｍ，此时印度板块西北端已与欧亚板块局部碰撞，至始新世末，印度板块向北推进２０°，帕米尔弧前缘与南天山山前的距离缩短到约１０００ｋｍ，原塔里木海的两侧上升为山前平原。     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.     

Crustal structure of the Lofoten–Vesterålen continental margin, off Norway

By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.     

赣南地区寒武纪高滩组碎屑锆石U-Pb年龄和Hf同位素特征及地质意义

寒武纪高滩组广泛分布于赣南武功山-雩山地区,主体为一套浅变质砂岩夹板岩的复理石建造。为分析其物源,并对源区地壳生长和构造演化提供约束,本文对采自高滩组的变长石石英杂砂岩进行了LA-ICP-MS碎屑锆石U-Pb年代学和Hf同位素研究。锆石U-Pb年龄数据显示2 500 Ma、1 100~900 Ma和900~700 Ma 3个主要年龄峰值。2 500 Ma的年龄峰值代表了新太古代末期—古元古代的古陆核生长事件。1 100~900 Ma和900~700 Ma两个峰最显著,表明Rodinia超大陆聚合裂解在华南地区的响应,为该区寒武纪地层提供了主要物源。此外,3 003 Ma锆石年龄的捕获说明,华夏地块可能存在太古宙地壳基底。Hf同位素数据表明,源区锆石结晶多为古老地壳组分部分熔融产生的岩浆。结合锆石年龄数据分析认为,华南地区存在强烈的新元古代岩浆活动,该时期岩浆活动主要是古老地壳物质的再循环。