A laboratory test of the soil chemical submodels of two models of catchment acidification

Parameters for ion exchange selectivity and aluminium hydroxide dissolution in the soil chemical submodels used in applications of the Birkenes model and of MAGIC are compared and several discrepancies identified for organic soils. A laboratory column simulation of the soil chemical submodels is proposed and applied to soils from the Loch Dee area in Galloway. Experimental results were well predicted by a simplified version of MAGIC, with ion exchange selectivity parameters similar to those used in a previous simulation of one subcatchment of Loch Dee. The aluminium hydroxide dissolution parameter used previously was found to be too low for the organic soil materials, where a value of 106 predicted the experimental results more closely. The model developed also included a simple silicate weathering reaction to release base cations into the system. It is concluded that such simple laboratory simulations are useful for independent calibration of the soil chemical submodel of catchment models.     

Fast neutral particles as probes of the extent of Io's exosphere

The spatial extent of ion cyclotron waves at Io has been interpreted as requiring a multistep acceleration and transport process: exospheric ions are accelerated outward (relative to Jupiter) due to the corotation electric field, neutralized due to charge exchange in the surrounding exosphere, and then reionized after traveling far across magnetic field lines, at which point they generate the waves. The trajectories of the particles away from Io are sensitive to the location of their initial ionization. This paper examines the spatial distributions of fast neutrals produced under varying conditions in order to provide constraints on the possible structure and nature of the Io exosphere. While a rapid onset of cyclotron waves at a specific location around Io can be modeled with a single, point-source region of ions, such as might occur over a volcano, the regional extent of the waves suggests multiple or distributed sources.     

Origin of the Nchanga copper–cobalt deposits of the Zambian Copperbelt

The Zambian Copperbelt forms the southeastern part of the 900-km-long Neoproterozoic Lufilian Arc and contains one of the world’s largest accumulations of sediment-hosted stratiform copper mineralization. The Nchanga deposit is one of the most significant ore systems in the Zambian Copperbelt and contains two major economic concentrations of copper and cobalt, hosted within the Lower Roan Group of the Katangan Supergroup. A Lower Orebody (copper only) and Upper Orebody (copper and cobalt) occur towards the top of arkosic units and within the base of overlying shales. The sulfide mineralogy includes pyrite, bornite, chalcopyrite, and chalcocite, although in the Lower Orebody, sulfide phases are partially or completely replaced by malachite and copper oxides. Carrollite is the major cobalt-bearing phase and is restricted to fault-propagation fold zones within a feldspathic arenite. Hydrothermal alteration minerals include dolomite, phlogophite, sericite, rutile, quartz, tourmaline, and chlorite. Quartz veins from the mine sequence show halite-saturated fluid inclusions, ranging from ~31 to 38 wt% equivalent NaCl, with homogenisation temperatures (Th_TOT) ranging between 140 and 180°C. Diagenetic pyrites in the lower orebody show distinct, relatively low δ ³⁴S, ranging from −1 to −17‰ whereas arenite- and shale-hosted copper and cobalt sulfides reveal distinctly different δ ³⁴S from −1 to +12‰ for the Lower Orebody and +5 to +18‰ for the Upper Orebody. There is also a clear distinction between the δ ³⁴S mean of +12.1±3.3‰ (n=65) for the Upper Orebody compared with +5.2±3.6‰ (n=23) for the Lower Orebody. The δ ¹³C of dolomites from units above the Upper Orebody give δ ¹³C values of +1.4 to +2.5‰ consistent with marine carbon. However, dolomite from the shear-zones and the alteration assemblages within the Upper Orebody show more negative δ ¹³C values: −2.9 to −4.0‰ and −5.6 to −8.3‰, respectively. Similarly, shear zone and Upper Orebody dolomites give a δ ¹⁸O of +11.7 to +16.9‰ compared to Lower Roan Dolomites, which show δ ¹⁸O of +22.4 to +23.0‰_. Two distinct structural regimes are recognized in the Nchanga area: a weakly deformed zone consisting of basement and overlying footwall siliciclastics, and a moderate to tightly folded zone of meta-sediments of the Katangan succession. The fold geometry of the Lower Roan package is controlled by internal thrust fault-propagation folds, which detach at the top of the lowermost arkose or within the base of the overlying stratigraphy and show vergence towards the NE. Faulting and folding are considered to be synchronous, as folding predominantly occurred at the tips of propagating thrust faults, with local thrust breakthrough. The data from Nchanga suggests a strong link between ore formation and the development of structures during basin inversion as part of the Lufilian Orogeny. Sulfides tend to be concentrated within arenites or coarser-grained layers within shale units, suggesting that host-rock porosity and possibly permeability played a role in ore formation. However, sulfides are also commonly orientated along, but not deformed by, a tectonic fabric or hosted within small fractures that suggest a significant role for deformation in the development of the mineralization. The ore mineralogy, hydrothermal alteration, and stable isotope data lend support to models consistent with the thermochemical reduction of a sulfate- (and metal) enriched hydrothermal fluid, at the site of mineralization. There is no evidence at Nchanga for a contribution of bacteriogenic sulfide, produced during sedimentation or early diagenesis, to the ores.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.Editorial handling: H. Frimmel     

浓硫酸钠水溶液中的离子对

不同浓度的Na2SO4水溶液的拉曼光谱显示了SO42-的四个拉曼活性带:980 cm-1处的SO42-的对称伸缩振动模式v1带,1 106 cm-1处的反对称伸缩振动模式v3带,448 cm-1处的变形振动模式v2带和617 cm-1处的变形振动模式v4带。482 cm-1处的肩膀峰是由于NaSO4-离子对的形成对448 cm-1的v2带的影响而形成的SO42-的一个新的振动峰。浓Na2SO4水溶液中,水共享离子对[Na+.H2O.SO42-]-是主要的离子对物种。随着Na2SO4水溶液浓度的增加,Na+和SO42-的相互作用增强,NaSO4-离子对所占的摩尔分数增加。     

Formation and stability of mixed Mg/Ca/phytate species in synthetic seawater media: Consequences on ligand speciation

The results of a potentiometric investigation (by ISE-H⁺, glass electrode) on the speciation of phytate ion (Phy¹²⁻) in an ionic medium simulating the major components (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻ and SO₄²⁻) of natural seawater, at different salinities and t = 25 °C, are reported. The work was particularly aimed at determining the possible formation of mixed Ca²⁺–Mg²⁺–phytate ion pairs, and to establish how including the formation of these mixed species would affect the speciation modeling in seawater media. After testing various speciation models, that considering the formation of the MgCaH₃Phy⁵⁻, MgCaH₄Phy⁴⁻, Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ species was accepted, and corresponding stability constants were determined at two salinities (S = 5, 10). A discussion is reported both on the choice of the experimental conditions and on the possibility to extend these results to those typical of real seawater. A detailed procedure is also described to demonstrate that the stability of these species is higher than that statistically predicted. As reported in literature, a parameter, namely log X, has been determined in order to quantify this extra stability for the formation of each mixed species at various salinities. For example, at S = 10, log X₁₁₃ = 2.67 and log X₁₁₄ = 1.37 for MgCaH₃Phy⁵⁻ and MgCaH₄Phy⁴⁻ (statistical value is log X_stat = 0.60), and log X₂₁₃ = 6.11 and log X₂₁₄ = 2.15 for Mg₂CaH₃Phy³⁻ and Mg₂CaH₄Phy²⁻ (log X_stat = 1.43), respectively. Results obtained also showed that the formation of these species may occur even in conditions of low salinity (i.e. low concentration of alkaline earth cations) and low pH (i.e., more protonated ligand).     

离子色谱法测定矿物包裹体中阴离子

本文介绍了用离子色谱法同时测定矿物包裹体中F~-、Cl~-、PO_4~(3-)、Br~-、NO_3~-、SO_4~(2-)6种阴离子的新方法。研究了流动相浓度对保留时间的影响以及消除负峰干扰的方法。     

离子色谱法测定岩石,土壤,水系沉积物等样品中的氯,溴,碘

本文采用碳酸钠一氧化锌烧结法分解样品,利用DIONEX2020i离子色谱仪,电导、电化学检测器,建立了一测定岩石等样品中氯、溴、碘的分析流程。实验表明,本方法选择性好,灵敏度高,检出限分别为:氯1.03×10~(-6)、溴0.012×10~(-6)、碘0.014×10~(-6)。     

Der Leitfähigkeitstest — Ein Testsystem zur Ermittlung der membrantoxischen Eigenschaften von Substanzen

The Conductivity Test — Determining the Membrane-toxic Properties of Substances A new biotest system is introduced which is specific in terms of the measured effect but not in terms of the applied organisms. The system is able to detect the effect of membrane-toxic compounds e.g. detergents, organic solvents, and radical formers. Released into the environment, these substances damage biological membranes and therefore cause ion leakage into a surrounding medium. Ion leakage is taken as a measure for membrane damage and is determined as an increase of the electrical conductivity in the medium (conductivity test). The results presented for the tensides benzalkonium chloride, LAS (linear alkylbenzenesulfonate), and APG (alkylpolyglycoside) demonstrate the capability of the conductivity test to distinguish between the differing toxicological potential of these membrane-toxic substances. In contrast to most of the conventional biotests, the endpoint of the conductivity test is independent of a specific organism. This independence is demonstrated by the results obtained with benzalkonium chloride treatment of Elodea canadensis, Lemna minor, and Salvinia natans. The conductivity test represents a versatile, easy to handle biotest system for the assessment of ecotoxicological effects caused by membrane-toxic substances.     

用离子色谱法测定金矿区水样中常规无机离子

利用DX－120离子色谱仪进行阴阳离子的精密度和准确度测定，100mg/L时相对标准偏差范围为1．00％－3．80％，回收经95．83％－105．00％；5mg／L时相对标准偏差范围为1．18％－4．57％，回收率92．40％－103．20％，完全达到实际要求。用该离子色谱仪测定甘肃阳山金矿山水样中常规无机离子，数据表明该区域水质较好，所测离子浓度都未超过饮用水标准。     

Location and quantitative analysis of OH in coesite

 The incorporation of hydrogen (deuterium) into the coesite structure was investigated at pressures from 3.1 to 7.5 GPa and temperatures of 700, 800, and 1100 °C. Hydrogen could only be incorporated into the coesite structure at pressures greater 5.0 GPa and 1100 °C . No correlation between the concentration of trace elements such as Al and B and the hydrogen content was observed based on ion probe analysis (1335 ± 16 H ppm and 17 ± 1 Al ppm at 7.5 GPa, 1100 °C). The FTIR spectra show three relatively intense bands at 3575, 3516, and 3459 cm⁻¹ (ν₁ to ν₃, respectively) and two very weak bands at 3296 and 3210 cm⁻¹ (ν₄ and ν₅, respectively). The band at 3516 cm⁻¹ is strongly asymmetric and can be resolved into two bands, 3528 (ν_2a) and 3508 (ν_2b) cm⁻¹, with nearly identical areas. Polarized infrared absorption spectra of coesite single-crystal slabs, cut parallel to (0 1 0) and (1 0 0), were collected to locate the OH dipoles in the structure and to calibrate the IR spectroscopy for quantitative analysis of OH in coesite (ɛ _{i ,tot}=190 000 ± 30 000 l mol⁻¹ _H2O cm⁻²). The polarized spectra revealed a strong pleochroism of the OH bands. High-pressure FTIR spectra at pressures up to 8 GPa were performed in a diamond-anvil cell to gain further insight into incorporation mechanism of OH in coesite. The peak positions of the ν₁, ν₂, and ν₃ bands decrease linearly with pressure. The mode Grüneisen parameters for ν₁, ν₂, and ν₃ are −0.074, −0.144 and −0.398, respectively. There is a linear increase of the pressure derivatives with band position which follows the trend proposed by Hofmeister et al. (1999). The full widths at half maximum (FWHM) of the ν₁, ν₂, and ν₃ bands increase from 35, 21, and 28 cm⁻¹ in the spectra at ambient conditions to 71, 68, and 105 in the 8 GPa spectra, respectively. On the basis of these results, a model for the incorporation of hydrogen in coesite was developed: the OH defects are introduced into the structure by the substitution Si^4+(Si2)+4O²⁻= ^[4]□^(Si2) + 4OH⁻, which gives rise to four vibrations, ν₁, ν_2a, ν_2b, and ν₃. Because the OH(D)-bearing samples do contain traces of Al and B, the bands ν₄ and ν₅ may be coupled to Al and/or B substitution. Received: 19 December 2000 / Accepted: 23 April 2001