准饱和黄土中暗穴水动力扩展响应的研究

为分析强降水过程中暗穴扩展机理,在野外调查资料的基础上,建立了准饱和黄土暗穴的扩展计算模型,概化为弹性准饱和土层中无限长圆柱形孔洞表面受水压力的动力响应问题。通过引入势函数,得到了Lap lace变换域中的应力、位移及孔隙水压力的解析表达式,并利用数值逆变换方法求得时域解,分析了降雨历时及饱和度等因子对暗穴动力响应的影响。结果表明,水动力是引起黄土暗穴扩展的主要因素,水压力作用历时对位移及应力有较大的影响,同时饱和度的细微变化对径向位移有显著影响。     

A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.     

A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation

The vertical water entry of asymmetric two-dimensional bodies with flow separation is considered. As long as there is no flow separation, linearised Wagner's theory combined with the modified Logvinovich model has been shown to provide computationally fast and reliable estimates of slamming loads during water entry. Tassin et al. [11] introduced the fictitious body continuation (FBC) concept as a way to extend the use of Wagner's model to separated flow configurations, but they only considered symmetric bodies. In the present study, we investigate the ability of the FBC concept to provide accurate estimates of slamming loads for asymmetric bodies. In this case, flow separation may not occur simultaneously on both sides of the body. During an intermediate phase, slamming loads are governed by a competition between the local drop in pressure due to partial flow separation and the ongoing expansion of the wetted area. As a first benchmark for the model, we consider the water entry of an inclined flat plate and compare the FBC estimates with the results of a nonlinear model. Then, we consider the case of a foil and compare the FBC results with computational fluid dynamics predictions. In both cases, we find that the FBC model is able to provide reliable estimates of the slamming loads.     

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of loads,motions and cavity dynamics during freefall wedges vertically entering the water surface

In this paper, theoretical models are developed and numerical methods are used to analyze the loads, motions and cavity dynamics for freefall wedges with different deadrise angles vertically entering the water surface at Froude numbers: 1 ≤ Fn < 9. The time evolutions of the penetration depth, the velocity and the acceleration are analyzed and expressed explicitly. The maximum and average accelerations are predicted. The theoretical results are compared with numerical data obtained through a single-fluid BEM model with globally satisfactory agreement. The evolution of the pressures on the impact side is investigated. Before flow separation, gravity and the acceleration of the wedge have negligible influence on the pressure on the impact side for large Froude numbers or small deadrise angles; with increasing the deadrise angle or decreasing Froude number, the effects of gravity and the acceleration of the wedge tend to become more important. Global loads, with the main emphasis on the drag coefficient, are also studied. It is found that for the light wedge, the transient drag coefficient has slow variation in the first half of the collapse stage and rapid variation in the last half of the collapse stage. For the heavy wedge, the transient drag coefficients vary slowly during the whole collapse stage and can be treated as constant. The characteristics of the transient cavity during its formation are investigated. The non-dimensional pinch-off time, pinch-off depth and submergence depth at pinch-off scale roughly linearly as the Froude number.     

A model of secondary upwelling over the shelf break

Motivated by our puzzling high-resolution radar observations of surface vortices in the nearly rectangular Gulf of Eilat/Aqaba, northern Red Sea, we propose and explore the driven cavity approach to this geophysical phenomenon. While the lid-driven cavity has long been considered a benchmark problem in computational fluid dynamics, its oceanographic context has not been considered. Despite the additional effects of rotation and stratification, our modeling demonstrates that when the fluid within a cavity geometrically similar to the Gulf of Eilat is driven by the external current, an interior vortex can develop as in our observations. Furthermore, the Eilat vortices appear only under relatively calm conditions, adding evidence to the intriguing possibility of their simple shear-driven origin.     

Classification of near-surface anomalies in the seismic refraction method according to the shape of the time–distance graph: A theoretical approach

Results obtained by SASW and PS-logging (in-hole) seismic techniques are compared with the relatively new ReMi (Refraction microtremor) method at a common site with a well-known soil profile: a recently constructed high-speed railway embankment. PS-logging is the most accurate technique in identifying the soil profile of the embankment followed by Re-Mi and SASW. Mean shear wave velocity estimations are also higher for PS-logging, followed by SASW and ReMi, while mean deviation is similar in each technique. The ReMi technique has provided very accurate results in the study of the embankment profile, which in addition to its high operability and its fast data processing, makes it a very convenient technique for extensive geotechnical surveys.     

http://www.sciencedirect.com/science/article/pii/S1674987112001545

The presence of natural voids and cavities in subsurface karstic limestones causes severe problem for civil engineering and environmental management.The presence of such features hinders the extension of urbanizations particularly in the new metropolitan.The eastern part of Saudi Arabia contains various types of karstic limestone,sinkholes,solution cavities and voids.In this context,geophysical methods particularly electrical resistivity technique is used as a cost-effective solution for investigating subsurface caves,voids,and shallow weathered zones.2-D electrical resistivity data sets have been acquired along seven profiles in the new urbanization at Al Hassa area.Data processing has been carried out taking into consideration the response of synthetic models,which simulates physical models of the most common karstic features in the area.The results are very useful to determine the extension of shallow weathered zones and to locate different cavities underneath them.The hard limestone bedrock can also be detected and traced along the surveyed profiles.     

空洞性肺结核的CT诊断

目的：分析空洞性肺结核的ＣＴ表现和特征,探讨ＣＴ诊断该病的可靠性。材料与方法：２１例空洞性肺结构病人均做胸部ＣＴ和胸片检查,分析ＣＴ所见并与病理、胸片对照,１０例经组织病理学证实。１１例痰检和临床证实。结果：（１）肺上叶尖后段及下叶背段为空洞性肺结核的好发部位;（２）空洞呈圆形或椭圆形,空洞外壁较光整,空洞壁常有钙化;（３）空洞所属支气管壁不规则增厚;（４）临近空洞胸膜局限性增厚;（５）空洞以外肺     

Detection of sinkholes using 2D electrical resistivity imaging

Sinkholes in dolomitic areas are notoriously difficult geophysical targets, and selecting an appropriate geophysical solution is not straightforward. Electrical resistivity imaging, or tomography (RESTOM) is well suited to mapping sinkholes because of the ability of the technique for detecting resistive features and discriminating subtle resistivity variations. RESTOM surveys were conducted at two sinkhole sites near Pretoria, South Africa. The survey areas are located in the dolomites of the Lyttelton Formation, which forms part of the Malamani Subgroup and Chuniespoort Group of the Transvaal Supergroup. The survey results suggest that RESTOM is an ideal geophysical tool to aid in the detection and monitoring of sinkholes and other subsurface cavities.