Fault zone geometry of a mature active normal fault: A potential high permeability channel (Pirgaki fault, Corinth rift, Greece)

We present results from petrophysical analysis of a normal fault zone with the aim of defining the flow pathways and their behavior during seismic and interseismic periods. Data are obtained on porosity geometry, strain structure and mineralogy of different domains of a normal fault zone in the Corinth rift. Data point out a close relationship between mineralogy of the clayey minerals, porosity network and strain structures and allow definition of a macroscopic anisotropy of the flow parameters with a strong control by microscopic ultracataclasite structures. The Pirgaki fault zone, developed within pelagic limestone, has a sharp asymmetric porosity profile, with a high porosity volume in the fault core and in the damage zone of the hanging wall. From porosity volumes and threshold measurements, a matrix permeability variation of 6 orders of magnitude could be expected between the protolith and the fault core. Modifications of this pathway during seismic and interseismic phases are depicted. Healing of cracks formed during seismic slip events occurred in the fault core zone and the porous network in the damage zone is sealed in a second step. The lens geometry of the fault core zone is associated with dissolution surfaces and open conduits where dissolved matter could move out of the fault core zone. These elementary processes are developed in particular along Riedel's structures and depend on the orientation of the strain surfaces relative to the local stress and depend also on the roughness of each surface type. P-surfaces are smooth and control shearing process. R-surfaces are rough and present two wavelengths of roughness. The long one controls localization of dissolution surfaces and conduits; the short one is characteristic of dissolution surfaces. The dissolved matter can precipitate in the open structures of the hanging wall damage zone, decreasing the connectivity of the macroscopic conduit developed within this part of the fault zone.     

Gas permeability evolution of cataclasite and fault gouge in triaxial compression and implications for changes in fault-zone permeability structure through the earthquake cycle

We report the results of permeability measurements of fault gouge and tonalitic cataclasite from the fault zone of the Median Tectonic Line, Ohshika, central Japan, carried out during triaxial compression tests. The experiments revealed marked effects of deformation on the permeability of the specimens. Permeability of fault gouge decreases rapidly by about two orders of magnitude during initial loading and continues to decrease slowly during further inelastic deformation. The drop in permeability during initial loading is much smaller for cataclasite than for gouge, followed by abrupt increase upon failure, and the overall change in permeability correlates well with change in volumetric strain, i.e., initial, nearly elastic contraction followed by dilatancy upon the initiation of inelastic deformation towards specimen failure. If cemented cataclasite suffers deformation prior to or during an earthquake, a cataclasite zone may change into a conduit for fluid flow. Fault gouge zones, however, are unlikely to switch to very permeable zones upon the initiation of fault slip. Thus, overall permeability structure of a fault may change abruptly prior to or during earthquakes and during the interseismic period. Fault gouge and cataclasite have internal angles of friction of about 36° and 45°, respectively, as is typical for brittle rocks.     

Fault plane processes and mesoscopic structure of a strong-type seismogenic fault in tonalites (Adamello batholith, Southern Alps)

The Gole Larghe Fault is an exhumed paleoseismic fault crosscutting the Adamello tonalites (Italian Southern Alps). Ambient conditions of faulting were 9–11 km in depth and 250–300 °C. In the study area the fault accommodates 1100 m of dextral strike-slip over a fault thickness of 550 m. Displacement is partitioned into three hierarchically different sets of discrete subparallel cataclastic horizons (faults_1–2–3). Fault displacement is in the range of few centimeters (faults₃) to a maximum of a few tens of meters in major faults₁. Faults_1–2 nucleated on pre-existing joints, whereas faults₃ are newly generated fractures produced during slip along faults_1–2. Each fault within the Gole Larghe Fault records the same evolution with development of indurated cataclasites precursory to pseudotachylyte production. Pseudotachylytes are usually generated at the host rock/cataclasite boundary and within cataclasites the mean clast size decreases getting closer to pseudotachylyte fault veins. Pseudotachylytes and cataclasites have a similar chemical composition which is enriched in Loss On Ignition, K, Rb, Ba, U and Fe³⁺ compared to host rock.We envision two models for the evolution of the Gole Larghe Fault. In both models synkinematic fluid–rock interaction along a fault causes fault hardening by precipitation of abundant K-feldspar+epidote (and minor chlorite) in the cataclasite matrix conducive to final production of pseudotachylyte. In the first model, induration occurs progressively by differential precipitation related to fabric evolution in cataclasites. In the second model, induration occurs abruptly dependent on the development of full connectivity within the fault network and to fluid reservoir. Whatever the model, the Gole Larghe Fault represents a strong fault, where hardening processes resulted in a low displacement/fault thickness ratio and contrast with many mature weak faults where localized repeated seismic slip along the same weak horizons yields high displacement/fault thickness ratios.     

Fault seal prediction of seismic-scale normal faults in porous sandstone: A case study from the eastern Gulf of Suez rift,Egypt

A study of normal faults in the Nubian Sandstone Sequence, from the eastern Gulf of Suez rift, has been conducted to investigate the relationship between the microstructure and petrophysical properties of cataclasites developed along seismic-scale faults (slip-surface cataclasites) and smaller displacement faults (deformation bands) found in their damage zones. The results help to quantify the uncertainty associated with predicting the fluid flow behaviour of seismic-scale faults by analysing small faults recovered from core, a common procedure in the petroleum industry. The microstructure of the cataclasites was analysed as well as their single-phase permeability and threshold pressure. Faulting occurred at a maximum burial depth of ∼1.2 km. The permeability of deformation band and slip-surface cataclasites varies over ∼1.5 orders of magnitude for a given fault. Our results suggest that the lowest measured deformation band permeabilities provide a good estimate for the arithmetic-mean permeability of the major slip-surface cataclasites. This is because the cataclastic permeability reduction is mostly established early in the deformation history. Stress at the time of faulting rather than final strain appears to be the critical factor determining fault rock permeability. For viable predictions it is important that the slip-surface cataclasites and deformation bands originate from the same host. On the other hand, a higher uncertainty is associated with threshold pressure predictions, as the arithmetic-mean slip-surface cataclasite threshold pressure exceeds the highest measured deformation band threshold pressure by at least a factor of 4.     

Clockwise 180° rotation of slip direction in a superficial nappe pile emplaced upon a high-P/T type metamorphic terrane in central Japan

Understanding the exhumation process of deep-seated material within subduction zones is important in comprehending the tectonic evolution of active margins. The deformation and slip history of superficial nappe pile emplaced upon high-P/T type metamorphic rocks can reveal the intimate relationship between deformation and transitions in paleo-stress that most likely arose from changes in the direction of plate convergence and exhumation of the metamorphic terrane. The Kinshozan–Atokura nappe pile emplaced upon the high-P/T type Sanbagawa (= Sambagawa) metamorphic rocks is the remnant of a pre-existing terrane located between paired metamorphic terranes along the Median Tectonic Line (MTL) of central Japan. Intra- and inter-nappe structures record the state of paleo-stress during metamorphism and exhumation of the Sanbagawa terrane. The following tectonic evolution of the nappes is inferred from a combined structural analysis of the basal fault of the nappes and their internal structures. The relative slip direction along the hanging wall rotated clockwise by 180°, from S to N, in association with a series of major tectonic changes from MTL-normal contraction to MTL-parallel strike-slip and finally MTL-normal extension. This clockwise rotation of the slip direction can be attributed to changes in the plate-induced regional stress state and associated exhumation of the deep-seated Sanbagawa terrane from the Late Cretaceous (Coniacian) to the Middle Miocene.     

碎裂岩系钻探取芯技术研究

本文通过对碎裂岩系岩芯采取率低及保形困难的原因分析,对传统双管单动钻具进行了挡水、岩芯拦档、钻头等构建的改良。运用改进后的钻具在碎裂岩系地层中进行试验,提出了合理的钻探工艺参数。通过将改进后的钻具及钻探工艺运用于实际工程中,从岩芯采取率及保形效果上证实了该钻探取芯技术是可行并有效的。     

Geochemistry and Ar/Ar geochronology of pseudotachylyte associated with UHP whiteschists from the Dora Maira massif, Italy

In situ UV-laser ablation ⁴⁰Ar/³⁹Ar geochronological and geochemical data, together with rock and mineral compositional data, have been determined from pseudotachylyte and surrounding mylonitic gneiss associated with the UHP whiteschists of the Dora Maira Massif, Italy. Several generations of fresh pseudotachylyte occur as irregular veins up to a few cm thick both parallel and at high angles to the foliation. Whole rock XRF data collected from representative lithologies of mylonitic gneiss are uniformly consistent with a mildly alkalic granitic protolith. Minimal compositional variation is observed between the pseudotachylyte and its surrounding mylonitic gneiss. The pseudotachylyte contains newly crystallized grains of biotite and K-feldspar in a matrix of glass with partially fused grains of quartz, zircon, apatite, and titanite. Electron microprobe analyses of the glass show significant compositional variation that is probably strongly influenced by micrometer-scale changes in mineralogy. UV-laser ablation ICP-MS traverses across the mylonitic gneiss–pseudotachylyte contact are consistent with cataclastic communition of REE carriers such as epidote, monazite, allanite, zircon, and apatite before melting as an efficient mechanism of REE homogenization in the pseudotachylyte. The ⁴⁰Ar/³⁹Ar data from one band of pseudotachylyte indicate formation at 20.1 ± 0.5 Ma, when the mylonitic gneisses were already in a near surface position. The variable effects of top-to-the-west shear deformation within outcrops of the coesite-bearing unit are reflected in localized zones of protomylonite, cataclasite, ultracataclasite, and pseudotachylyte. Preservation of several generations of pseudotachylyte suggests that seismic events may have played a significant role in triggering late unroofing of the UHP rocks. It is speculated that deeper crustal seismic events potentially played a role in the unroofing of the UHP rocks at earlier stages in their exhumation history.     

FAULT ROCKS AND ACTIVITIES OF THE KANGDING-MOXI FAULT ZONE

Mylonite,cataclasite and especially fault rocks subjected to both mylonitization and cata-clasis widely developed along the Kangding-Moxi fault zone.A mylonite zone has formed as a result of ductile shearing in early stage.In later stage brittle fracturing has occurred along this mylonite zone,accompanied by the formation of the present Kangding-Moxi fault zone.Later on,ductile shearing and multiperiods of brittle fracturing occurred along the fault zone.Differential stress magnitude d     

龙门山断裂带大地震孕震环境的岩石磁学证据

地震断裂带的孕震环境对于研究地震的发生至关重要.本文以汶川地震断裂带科学钻探2号（WFSD-2）钻孔岩心中的假玄武玻璃、碎裂岩及其围岩为研究对象,通过岩石磁学测试,并结合显微结构观察探讨龙门山断裂带大地震的孕震环境.WFSD-2岩心碎裂岩中的假玄武玻璃是龙门山断裂带曾经发生过大地震活动的岩石学证据,假玄武玻璃具有高磁化率特征,而碎裂岩的磁化率值与围岩相似,假玄武玻璃中的新生磁铁矿是其高磁化率值异常的重要原因之一.假玄武玻璃中较少量的新生磁铁矿暗示了假玄武玻璃的生成环境为含氧量较低的高温还原环境.大地震断裂的摩擦热是改变龙门山断裂带中假玄武玻璃岩石磁学特征的主导因素,流体作用较弱.无高磁化率异常的碎裂岩经历的温度小于300℃,推测假玄武玻璃的生成深度较深.WFSD-2岩心中20余层假玄武玻璃脉体证明映秀—北川断裂带是一条长期活跃的断裂带,龙门山断裂带上曾经发生了多次大地震断裂活动,这些大地震可能发生在深度较大、流体作用较弱的还原性孕震环境中.     

Fabrication of synthetic calcite–muscovite rocks with variable texture — An analogue to cataclasite fabrics?

A series of large diameter calcite–muscovite aggregates has been prepared from calcite and muscovite powders, in order to gain a better understanding of how texture develops in impure carbonate rocks. The development of the microstructure and the crystallographic preferred orientation (CPO, texture) during the preparation process is described. The synthetic rocks have been fabricated from powders of calcite and muscovite by uniaxial cold-pressing at loads up to 400 MPa and subsequent hot isostatic pressing (HIPping) at pressures of 150 to 170 MPa and a temperature of 670 °C. The resulting textures and microstructures are homogeneous throughout the samples. The calcite CPO is generated by rigid body rotation and twinning during cold-pressing and is not significantly altered by recrystallization during HIPping. Grain growth during HIPping is observed in pure calcite samples, but is inhibited through high porosity and the presence of muscovite in the mixed aggregates. The preferred orientation of the calcite c-axes is found to increase with increasing uniaxial cold pressure, and to be independent of the muscovite content. The magnetic bulk susceptibility of the starting material has been changed by the formation of ferromagnetic impurities during fabrication. Comparison of the samples to natural calcite fabrics from fault zones show the potential of the experiments and fabric analyses presented to analyze and to better understand the deformation mechanisms of fault zones.