Vorticity analysis of the Palmi shear zone mylonites: new insights for the Alpine tectonic evolution of the Calabria–Peloritani terrane (southern Italy)

New microstructural data on the mylonites from the well‐exposed Palmi shear zone (southern Calabria) are presented with the aim to shed light on both the kinematics and the geometry of the southwestern branch of the Alpine belt during Eocene. In the study area, located between the Sardinia–Corsica block and the Calabria–Peloritani terrane, previous large‐scale geodynamic reconstructions suggest the presence of strike–slip or transform fault zones dissecting the southwestern branch of the Alpine belt. However, there are no field data supporting the occurrence of these structures. This paper uses vorticity analysis technique based on the aspect ratio and the long axis orientation of rigid porphyroclasts in mylonitic marbles and mylonitic granitoids, to estimate the contribution of pure and simple shear of deformation during the movement of the Palmi shear zone. Porphyroclasts aspect ratio and orientation were measured on thin sections using image analysis. Estimates of the vorticity number, W_m, indicate that the Palmi shear zone recorded general shear with a contribution of pure shear of c. 65%. Then, the Palmi shear zone can be interpreted as a segment of a left‐lateral transpressive bend along the southern termination of the Eocene Alpine front. Copyright © 2015 John Wiley & Sons, Ltd.     

Weathering,erosion and sediment composition in a high‐gradient river,Calabria, Italy

Source rock lithology and immediate modifying processes, such as chemical weathering and mechanical erosion, are primary controls on fluvial sediment supply. Sand composition and Chemical Index of Alteration (CIA) of parent rocks, soil and fluvial sand of the Savuto River watershed, Calabria (Italy), were used to evaluate the modifications of source rocks through different sections of the basin, characterized by different geomorphic processes, in a sub‐humid Mediterranean climate. The headwaters, with gentle topography, produce a coarse‐grained sediment load derived from deeply weathered gneiss, having sand of quartzofeldspathic composition, compositionally very different from in situ degraded bedrock. Maximum estimated CIA values suggest that source rock has been affected significantly by weathering, and it testifies to a climatic threshold on the destruction of the bedrock. The mid‐course has steeper slopes and a deeply incised valley; bedrock consists of mica‐schist and phyllite with a very thin regolith, which provides large cobble to very coarse sand sediments to the main channel. Slope instability, with an areal incidence of over 40 per cent, largely supplies detritus to the main channel. Sand‐sized detritus of soil and fluvial sand is lithic. Estimated CIA value testifies to a significant weathering of the bedrock too, even if in this part of the drainage basin steeper slopes allow erosion to exceed chemical weathering. The lower course has a braided pattern and sediment load is coarse to medium–fine grained. The river cuts across Palaeozoic crystalline rocks and Miocene siliciclastic deposits. Sand‐sized detritus, contributed from these rocks and homogenized by transport processes, has been found in the quartzolithic distal samples. Field and laboratory evidence indicates that landscape development was the result of extensive weathering during the last postglacial temperature maximum in the headwaters, and of mass‐failure and fluvial erosional processes in the mid‐ and low course. Copyright © 2000 John Wiley & Sons, Ltd.     

Archaeoseismic evidence for a Late Roman earthquake in the Crotone area (Ionian Calabria, Southern Italy): Seismotectonic implications

The earthquakes of Calabria are among the strongest in the whole Mediterranean, and they all occurred between the disruptive sequences of 1638 and 1908 (6.7 ≤ M ≤ 7.2). Recent paleoseismological studies show that the return time of these events on their causative fault are larger than 1 ky, thus making ancient earthquakes not recognizable through ‘conventional’ historical research. On the other hand, in those areas characterized by highly erodible deposits, the identification and paleoseismic trenching of active seismogenetic faults has remained a challenge. In order to overcome these issues, we took an archaeoseismological approach for casting light on earthquake occurrence in one of these regions, i.e., the SE area of central Ionian Calabria (Marchesato region). The extensive traces of simultaneous and abrupt collapses in the Roman settlement of Capo Colonna (in the area of the sixth and fifth b.c. sanctuary of Hera Lacinia, near the town of Crotone) are evidence of a disruptive earthquake, which occurred possibly in the third century a.d. To the same event we ascribe the definitive collapse of the Hera Lacinia temple. Considering the seismotectonic framework of the region, this event could be tentatively associated with the active fault system which cuts from NW to SE the whole Sila massif and its Ionian slope, and which should be responsible for all the others known M > 6 earthquakes in the area.     

Modelling the heat pulses generated on a fault plane during coseismic slip: Inferences from the pseudotachylites of the Copanello cliffs (Calabria, Italy)

A pseudotachylite vein network crosscutting late Hercynian foliated tonalites can be observed along the Copanello cliffs (Calabria, Southern Italy). Pseudotachylites formed during the Oligocene–Miocene at intermediate crustal levels (ca. 10 km). They show variable thickness ranging from few mm up to 10 cm, as observed in injection veins branching from the fault plane. Microscopic observations indicate that pseudotachylite matrix mainly consists of plagioclase (An₄₆–An₅₈) and biotite microlites. Rounded clasts of quartz, plagioclase or of plagioclase–quartz lithic fragments are disseminated in the matrix. Intergranular, flow and spherulitic textures are commonly observed. Microstructural features are consistent with rapid crystallisation from melt. EDS analyses of rare and tiny glass veins indicated a trachyandesite or An₅₀ plagioclase melt composition.The conditions for pseudotachylite formation were reproduced by an analytical model taking into account the heat released by friction along a horizontal fault plane during a seismic event. The model is based on a three-stage rupture history that includes nucleation, propagation and stopping. In addition, by means of a numerical approach, the model reproduces cooling that follows the stopping stage.According to previous studies, the thermal perturbation induced by fault displacement is very intense. In fact, temperatures exceeding the tonalite and even An₅₀ plagioclase liquidus (1470 °C) are reproduced by small amount of slip (≤ 6 cm) in suprahydrostatic regime. On the other hand, the thermal perturbation is strongly localised and of short duration. Peak temperatures abruptly decrease at a short distance from the fault plane (typically in few millimetres). In these conditions a thin film of melt can be produced. Therefore, the presence of cm-scale pseudotachylite veins can be only explained assuming an efficient and fast melt migration towards dilatant sites, such as pull-apart structures and injections veins. Results of the model may be useful to predict the thermal disturbance produced by earthquakes of low intensity.     

Triassic metasedimentary successions across the boundary between the southern Apennines and the Calabrian Arc (northern Calabria,Italy)

The boundary area between the Apenninic fold‐and‐thrust belt and the crystalline Calabrian Arc, located around Sangineto in northern Calabria, has been investigated. New geological mapping in the Sant'Agata area has been performed on the Triassic successions traditionally attributed to the metasedimentary San Donato Unit. This, coupled with a reappraisal of the stratigraphy and tectonics of coeval successions present more to the south in the Cetraro Unit, results in a new reconstruction of the Triassic evolution of all the metasedimentary successions found in the region. Four informal stratigraphic units have been distinguished in the S. Agata area. The lowest one (Unit A) consists of well‐bedded metalimestones and bioturbated marly limestones that correlate with Ladinian–Carnian carbonates in nearby areas. A second unit (Unit B), never recognized before, contains a complex alternation of dolomites, phyllites and some meta‐arenites containing several beds of Cavernoso facies, attributed to the Carnian. They grade upward to platform and platform‐margin dolomites of Norian–Rhaetian age (Unit C) that in turn are replaced upward and laterally by a fourth unit (Unit D) consisting of well‐bedded, dark dolomites and metalimestones with marly interlayers locally found as resedimented large blocks in slope conglomerates. Unit D correlates with Rhaetian–Liassic beds in nearby areas. Several pieces of evidence of post‐metamorphic contractional tectonics, with 140°N and 30°N trends, are found together with evidence of SW‐directed extension. The siliciclastic Carnian beds of Unit B are correlated with the phyllites of Cetraro, formerly believed to be Middle Triassic; moreover, it is suggested that in the Cetraro area Unit C is almost totally replaced by Unit D. This demonstrates that the former distinction between the two tectonic units in the whole area has to be discarded. We have made a general palaeoenvironmental reconstruction which progresses laterally, during Ladinian–Carnian times, from (i) a coastal, mixed siliciclastic–carbonate–evaporitic area at Cetraro to (ii) a transitional carbonate shelf where siliciclastic input was only episodic, and finally to (iii) a bioconstructed margin which was later replaced by a steepened margin created by tectonic instability. Starting from the Norian, subsidence shifted toward the former coastal area where an intraplatform, restricted basin developed. The proposed stratigraphy corresponds closely to the Alpujarride units of the Betic Cordillera, Spain. Moreover, it is shown that strong affinities also exist, in terms of the structural framework, with the metamorphic units of Tuscany and Liguria. Copyright © 2005 John Wiley & Sons, Ltd.     

Alluvial terraces on the Ionian coast of northern Calabria, southern Italy: Implications for tectonic and sea level controls

In this paper we present the results of an integrated geomorphological, pedological and stratigraphical study carried out along the Ionian coast of northern Calabria (southern Italy). This area is characterised by the occurrence of five orders of alluvial terraces that are striking features of the landscape, where large and steep catchments debouch from the mountain front to the hilly coastal belt.Field investigations indicate that the deposits of all five terraces are suggestive of shallow gravel-bed braided streams.On the basis of the age of the Pleistocene substratum and morphostratigraphic correlation with marine terraces cropping out in the nearby areas, each order has been associated to specific marine oxygen isotope stages.Consequently, we focused on the interplay of allocyclic factors influencing stream aggradation/degradation. Soil features and other climatic proxies suggest that climate didn't play an important role with respect to tectonic and base-level changes in controlling fluvial dynamics.In particular, we recognised that during the middle Pleistocene the study area experienced a period of subaerial landscape modelling, as suggested by the thick and complex alluvial sequence of the highest terrace (T1). The onset of regional uplift marks a change in the geomorphic scenario, with tectonic and eustatically driven changes in base-level working together in causing switches in fluvial aggradational/erosional phases (T2–T5 terraces). Because of the uplift, river dissection occurred during phases of sea level fall, whereas aggradation phases occurred during periods of climate amelioration (sea level rise) just before highstands were attained.As a consequence, the stepped terraces in the study area reflect the interplay between tectonics (uplift) and sea level changes, in which terraces define episodes of relative sea level fall during the late Quaternary.     

Early-stage rifting of the Southern Tyrrhenian region: The Calabria–Sardinia breakup

The Southern Tyrrhenian Sea is an extensional basins linked to the Neogene evolution of the Calabria subduction zone located in the western Mediterranean realm where controversial kinematic and geodynamical models have been proposed. Our study provides a key to unravel timing and mode of extension of the upper plate and the breakup of Calabria from Sardinia. By combining original stratigraphic analysis of wells and seismic profiles off Calabria with a stratigraphic correlation to onshore outcrops, we re-assess the tectonic evolution that controlled the sedimentation and basement deformation of the Southern Tyrrhenian basin during Serravallian–Tortonian times. We document the tectono-stratigraphic evolution of adjacent extensional basins characterized by 3rd order depositional sequences (Ser1, Tor1 and Tor2) and different modes of extension, subsidence and opposite dipping faults. Episodic basin development is recorded by a coarsening-up and fining-up trend of the sedimentary succession and by tectonically enhanced unconformities that reflect three episodes of fault activity. We reconstruct Serravallian–Tortonian paleogeographic maps and propose a block faulting model for the evolution of the Sardinia–Calabria area. Sardinia was disconnected from Calabria through N–S normal faults forming Tyrrhenian extensional basins that formed contemporaneously to the E–W opening of the Algerian basin. Unlike published Serravallian–Tortonian reconstructions of the western Mediterranean realm, our results support a geodynamic model characterized by rapid trench retreat, trench-normal extension in the entire overriding plate and very weak coupling between plates.     

Testing a new hybrid approach to seismic hazard assessment: an application to the Calabrian Arc (Southern Italy)

We tested a new hybrid method for the evaluation of seismic hazard. A recently proposed fault segmentation and earthquake recurrence model of peninsular Italy suggests that the interval for which the local historical catalogue is complete is shorter than the mean recurrence time of individual large faults (1000 years), or at the most comparable. These new findings violate the fundamental assumption of historical probabilistic seismic hazard methods that the historical record is representative of the activity of all the seismogenic sources. The hybrid method we propose uses time-dependent modelling of the major earthquakes and catalogue-based historical probabilistic estimates for all minor events. We assume that the largest earthquakes are characteristic for individual discrete fault segments, model their probability of occurrence by a renewal process and compute the shaking associated with each of them with a simplified procedure. Then we calculate the probability of exceeding a given threshold of peak ground acceleration for specific sites as the aggregate probability of occurrence of large characteristic earthquakes and minor shocks. We apply the method to the Calabrian Arc (Southern Italy) performing the calculations for five major towns. The exposure to seismic hazard of Reggio Calabria, Catanzaro and Vibo Valentia, which locate close to recently activated large faults, decreases with respect to traditional time-independent estimates. On the contrary, an increase of seismic hazard is obtained for Castrovillari, which locates in an area where large faults displaying Holocene activity have been recently recognized but no significant earthquake is reported in the historical catalogue. Cosenza has the highest probability to experience a significant peak ground acceleration with both the new hybrid and the traditional approaches. We wish to stress that the present results should be interpreted only in terms of the differences between the new hybrid and the traditional approaches, not for their absolute values, and that they are not intended to be used for updating or modifying the current national seismic zonation.     

P–T–t path of the Hercynian low-pressure rocks from the Mandatoriccio complex (Sila Massif, Calabria, Italy): new insights for crustal evolution

The tectono‐metamorphic evolution of the Hercynian intermediate–upper crust outcropping in eastern Sila (Calabria, Italy) has been reconstructed, integrating microstructural analysis, P–T pseudosections, mineral isopleths and geochronological data. The studied rocks belong to a nearly complete crustal section that comprises granulite facies metamorphic rocks at the base and granitoids in the intermediate levels. Clockwise P–T paths have been constrained for metapelites of the basal level of the intermediate–upper crust (Umbriatico area). These rocks show noticeable porphyroblastic textures documenting the progressive change from medium‐P metamorphic assemblages (garnet‐ and staurolite‐bearing assemblages) towards low‐P/high‐T metamorphic assemblages (fibrolite‐ and cordierite‐bearing assemblages). Peak‐metamorphic conditions of ～590 °C and 0.35 GPa are estimated by integrating microstructural observations with P–T pseudosections calculated for bulk‐rock and reaction‐domain compositions. The top level of the intermediate–upper crust (Campana area) recorded only the major heating phase at low‐P (～550 °C and 0.25 GPa), as documented by the static growth of biotite spots and of cordierite and andalusite porphyroblasts in metapelites. In situ U–Th–Pb dating of monazite from schists containing low‐P/high‐T metamorphic assemblages gave a weighted mean U–Pb concordia age of 299 ± 3 Ma, which has been interpreted as the timing of peak metamorphism. In the framework of the whole Hercynian crustal section the peak of low‐P/high‐T metamorphism in the intermediate‐to‐upper crust took place concurrently with granulite facies metamorphism in the lower crust and with emplacement of the granitoids in the intermediate levels. In addition, decompression is a distinctive trait of the P–T evolution both in the lower and upper crust. It is proposed that post–collisional extension, together with exhumation, is the most suitable tectonic setting in which magmatic and metamorphic processes can be active simultaneously in different levels of the continental crust.