钱二块铀矿床采铀注液结垢趋势的理论分析与预测

用离子系数矩阵法对钱二块铀矿床地浸采铀试验注液中存在的独立离子反应进行了确定,由溶度积规则及反应平衡原理,借助Matlab编程,估算出了钱二块铀矿床地浸采铀试验注液可能会生成的沉淀物种类及数量,为防治结垢提供了一定的理论依据.     

空间尺度转换与跨尺度信息链接:区域生态水文模拟研究空间尺度转换方法综述

空间尺度转换是近年来区域生态水文研究领域的一个基本研究问题。其需要主要是源于模型的输入数据与所能提供的数据空间尺度不一致以及模型所代表的地表过程空间尺度与所观测的地表过程空间尺度不吻合。综述了目前区域生态水文模拟研究中常用的空间尺度转换研究方法,包括向上尺度转换和向下尺度转换。详细论述了2种向下尺度转换方法: 统计学经验模型和动态模型。前者是通过将GCM大尺度数据与长期的历史观测数据比较从而建立统计学相关模型, 然后利用这个统计学经验模型进行向下的空间尺度转换. 然而动态模型并不直接对GCM数据进行向下尺度的转换,而是对与GCM进行动态耦合的区域气候模型(RCM) 的输出数据进行空间尺度转换. 通常后者所获得的数据精度要比前者高,但是一个主要缺点就是并不是全球所有的研究区域都有对应的RCM。还详细论述了2种向上尺度转换方法: 统计学经验模型和斑块模型。前者是建立一个能代表小尺度信息在大尺度上分布的密度分布概率函数, 然后利用这个函数在所需的大尺度上进行积分而求得大尺度所需的信息。而后者是根据相似性最大化原则将大尺度划分为若干个可操作的小尺度斑块,然后将计算的每个小尺度斑块的信息平均化得到大尺度所需的信息。通常在计算这种斑块化的小尺度信息的时候,对每个小尺度也会采用统计学经验模型来计算代表整个斑块小尺度的信息。建议用斑块模型与统计学经验模型相集合的方法来实现向上的空间尺度转换     

GPS网络RTK的质量控制

随着科技的发展与工程应用的深入,传统RTK技术的不足也逐渐体现出来。网络RTK的出现克服了它的局限性。本文简要介绍了网络RTK的概念、工作原理、误差来源与平差、质量控制方法。     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

Displacement-length scaling relations for faults on the terrestrial planets

Displacement-length (D/L)scaling relations for normal and thrust faults from Mars, and thrust faults from Mercury, for which sufficiently accurate measurements are available, are consistently smaller than terrestrial D/L ratios by a factor of about 5, regardless of fault type (i.e. normal or thrust). We demonstrate that D/L ratios for faults scale, to first order, with planetary gravity. In particular, confining pressure modulates: (1) the magnitude of shear driving stress on the fault; (2) the shear yield strength of near-tip rock; and (3) the Young's (or shear) modulus of crustal rock. In general, all three factors decrease with gravity for the same rock type and pore-pressure state (e.g. wet conditions). Faults on planets with lower surface gravities, such as Mars and Mercury, demonstrate systematically smaller D/L ratios than faults on larger planets, such as Earth. Smaller D/L ratios of faults on Venus and the Moon are predicted by this approach, and we infer still smaller values of D/L ratio for faults on icy satellites in the outer solar system. Collection of additional displacement-length and down-dip height data from terrestrial normal, strike-slip, and thrust faults, located within fold-and-thrust belts, plate margins, and continental interiors, is required to evaluate the influence of fault shape and progressive deformation on the scaling relations for faults from Earth and elsewhere.     

Correlations in aftershock and seismicity patterns

Correlations in space and time play a fundamental role in earthquake processes. One direct manifestation of the effects of correlations is the occurrence of aftershocks due to the stress transfer in the vicinity of a main shock. Less obvious and more speculative changes in correlations may occur in the background seismicity before large earthquakes. Using statistical physics it is possible to introduce a measure of spatial correlations through a correlation length. This quantity characterizes how local fluctuations can influence the occurrence of earthquakes over distances comparable with the correlation length. In this work, the physical basis of spatial correlations of earthquakes is discussed in the context of critical phenomena and the percolation problem. The method of two-point correlation function is applied to the seismicity of California. Well defined variations in time of the correlation length are found for aftershock sequences and background seismicity. The scaling properties of our obtained distributions are analyzed with respect to changes in several scaling parameters such as lower magnitude cutoff of earthquakes, the maximum time interval between earthquakes, and the spatial size of the area considered. This scaling behavior can be described in a unified manner by utilizing the multifractal fit. Utilizing the percolation approach the time evolution of clusters of earthquakes is studied with the correlation length defined in terms of the radius of gyration of clusters. This method is applied to the seismicity of California.     

人工值守台数字化地震仪标定原理

推导了人工台数字化地震仪的分段标定公式，提出数字化记录系统的微分近似标定和拾震器阻尼衰减法标定的方法，并提供了不同短周期地震仪与数字化地震仪并行的藕合方式和标定计算公式。     

DAS24-3B数据采集系统采集控制模块的工作原理

DAS24-3B是中国科学院地质与地球物理研究所研制的宽频带地震数据采集系统。采集控制模块是该系统的重要组成部分。本文阐述了控制模块的工作原理，介绍了DAS24-3B系统的基本组成和采集器工作过程，并给出该系统如何与笔记本端应用程序界面通讯和联络的操作建议，使该系统能够在工作中发挥更大的作用。