南黄海表层沉积物天然湿容重和含水量的分布及其与粒度之间的关系

本文论述了南黄海表层沉积物天然湿容重和含水量的分布,并利用回归分析的方法讨论了容重和含水量与粒度之间的关系。结果表明,容重和含水量与粘土粒级相关性最好,容重与粘土粒级含量(相似文献   

GPS网络RTK的质量控制

随着科技的发展与工程应用的深入,传统RTK技术的不足也逐渐体现出来。网络RTK的出现克服了它的局限性。本文简要介绍了网络RTK的概念、工作原理、误差来源与平差、质量控制方法。     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

辽东栎萌生个体的地上生物量及其构件分配与生长参数的关系

选择岷江上游海拔2100-2300m地段的辽东栎萌生株个体69株，测定了每株生长参数（年龄、高度、基径、冠幅）、各器官生物量及地上总生物量，分析了各器官生物量及构件分配与生长参数的相互关系。结果表明，辽东栎萌生株构件分配的大小排序为：茎干〉枝〉皮〉叶：随径级增大。茎干、大枝生物量所占总生物量比例上升，其他器官所占比例减小。辽东栎年龄与高度呈S曲线关系，其他均表现出很好的幂指数函数关系；各构件器官生物量与生长参数大多也呈幂指数函数W=aD^h（D为基径）关系。基径为估测辽东栎萌生株地上各器官生物量及总生物量的最佳因子。     

DAS24-3B数据采集系统采集控制模块的工作原理

DAS24-3B是中国科学院地质与地球物理研究所研制的宽频带地震数据采集系统。采集控制模块是该系统的重要组成部分。本文阐述了控制模块的工作原理，介绍了DAS24-3B系统的基本组成和采集器工作过程，并给出该系统如何与笔记本端应用程序界面通讯和联络的操作建议，使该系统能够在工作中发挥更大的作用。     

A Reconnaissance Method for Delineation of Tracts for Regional-Scale Mineral-Resource Assessment Based on Geologic-Map Data

The U.S. Geological Survey (USGS) is proposing to conduct a global mineral-resource assessment using geologic maps, significant deposits, and exploration history as minimal data requirements. Using a geologic map and locations of significant pluton-related deposits, the pluton-related-deposit tract maps from the USGS national mineral-resource assessment have been reproduced with GIS-based analysis and modeling techniques. Agreement, kappa, and Jaccard's C correlation statistics between the expert USGS and calculated tract maps of 87%, 40%, and 28%, respectively, have been achieved using a combination of weights-of-evidence and weighted logistic regression methods. Between the experts' and calculated maps, the ranking of states measured by total permissive area correlates at 84%. The disagreement between the experts and calculated results can be explained primarily by tracts defined by geophysical evidence not considered in the calculations, generalization of tracts by the experts, differences in map scales, and the experts' inclusion of large tracts that are arguably not permissive. This analysis shows that tracts for regional mineral-resource assessment approximating those delineated by USGS experts can be calculated using weights of evidence and weighted logistic regression, a geologic map, and the location of significant deposits. Weights of evidence and weighted logistic regression applied to a global geologic map could provide quickly a useful reconnaissance definition of tracts for mineral assessment that is tied to the data and is reproducible.     

仁和压容应变短临异常信息的提取及映震能力分析

自1997年以来，已经在仁和压容应变台监测范围内发生了多次中等地震。应用一元线性回归分析方法对1997年4月到2001年12月底的压容应变和井孔水位资料进行分析处理，对该台1997年4月以来的异常特征和映震能力进行了分析和探讨。     

高维PP时间序列分析在地震预报中的应用

将投影寻踪(PP)与高维时间序列分析结合起来，建立了地震PP综合预测模型。并选取祁连山地区作研究区，做了未来三个月内最大震级的短期预测，经展望式检验，合格率(预测误差≤0．5或≤10％)≥80％。中根据实际需要提出建立一定震级门限(M≥4．0)的预测具有更好的效果。本预测模型还可增加自变量、维数和改变时间尺度，并运用到其他领域中。     

基于GPRS的远程气象观测数据实时采集传输系统及其应用

通过对远程自动气象站数据实时采集传输通讯方式的比较，提出基于通用分组无线业务（GPRS）的远程自动气象站数据实时采集和传输系统的技术方案，以小数据流方式，实现野外自动气象站观测数据的实时采集、传输和对观测设备运行的监控，达到节约经费，提高数据传输时效的目的，并将此系统成功地用于苏通长江公路大桥施工期气象环境监测与预警系统中。     

A GIS Analysis to Evaluate Areas Suitable for Crushed Stone Aggregate Quarries in New England,USA

Aggregate is a low unit-value mineral commodity. Costs to move aggregate from the mine site to the point of use is a large fraction of the resource cost to users. Production sites for aggregate occur where suitable source materials exist and where transportation and market conditions are favorable. The increasing demand for aggregate and the difficulty of developing and permitting new sites and of renewal of permits on existing sites of aggregate production indicates that aggregate will be supplied from sources yet to be developed or delineated in many areas. Site development and permitting for aggregate production is difficult because many land management plans and zoning actions fail to anticipate prospective source areas for aggregate in a way that is consistent with both the source rock quality and the transportation and socioeconomic factors that define the economic viability of the industry. Spatial analysis provides a method to integrate both geology and economic (transportation and marketplace) parameters in a regional model. Weights of evidence (WofE) analysis has been used to measure the spatial correlation of geologic map, transportation network, and population data with current production sites for crushed stone aggregate in the New England region of the northeastern United States. Weighted logistic regression (WLR) is used with the WofE results to rank areas in terms of their relative suitability for production of crushed stone. Spatial analysis indicates that 85% of the 106 crushed stone aggregate quarries in New England are sited within 1.6 km (1 mile) of either a principal highway or rail line in the region. Seventy-eight percent of crushed stone aggregate quarries are sited in census tracts with population densities exceeding 100 people/mile². These relations illustrate the importance of proximity to both transportation corridors and developing areas where aggregate is predominately used. Only one active crushed stone quarry is located in a census tract with a population density less than 15 people/mile², reflecting the lack of sufficient market demand in many rural areas to develop an operation there. However, since 1990, almost all new quarries have been developed in census tracts with population densities less than 200 people/mile², indicating the difficulty of permitting new quarry sites in highly populated areas. Crushed stone aggregate is produced predominately from three hard rock types that are distributed widely in New England; 28% of sites use granitic rock, 25% use carbonate rocks, and 25% use mafic rock types that are categorized as trap rock by the aggregate industry. The other crushed stone aggregate sources include a variety of fine-grained metamorphic rock types. Carbonate rocks and Jurassic basalt (the primary trap rock source) are the most prevalent source rocks on an area-weighted basis. Spatial analysis can be used on a regional scale to rank areas by their relative suitabilityfor crushed stone aggregate production based on geology, transportation, and population parameters. The results of this regional analysis can identify areas for more detailed evaluation. As transportation or population features change, the model can be revised easily to reflect these changes.