四川省房屋建筑易损性研究

研究房屋建筑易损性特征是防震减灾工作必不可少的环节之一，本文通过对多年工作的系统总结，得出四川省不同地区的房屋建筑易损性矩阵，全省房屋建筑抗震性能总体水平不高，这是造成地震灾害加重的主要原因之一，随着经济发展实力的提高，适当提高全省房屋建筑抗震设防水平可大大减轻特别是中强地震所造成的经济损失。     

Surface effects of triggered fault slip on Reykjanes Peninsula, SW Iceland

Three large earthquakes (M_w>4.5) were triggered within 5 min, 85 km west of a M_w 6.5 earthquake in the South Iceland Seismic Zone (SISZ). We report on surface effects of these triggered earthquakes, which include fresh rupture, widespread rockfall, disrupted rockslides and block slides. Field data confirm that the earthquakes occurred along N-striking right-lateral strike-slip faults. Field data also support the conclusion from modeling of InSAR data that deformation from the second triggered event was more significant than for the other two. A major hydrological effect was the draining of water through an open fissure on a lake bed, lowering the lake level by greater than 4 m. Field relationships suggest that a component of aseismic slip could have been facilitated by water draining into the fault zone.     

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes (M_w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity (M_w ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.     

Absorption of Arsenite on Several Iron （Hydro-）Oxides and Impact from Pre-processing Methods

The absorption reactions of arsenite on Fe （hydro-）oxides are studied. The three absorbent types are Fe（OH）3 gel and two Fe （hydro-）oxides, in which the Fe（OH）3 gel was dried in a microwave oven under vacuum at 80℃. It is found that pH changes from 9.71 to 10.36 in 6 minutes after the Fe （OH）3 gel was mixed with NaAsO2 solution, as the arsenite replaces the OH- in goethite and Fe（OH）3. At the 40th minute after the start of the reaction, pH decreases, which is most probably because that the monodentate surface complex of absorbed arsenite has changed into mononuclear-bidentate complex and released proton. The decline in pH values indicates not the end of the absorption but a change in the reaction type. Temperature and dissolved gas has little effect on these two types of reactions. The total absorption of arsenite increases after the absorbent is irradiated with ultrasound, which also lead to difficulty in separating the solids from solution. The absorption capacity for arsenite of Fe（OH）3 gel dried in a microwave oven under vacuum is 53.18% and 17.22% respectively better than that of Fe （OH）3 gel and gel dried at 80℃. The possible reasons are that the water molecules in the gel vibrates with high frequency under the effect of microwave irradiation, thereby producing higher porosity and improved surface activity.     

西北区域气象计量实验室综合能力比对结果分析

分析评价西北区域参加实验室比对的试验结果,及时发现问题并进行纠正,总结实施实验间比对工作的经验,提高实验室检定/校准能力和质量管理水平。参加比对的计量检定实验室分别对气压、温度、湿度、风速比对样品进行比对试验,用归一化偏差(En)进行统计分析。2011年西北区域气象计量检定的温度、湿度、气压实验室比对结果为满意,风速实验室比对结果为较满意。该次比对的实验数据客观、真实、可信,是对各参加比对实验室检定/校准能力的综合评价,较为客观地反映了各技术机构检定装置的测量能力、检定人员的技术水平以及西北区域气象计量标准装置的现状。     

珊溪水库地震台阵建设

为更好地对珊溪水库地震震群进行监测和分析,浙江省地震局自2006年开始建设珊溪水库地震台阵.介绍了该环形小孔径台阵的勘选和建设过程,并结合2次地震震群活动的监测数据,展示了该台阵对地区性地震活动监测的效果.     

区域可持续发展能力的能值与(火用)耦合分析模型构建

可持续发展能力评价方法是识别人地协同规律、支撑科学决策的重要工具和热点需求。通过文献回顾与理论分析框架构建,耦合能值及?方法,提出自组织能力指数（SO）、生态压力指数（EP）、可持续发展能力指数（SC）构成的,基于热力学理论的可持续发展能力分析模型,利用文献荟萃法筛选17个典型发达国家1985年状态值计算SO与EP阈值,划分了4个阶段。利用中美两国1985-2015年特征对比验证,结果显示：① 2005年以前中国属“低自组织能力、低生态压力”阶段,之后进入“低自组织能力、高生态压力”阶段,存在低生态效率、规模扩张驱动特征;美国一直属“高自组织能力、高生态压力”阶段,存在高生态效率驱动、经济与生态脱钩特征,与全球生态足迹网络和世界自然基金会等的研究结果一致,模型具有较好适应性和可靠性。② 模型利用“获得?量/输入能值量”表达经济社会生态效率、“经济社会?损耗量/生态系统年产?量”表达生态压力,连接了经济社会对生态基底的熵化路径,可识别区域所处可持续发展阶段、分析水平变化和驱动因素。③ 模型以人类与生态并重的视角,从深度上反映经济社会的生态效率、从广度上评价生态空间被占用比例,具有宏观规模与微观效率分析相结合的优势,是对经典方法的补充。     

"资源一号"02C卫星影像土地利用变化检测能力分析

“资源一号”02C卫星自成功发射以来,被广泛应用于土地资源、矿产资源、地质环境调查,以及国土资源、地质灾害应急监测等应用领域。“资源一号”02C卫星是一颗填补我国高分辨率遥感数据空白的卫星,是根据国土资源主体业务需求定制的第一颗国产高分辨率业务卫星。本文以吉林省和浙江省某试验区“资源一号”02C卫星数据为例,对“资源一号”02C卫星数据融合影像进行了土地利用遥感监测变化信息检测能力的方法试验。根据试验区数据变化信息提取试验结果,对“资源一号”02C卫星影像在土地利用动态遥感监测中的变化检测能力和适用性开展了试验、分析和评价工作。     

我国海洋保护地现状、问题及发展对策

随着我国海洋经济的不断发展,沿海地区的海洋环境和生态系统面临的压力不断加剧。海洋保护地作为海洋生态环境管理的有效手段,近30年来被广泛应用于海洋生物多样性和生态系统保护,取得了显著的成就和效果。文章通过对我国海洋保护地的建设情况进行系统研究,阐述了海洋保护地的发展现状和管理体制,重点剖析了海洋保护地管理和建设过程中面临的缺乏顶层设计、管理能力和管护条件弱、管理人才和资金少、空间发展不平衡等问题,在建设以国家公园为主体的自然保护地体系的新形势下,为我国海洋保护地的发展提出了健全海洋保护地管理制度体系、构建海洋保护地网络体系、加强海洋保护地管理能力建设和加强海洋保护地宣传教育等对策建议。     

Delineation of the 85°E ridge and its structure in the Mahanadi Offshore Basin,Eastern Continental Margin of India (ECMI), from seismic reflection imaging

The passive Eastern Continental Margin of India (ECMI) evolved during the break up of India and East Antarctica in the Early Cretaceous. The 85°E ridge is a prominent linear aseismic feature extending from the Afanasy Nikitin Seamounts northward to the Mahanadi basin along the ECMI. Earlier workers have interpreted the ridge to be a prominent hot spot trail. In the absence of conclusive data, the extension of the ridge towards its northern extremity below the thick Bengal Fan sediments was a matter of postulation. In the present study, interpretation of high resolution 2-D reflection data from the Mahanadi Offshore Basin, located in the northern part of the ridge, unequivocally indicates continuation of the ridge across the continent–ocean boundary into the slope and shelf tracts of the ECMI. Its morphology and internal architecture suggest a volcanic plume related origin that can be correlated with the activity of the Kerguelen hot spot in the nascent Indian Ocean. In the continental region, the plume related volcanic activity appears to have obliterated all seismic features typical of continental crust. The deeper oceanic crust, over which the hot spot plume erupted, shows the presence of linear NS aligned basement highs, corresponding with the ridge, underlain by a depressed Moho discontinuity. In the deep oceanic basin, the ridge influences the sediment dispersal pattern from the Early Cretaceous (?)/early part of Late Cretaceous times till the end of Oligocene, which is an important aspect for understanding the hydrocarbon potential of the basin.