Estimating Deep Seafloor Interface and Volume Roughness Parameters Using the Multibeam-Hydrosweep System

Utilizing a hull-mounted, multinarrow beam echosounder onboard RV Polarstern, we measured variation of acoustic backscatter with incidence angles at two different sites in the Southern Oceans (Agulhas Plateau and the Riiser Larsen Sea). We modeled the data, using a composite roughness model, including water-sediment interface roughness and sediment volume roughness parameters. The model effectively uses the near normal incidence angle backscatter to determine the seafloor interface roughness parameters employing Helmholtz-Kirchhoff theory. Beyond 20° incidence angles, an application of Rayleigh-Rice theory is made by using a necessary splicing technique (combining both of the theories at 20° incidence angle). The estimated interface and volume roughness parameters are found to be in accordance with the known area geology.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Can A Cup Anemometer `Underspeed'?

An analysis of cup-anemometer dynamics has been carried out inorder to determine whether the mean-wind velocity can have anegative bias. This would be contrary to the general belief thatcup anemometers always overspeed. Compared to prior analyses, theeffect of a possible nonlinearity of the calibration function isincluded. The conclusion is that neither longitudinal nor lateralvelocity fluctuations can contribute significantly to a negativebias. However, if a cup anemometer has an angular response thatfalls below the ideal cosine response, there will, as demonstratedin the concluding discussion, be a negative contribution from thevertical velocity fluctuations to the total bias, and thiscontribution may even outbalance the positive contributions fromthe longitudinal velocity fluctuations. Concrete evidence of suchexotic cup anemometer behaviour has not been reported in theliterature.     

塔中石炭系碎屑岩深埋藏优质储层成因探讨

塔中地区石炭系碎屑岩为一套次生－原生孔隙型深埋藏优质储层。储集岩为中细粒－细粒石英砂岩，储层形成于古地温梯度低、沉积物浅埋时间长、深埋时间短、孔隙水矿化度高及较早被油气占居的条件下，致使原生孔隙保存较好。同时，塔中地区石炭系目前刚进入８０℃－１２０℃的强溶成岩阶段，次生孔隙正在发育，距离碳酸盐岩沉淀带和后期石英次生加大带尚有较大深度，因而储层的孔渗性维持在最佳状态。     

地球运动的超非线性分析

根据超非线性速度理论，研究了地球的自转状态，得知地球自转的角速度沿半径方向有突变和减小，并由此计算了地壳相对于地核的角速度差值，算得赤道表面每年西移１．７５ｃｍ，符合已报道的观测数据。     

黄土微结构图像处理的方法

本介绍了对黄土微结构电镜图像进行图像处理的常用方法。这些方法可以去除图像噪声，提高图像的对比度，使得图像便于进行人工解译或借助软件的图像分析。     

Time-dependent, coupled, Ekman boundary layer solutions incorporating Stokes drift

Recent technological advances in current measuring devices has resulted in a large observational database related to wind-driven motions in the upper ocean mixed layer. This has served to highlight the fact that transient motions make up a substantial contribution of the resulting Ekman currents. At the same time, certain discrepancies have emerged between the observed angular deflections of the steady-state currents from the surface wind stress, both at the surface and at sub-surface depths, which cannot be reconciled using the classical Ekman model. This paper seeks to tackle these two issues.First a general analytical method is presented for solving the time dependent horizontal momentum Ekman equations. Analysis of the unsteady terms that arise from simple special cases shows how the evolution proceeds through three stages. At early times, the Coriolis acceleration is insignificant, and the current is unidirectional and deepens through downward diffusion of momentum. Later Coriolis acceleration deflects the current vectors in the upper layers, whilst downward diffusion of momentum continues to deepen the layer. Finally, once diffusion has penetrated down to the depth of the steady-state current, then the transients decay on the inertial or diffusive timescale, depending upon the boundary conditions of the particular problem.In the second half of the paper, a new steady-state model is developed that includes the effects of wind-generated waves, through the action of their Stokes drift on the planetary vorticity. Comparisons between observations and the theoretical predictions, demonstrate that inclusion of the Stokes drift is the key to reconciling the discrepancies in the angular deflections of the steady-state currents. This leads to the conclusion that Ekman layer currents are significantly influenced by the surface waves.     

议京西大台地区的燕山运动

作者研究了京西大台地区的燕山运动，初步研究表明：这里不存在强烈的挤压变形迹象和显著的角度不整合．缺乏磨拉石建造。龙门组是厚度有限的河流相沉积，九龙山组是具有弱火山活动的湖相一滨湖相沉积。在隆起带和沉降带之间侏罗系地层显著的厚度变化率、大安山一斋堂滑覆构造及其派生的髫髻山断陷盆和大量高角度滑动面理，都显示了伸展构造背景下基底断块的差异升降。髫髻山组与壳幔相互作用有关的一套火山岩显示了上述运动的深部背景。     

Shale Gas Formation and Occurrence in China: An Overview of the Current Status and Future Potential

Shale gas is one of the most promising unconventional resources both in China and abroad. It is known as a form of self-contained source-reservoir system with large and continuous dimensions. Through years of considerable exploration efforts, China has identified three large shale gas fields in the Fuling, Changning and Weiyuan areas of the Sichuan Basin, and has announced more than 540 billion m~3 of proven shale gas reserves in marine shale systems. The geological theories for shale gas development have progressed rapidly in China as well. For example, the new depositional patterns have been introduced for deciphering the paleogeography and sedimentary systems of the Wufeng shale and Longmaxi shale in the Sichuan Basin. The shale gas storage mechanism has been widely accepted as differing from conventional natural gas in that it is adsorbed on organic matter or a mineral surface or occurs as free gas trapped in pores and fractures of the shale. Significant advances in the techniques of microstructural characterization have provided new insights on how gas molecules are stored in micro- and nano-scale porous shales. Furthermore, newly-developed concepts and practices in the petroleum industry, such as hydraulic fracturing, microseismic monitoring and multiwell horizontal drilling, have made the production of this unevenly distributed but promising unconventional natural gas a reality. China has 10–36 trillion m~3 of promising shale gas among the world's whole predicted technically recoverable reserves of 206.6 trillion m~3. China is on the way to achieving its goal of an annual yield of 30–50 billion m~3 by launching more trials within shale gas projects.     

球面距离计算方法及精度比较

球面距离(角间距)计算是天文或地理学中极常用的计算之一,也是目标查找、锥形检索、交叉证认等方法的基础。数学上,通过球面几何可以直接计算出两点的距离,前人已经推导出了多个复杂程度不一的计算方法。但是由于计算机的精度有限,在进行数值计算时有舍入误差,导致公式计算结果出现偏差。对几个常用的球面距离计算公式进行了考察,测试并对比它们在不同计算环境下的精度与优缺点。此外还展示并比较了几种常用天文软件包、数据库的球面距离计算方法,以期有助于天文工作者选择适合自己当前需要的计算方法。