一种新的振幅滤波法在化磁极中的应用

本文针对低纬度地区频率域化磁极存在的问题，在频谱分析的基础上，提出了一种新的滤波方法即振幅滤波法。该方法能将低纬度地区化极磁场的频谱恢复到垂直磁化磁场的频谱，大大提高了低纬度地区化磁极的精度。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

数字水准仪标尺编码原理研究

数字水准仪的标尺编码规则直接影响其测量精度.基于现有几种数字水准仪标尺编码的特点,归纳出标尺条码的编码衡量指标:信息密度、分辨率和纠错能力.以条码的最大编码容量与单个码区长度之比值衡量其承载的信息密度;利用光学系统的点扩散函数研究条码图像的分辨率,即相邻边缘的相互影响,得出码元相邻边缘的间距相等时,影响最小的结论;用相关系数或编码所用函数本身的性质表征条码的纠错能力.依据编码指标建立一套新的标尺编码规则:以格雷码为数值码,固定宽度的码元为参考码,两者交替组合.分析表明,该种编码不但信息密度大,分辨率高,而且纠错能力强.     

基于SVG的地理信息编码与DOM交互解析实现

SVG作为新兴的基于XML的矢量图形描述规范，在很多方面与地理信息系统中的基本概念表述一致。在对地理信息进行SVG编码的基础上，利用DOM对地理信息SVG编码文档进行解析，实现了基于SVG的Web地理信息发布实例。实验表明，采用SVG技术的通用性好、矢量显示质量高、响应速度快的优点来开发地理信息的Web应用，也是顺应Web地理信息发布发展需要的。     

Effects and removal of systematic errors in crosshole georadar attenuation tomography

We have developed an algorithm that allows crosshole georadar amplitude data contaminated with systematic errors to be tomographically inverted. The effects of the errors, which may due to variable antenna-borehole coupling, the groundwater table, and 3-D heterogeneities in the vicinity of one or more boreholes, are included in a series of transmitter and receiver amplitude-correction factors. Tests with synthetic georadar sections demonstrate that the new approach is capable of producing reliable attenuation information, even when large systematic errors are present in the amplitude data. Standard inversions of crosshole georadar data acquired within a highly complex alpine rock glacier yield distorted tomograms. In contrast the new approach results in geologically useful images.     

唐山7.8级地震前地磁异常的综合分析

利用昌黎等台的磁测资料,并用多种方法进行综合分析,结果显示,在震前出现了约3个月的短期异常,这对于地震的预测预报有一定意义。     

涡流地震检波器的特性及测试方法的研究

本文介绍了涡流地震检波器的工作原理、结构及其频率响应特性--涡流检波器的输出特性在固有频率之上是按外界激励频率的平方递增。高频灵敏度随着激励频率的增加而增高有助于弥补高频信号通过地层传播时的急剧衰减,从而提高了地震勘探的分辨率。在固有频率之下,则加强了低频滤波作用。 本文还以对单自由度线性振动系统的动态分析为基础,研究了利用实验幅频特性曲线来求该系统的固有频率和阻尼系数的方法,推导出必要的计算公式。最后举出一个应用实例,并检验了这种方法的可信度。     

Offset dependent amplitudes: Fault curvature effects and dip move-out corrections

Equations have been presented previously which predict that reflector curvature can affect significantly seismic reflection amplitudes at both zero and nonzero source-receiver offsets. Here the fact that faults are generally concave-upward is used to examine the curvature effect for compaction-driven faults which the sediments have both exponential and logarithmic porosity decreases with increasing depth.The curvature effect is generally larger over upwardly concave reflectors where amplitudes can either increase with offset (exposed focus) or decrease with offset (buried focus). The magnitude of the effect depends on the ratio between the depth to the structure and the radius of curvature of the structure. A phase change of 90° also occurs at a critical offset in the case of an exposed focus concave-upward reflector, with decreasing amplitude at offsets larger than the critical value. Dip move-out (DMO) dominantly removes the amplitude variation with offset due to curvature. These results suggest that when looking for amplitude variations with offset in a fault prospect, DMO should be applied as a preprocessing step. Compaction-driven faults have an exposed focus and, for an exponential variation of porosity with depth, there is a maximum curvature effect at a depth roughly the same as the scaling depth for the porosity. Logarithmic porosity with depth variations suggest a continued increase in the curvature effect of faults with increasing depth, to a maximum amplitude increase of about 35% relative to a plane interface.