Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

A COMPARISON OF EASTERN AND WESTERN HONG KONG PHYTOPLANKTON FROM WEEKLY SAMPLES (1997-1999)

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｉｎｐｕｒｐｏｓｅｏｆｔｈｉｓｓｔｕｄｙｗａｓｔｏｄｅｔｅｒｍｉｎｅｔｈｅｍａｇｎｉｔｕｄｅａｎｄｆｒｅｑｕｅｎｃｙｏｆｈａｒｍｆｕｌｄｉａｔｏｍａｎｄｄｉｎｏｆｌａｇｅｌｌａｔｅｏｕｔｂｒｅａｋｓｉｎＨｏｎｇＫｏｎｇ’ｓｗｅｓｔｅｒｎａｎｄｅａｓｔｅｒｎｗａｔｅｒｓ (ｅ .ｇ.ＬａｍｍａＳｔｒａｉｔｓａｎｄＰｏｒｔＳｈｅｌｔｅｒｒｅｓｐｅｃｔｉｖｅｌｙ)ｆｏｒｔｈｅｐｅｒｉｏｄＪａｎｕａｒｙ 1 997ｔｏＤｅｃｅｍｂｅｒ1 999.Ｔｈｉｓｗａｓｄｏｎｅｉｎｏｒｄｅｒｔｏｄ…     

中国古生教授学会微体古生物学分会举行代表大会和学术年会

中国古生教授学会微体古生物学分会举行代表大会和学术年会中国古竽物学会微体古物学分会第五次会员代表大分暨第六次不术年会于１９９６年１月２４日到３０日在福州市召开。来自全国地质、石油、煤炭的和产、科研和大学的１００多位代表参加了这次大会和学术研讨。大会共...     

Metamorphic phase relations in orthopyroxene-bearing granitoids: implication for high-pressure metamorphism and prograde melting in the continental crust

In this work, the factors controlling the formation and preservation of high-pressure mineral assemblages in the metamorphosed orthopyroxene-bearing metagranitoids of the Sandmata Complex, Aravalli-Delhi Mobile Belt (ADMB), northwestern India have been modelled. The rocks range in composition from farsundite through quartz mangerite to opdalite, and with varying K₂O, Ca/(Ca + Na)_rock and FeO_tot + MgO contents. A two stage metamorphic evolution has been recorded in these rocks.
An early hydration event stabilized biotite with or without epidote at the expense of magmatic orthopyroxene and plagioclase. Subsequent high-pressure granulite facies metamorphism (∼15 kbar, ∼800 °C) of these hydrated rocks produced two rock types with contrasting mineralogy and textures. In the non-migmatitic metagranitoids, spectacular garnet ± K-feldspar ± quartz corona was formed around reacting biotite, plagioclase, quartz and/or pyroxene. In contrast, biotite ± epidote melting produced migmatites, containing porphyroblastic garnet incongruent solids and leucosomes.
Applying NCKFMASHTO T–M (H₂O) and P–T pseudosection modelling techniques, it is demonstrated that the differential response of these magmatic rocks to high-pressure metamorphism is primarily controlled by the scale of initial hydration. Rocks, which were pervasively hydrated, produced garnetiferous migmatites, while for limited hydration, the same metamorphism formed sub-solidus garnet-bearing coronae. Based on the sequence of mineral assemblage evolution and the mineral compositional zoning features in the two metagranitoids, a clockwise metamorphic P–T path is constrained for the high-pressure metamorphic event. The finding has major implications in formulating geodynamic model of crustal amalgamation in the ADMB.     

Nutrient transports in a Swedish estuary

Himmerfjärd is a Swedish estuary bordering on the Baltic. The estuary lacks astronomical tides and its circulation is driven by winds and freshwater runoff. Because of a tertiary sewage treatment plant located at its inner end, the estuary is becoming increasingly eutrophic. A field study was carried out for a 78-day period in late summer and early fall of 1977 to determine rates of nutrient transport and to construct nutrient budgets. Since physical parameters (current velocity, temperature, salinity, winds and water level changes) were measured more frequently than nutrients (phosphate, nitrate, nitrite and ammonium) it was necessary to develop a suitable method to calculate nutrient flux time series and net nutrient fluxes. Over the study period, Himmerfjärd imported phosphorus and exported nitrogen. Direction of nutrient fluxes and changes in flux direction were consistent with the structure of the baroclinic currents.     

STUDY ON DEVELOPMENT STRATEGY OF SHIPPING CENTERS AND TRANSPORTATION NETWORKS IN THE YELLOW SEA RIM IN THE YELLOW SEA RIM

It is very important to establish cooperative mechanism to guarantee all members to develop their e-conomies in the Yellow Sea Rim. In this paper, the development strategies ofshipplng centers and transportation networkare discussed based on economic giobalization tendency. The results argue that a united transportation network should bebuilt in order to promote the economic competition of Northeast Asia in the world. As a key component of the economiccooperation, a hierarchical shipping centers network should be established with Hong Kong, Shanghai, Pusan, Koho,and Tokyo as cores. The authorities of China, Japan, R. O. Korea and D. P. B. Korea should make more efforts tobuild a set of cooperation institutions based on raising the transportation efficiency.     

Opening angles, Lorentz factors and confinement of X-ray binary jets

We present a collation of the available data on the opening angles of jets in X-ray binaries, which in most cases are small (≲10°). Under the assumption of no confinement, we calculate the Lorentz factors required to produce such small opening angles via the transverse relativistic Doppler effect. The derived Lorentz factors, which are in most cases lower limits, are found to be large, with a mean >10, comparable to those estimated for active galactic nuclei (AGN) and much higher than the commonly assumed values for X-ray binaries of 2–5. Jet power constraints do not, in most cases, rule out such high Lorentz factors. The upper limits on the opening angles show no evidence for smaller Lorentz factors in the steady jets of Cygnus X-1 and GRS 1915+105. In those sources in which deceleration has been observed (notably  XTE J1550−564  and Cygnus X-3), some confinement of the jets must be occurring, and we briefly discuss possible confinement mechanisms. It is however possible that all the jets could be confined, in which case the requirement for high bulk Lorentz factors can be relaxed.