机载雷达高度计对海况及海面风速的测量研究

运用我国自行研制的ＺＨＧ－１型Ｘ波段机载雷达高度计于１９９５年４月１３日－４月１８日在青岛附近海域进行的海上飞行实验数据，及导出的均方根波高、有效波高、均方根波陡算法模型，得到了上述海况参数值。     

Airborne gamma-ray spectrometry to quantify chemical erosion processes

Airborne gamma-ray spectrometry data (uranium, potassium and thorium contents) reveal geochemical heterogeneities within the monolithological Hyrôme watershed (ca. 150 km²) in the Armorican massif (western France). Our observations and computations provide important constraints on the spatial distribution and the associated magnitudes of chemical erosion processes at the scale of a small watershed. Two distinct, partially preserved, weathering profiles exhibit a strong correlation between regolith evolution and airborne-derived K/Th ratios, suggesting that the variability is linked to supergene processes. Using both airborne data and laboratory measurements on rock samples, the total net export of potassium has been estimated at 422 ± 50 kg/m² and the chemical weathering rate of potassium at 17 ± 2 kg/km²/a.     

机载扫描激光地面测绘系统分析

本文根据机载扫描激光地面测绘系统的功能和要求，分析了它的工作原理，概括出该系统中扫描激光测距的特点，介绍了一种最新的机载扫描激光地面测绘系统，最后提出了几个需要继续研究的问题     

The effect of leaf-on and leaf-off forest canopy conditions on LiDAR derived estimations of forest structural diversity

Forest structural diversity metrics describing diversity in tree size and crown shape within forest stands can be used as indicators of biodiversity. These diversity metrics can be generated using airborne laser scanning (LiDAR) data to provide a rapid and cost effective alternative to ground-based inspection. Measures of tree height derived from LiDAR can be significantly affected by the canopy conditions at the time of data collection, in particular whether the canopy is under leaf-on or leaf-off conditions, but there have been no studies of the effects on structural diversity metrics. The aim of this research is to assess whether leaf-on/leaf-off changes in canopy conditions during LiDAR data collection affect the accuracy of calculated forest structural diversity metrics. We undertook a quantitative analysis of LiDAR ground detection and return height, and return height diversity from two airborne laser scanning surveys collected under leaf-on and leaf-off conditions to assess initial dataset differences. LiDAR data were then regressed against field-derived tree size diversity measurements using diversity metrics from each LiDAR dataset in isolation and, where appropriate, a mixture of the two. Models utilising leaf-off LiDAR diversity variables described DBH diversity, crown length diversity and crown width diversity more successfully than leaf-on (leaf-on models resulted in R² values of 0.66, 0.38 and 0.16, respectively, and leaf-off models 0.67, 0.37 and 0.23, respectively). When LiDAR datasets were combined into one model to describe tree height diversity and DBH diversity the models described 75% and 69% of the variance (R² of 0.75 for tree height diversity and 0.69 for DBH diversity). The results suggest that tree height diversity models derived from airborne LiDAR, collected (and where appropriate combined) under any seasonal conditions, can be used to differentiate between simple single and diverse multiple storey forest structure with confidence.     

检定场的机载激光雷达精度评价方法

为了对机载激光雷达测量精度进行科学地评价,保障数据成果质量,满足新型仪器装备计量检测的需要,该文基于空对地检定场圆形标志点,利用平均值法和最小外包圆法对机载激光雷达的平面精度和高程精度进行评价研究。结果表明:针对低空机载激光雷达可以获取高密度的地面点云,可以利用轮廓突出且特殊形状的控制点进行三维精度评价;利用平均值法和最小外包圆法均可以对机载激光雷达进行快速、有效地三维精度评价。     

第四纪盐湖型钾盐矿床的航空γ能谱异常特征及找矿模式

本文以航空γ能谱测量资料为依据，简述了与找钾有关的部分科研成果，建立了第四纪盐湖型钾盐矿床的找矿模式，进而通过对别勒滩、马海等钾盐矿例剖析，说明航空γ能潜测量在寻找第四纪盐湖型钾盐矿床方面确有明显效果。     

区域航空γ能谱场地球化学解释及预测方法的探讨

本文以“铀矿区域评价准则”为依据,试用因子分析主成分比值法,铀对钍(钾)的区域相对场法和铀成矿有利指数法,对我国YW-10和YW-10B两个测区的区域航空γ能谱场进行了地球化学解释及预测方法的研究,与已知矿区660测区从宏观上做了对比分析,并研究了γ能谱参数在走向长270km,宽50—70km空间上的分布变化规律。研究结果表明,这些方法对了解成岩时原始铀的分布及后期铀的地球化学活动规律,估计成岩、成矿阶段铀源岩可能提供的生铀量,识别铀成矿有利地区是有用的。     

Personal Sampler for Viable Airborne Microorganisms: Main Development Stages

A new personal bioaerosol sampler has been developed and verified as an efficient tool for monitoring of viable/non‐viable airborne microorganisms, including bacteria, fungi, and viruses. The operational principle of the device is based on continuous passage of an air sample through porous media submerged into a liquid layer. During motion along narrow and tortuous ways inside the porous media, the air stream is split into a large number of ultra small bubbles with the particulates are being scavenged by these bubbles and, thus, effectively trapped. The device was initially verified for monitoring of viable airborne bacteria and fungi, firstly, under controlled laboratory conditions and later in a field. It was demonstrated that bacterial recovery rates for these two groups of microorganisms were very high and the device was found to be fully feasible for such monitoring. The next step of the device investigation was performed in the laboratory on monitoring viable airborne viruses with a range of sensitivities to physical and biological stresses. As the result, the new personal sampler demonstrated a very high recovery rate even for viruses which are rather sensitive to environmental stress (Avian Influenza, SARS, Mumps, etc.). Some following field studies, undertook in a hospital and animal houses, also demonstrated an excellent performance of the new device for selective and reliable monitoring of viable airborne viruses even in environments highly contaminated by other microorganisms. This paper reviews the main development staged of the new personal bioaerosol sampler.     

MIDAS-W: a workstation-based incoherent scatter radar data acquisition system

The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower.     

Lidar遥感基本原理及其发展

介绍了航空激光扫描(Airborne laser scanning)或者Lidar遥感信息获取系统的基本原理、系统的组成、数据获取的方法及其步骤;对近数十年来应用激光扫描遥感信息获取地形表面模型方面取得的主要成果、应用现状做了简要回顾和评述;结合GIS和影像融合方法对Lidar遥感技术未来发展趋势进行了展望。