川滇地区地震(Ms≥5.0)破裂类型与前兆异常分布的关系

对川滇地区 31次 (组 ) 5 .0级以上地震与余震次数的关系进行了统计 ,结合“强地震分为走滑型地震和断错型地震”的理论 ,确定了各次 (组 )地震的破裂类型。从物理机制上对地震破裂类型与震前前兆异常分布关系进行了讨论 ,由此进一步探讨了 5 .0级以上地震震后趋势预测     

中国大陆余震活动深度分布及其流变学机制

本文研究了中国大陆１９６６年以来发生的５次大地震（Ｍｓ≥７．０）的余震活动深度与地热流的关系。研究表明，地热流较高的震源区，余震活动深度分布较浅，并且得出余震深度分布受地壳内部岩石脆性－韧性转变深度的流变学特征控制的推论。     

由多个震源机制解分析民乐Ms6.1级地震前后应力场演化

2003年10月25日在甘肃省民乐县和山丹县境内发生了Ms6．1与Ms5．8级地震，对震区200km范围、震前2年内发生的地震，及对震后部分余震矩张量反演得到它们的震源机制解，并对其进行统计分析得到该区的背景应力场及应力轴的整体特征，根据发震区地质构造背景和对平均应力场变化分析，寻求民乐地震的发震机制。     

Relocation of aftershocks, focal mechanisms and stress inversion: Implications toward the seismo-tectonics of the causative fault zone of Mw7.6 2001 Bhuj earthquake (India)

The HYPODD relocation of 1172 aftershocks, recorded on 8–17 three-component digital seismographs, delineate a distinct south dipping E–W trending aftershock zone extending up to 35 km depth, which involves a crustal volume of 40 km × 60 km × 35 km. The relocated focal depths delineate the presence of three fault segments and variation in the brittle–ductile transition depths amongst the individual faults as the earthquake foci in the both western and eastern ends are confined up to 28 km depth whilst in the central aftershock zone they are limited up to 35 km depth. The FPFIT focal mechanism solutions of 444 aftershocks (using 8–12 first motions) suggest that the focal mechanisms ranged between pure reverse and pure strike slip except some pure dip slip solutions. Stress inversion performed using the P and T axes of the selected focal mechanisms reveals an N181°E oriented maximum principal stress with a very shallow dip (= 14°). The stress inversions of different depth bins of the P and T axes of selected aftershocks suggest a heterogeneous stress regime at 0–30 km depth range with a dominant consistent N–S orientation of the P-axes over the aftershock zone, which could be attributed to the existence of varied nature and orientation of fractures and faults as revealed by the relocated aftershocks.     

Properties of the aftershocks sequences of the 2000 and 2002 earthquakes in Aksehir-Afyon graben,west-central Anatolia,Turkey

The b-value of the Gutenberg–Richter’s frequency–magnitude relation and the p-value of the modified Omori law, which describes the decay rate of aftershock activity, were investigated for more than 500 aftershocks in the Aksehir-Afyon graben (AAG) following the 15 December 2000 Sultandagi–Aksehir and the 3 February 2002 Çay–Eber and Çobanlar earthquakes. We used the Kandilli Observatory’s catalog, which contains records of aftershocks with magnitudes ≥2.5. For the Çobanlar earthquake, the estimated b-values for three aftershock sequences are in the range 0.34 ≤  b ≤ 2.85, with the exception of the one that occurred during the first hour (4.77), while the obtained p-values are in the range 0.44 ≤ p ≤ 1.77. The aftershocks of the Sultandagi earthquake have a high p-value, indicating fast decay of the aftershock activity. A regular increase of b can be observed, with b < 1.0 after 0.208 days for the Çay–Eber earthquake. A systematic and similar increase and decrease pattern exists for the b- and p-values of the Çobanlar earthquakes during the first 5 days.     

Rapid report of the 8 January 2022 ​MS 6.9 Menyuan earthquake,Qinghai, China

The M_S 6.9 Menyuan earthquake in Qinghai Province, west China is the largest earthquake by far in 2022. The earthquake occurs in a tectonically active region, with a background b-value of 0.87 within 100 ?km of the epicenter that we derived from the unified catalog produced by China Earthquake Networks Center since late 2008. Field surveys have revealed surface ruptures extending 22 ?km along strike, with a maximum ground displacement of 2.1 ?m. We construct a finite fault model with constraints from InSAR observations, which showed multiple fault segments during the Menyuan earthquake. The major slip asperity is confined within 10 ?km at depth, with the maximum slip of 3.5 ?m. Near real-time back-projection results of coseismic radiation indicate a northwest propagating rupture that lasted for ～10 ?s. Intensity estimates from the back-projection results show up to a Mercalli scale of IX near the ruptured area, consistent with instrumental measurements and the observations from the field surveys. Aftershock locations (up to January 21, 2022) exhibit two segments, extending to ～20 ?km in depth. The largest one reaches M_S 5.3, locating near the eastern end of the aftershock zone. Although the location and the approximate magnitude of the mainshock had been indicated by previous studies based on paleoearthquake records and seismic gap, as well as estimated stressing rate on faults, significant surface-breaching rupture leads to severe damage of the high-speed railway system, which poses a challenge in accurately assessing earthquake hazards and risks, and thus demands further investigations of the rupture behaviors for crustal earthquakes.     

Temporal evolution of the focal mechanism consistency of the 2021 Yangbi MS 6.4 earthquake sequence in Yunnan

Using the Cut And Paste (CAP) method, we invert the focal mechanism of 38 moderate earthquakes (M_S ≥ 3.0) recorded by Yunnan seismic network and analyze the corresponding focal mechanism consistency based on the minimum spatial rotation angle. Our results indicate that the M_S 6.4 mainshock is induced by a lateral strike slip fault (with a rake angle of ～ ?165°) and a little normal-faulting component event along a nearly vertical plane (dipping angle～ 79° and strike ～138°). Combining our results with high resolution catalog, we argue that the seismogenic fault of this earthquake sequence is a secondary fault western to the major Weixi-Qiaohou-Weishan fault. The focal mechanism evolution can be divided into three periods. During the first period, the foreshock sequence, the focal mechanism consistency is the highest (KA<36°); during the second period which is shortly after the mainshock, the focal mechanism shows strong variation with KA ranging from 8° to 110°; during the third period, the seismicity becomes weak and the focal mechanism of the earthquakes becomes more consistent than the second period (18°<KA<73°). We suggest that the KA, to some extent, represents the coherence between local tectonic stress regime and the stress state of each individual earthquake. Furthermore, high focal mechanism consistency and high linearity of seismic distribution may serve as indicators for the identification of foreshock sequence.     

Comparative Study of Changes in Stress-drop of the Jinggu MS6.6 and Ludian MS6.5 Earthquake Sequences

The earthquake stress-drop values of two sequences were accurately calculated after taking away the effects due to regional earthquake anelastic attenuation and station site response, using waveform data and seismic phase data of sequences of the Jinggu M_S6.6, and Ludian M_S6.5 earthquakes in Yunnan. These results show that the stress drop with magnitude increases within the scope of this study of magnitude. After eliminating the influence of the magnitude, the average value of stress-drop in the Jinggu sequence is higher than that of the Ludian sequence at the same magnitude range. This may be related to the stress state in different regions. In terms of the changes of time and space of stress-drop, before M_S5.8 strong aftershock, the stress-drop is "slowing down-turning up-keeping a high value" after the mainshock, meanwhile, almost all of the abnormally high stress drop value is distributed around the M_S5.8 strong aftershock, showing that the stress environment in the region was increasing after the mainshock. And after the M_S5.9 strong aftershock, stress-drop rapidly declines to a relatively stable state, meanwhile, the high value of stress-drop is distributed around the strong aftershock, showing that the regional tectonic stress gets more fully release, its stress environment begins to rapidly decrease. For the Ludian sequence without a strong aftershock occurring, the average value of stress drop is lower than that of the Jinggu earthquake sequence at the same magnitude range, while at the same time, the stress-drop of the aftershock sequence almost hasn''t changed much. In the time after the mainshock, combined with the release characteristics of the main energy, the stress in the region is excessively released, the subsequent stress in the region gradually returns to normal. This may be the reason why the activity of Ludian aftershocks significantly was weaker and subsequently there were no strong aftershocks occurred.     

匹配滤波方法研究2016年意大利中部MW6.0地震的余震迁移

2016年8月24日意大利中部发生M_W6.0地震,2个月之后,震中附近相继发生M_W5.5、M_W5.9、M_W6.5地震。研究这几次较大地震间的相互触发作用及机制十分必要,然而在大地震之后传统地震目录通常缺失很多余震事件,缺失的余震事件包含着早期余震时空分布和迁移规律的信息,为完善余震目录本文利用匹配滤波方法对M_W6.0地震后80天内的连续数据进行余震检测,得到了数十倍于模板数量的新检测事件,检测事件与模板事件组成的新余震目录完备震级为1.0,提高了地震目录的完备性。依据新余震目录进行余震时空分布研究,结果显示M_W6.0、M_W5.9、M_W6.5地震的早期余震迁移规律不同。M_W6.0地震的早期余震沿着断裂走向同时朝两侧迁移;而M_W5.9、M_W6.5地震的早期余震向南、北迁移表示出不对称的特征。通过拟合余震迁移前端发现,M_W6.0、M_W5.5地震的早期余震朝着随后较大地震的方向迁移,且较符合lgt的特征,表明余震迁移可能与慢滑动有关。     

2017年四川九寨沟MS7.0地震及余震定位研究

采用特定震源台站校正定位方法对九寨沟M_S7.0地震及其余震进行了精定位研究,结果显示九寨沟地震主震深度为19km左右,余震主要分布于5~15km深度范围;与单事件定位方法相比,其余震展布和断层的线性特征更吻合,更具有平面特征;与双差定位法相比,精定位事件覆盖范围更广。精定位结果显示,断层整体为虎牙断裂西北向的延伸,根据余震分布和特定震源区的校正项分布,认为此发震断层应分南、北两段;余震区长度为40km左右,西北段宽度为10km左右,东南段宽度为6.5km左右。