OSIRIS: AO-assisted integral-field spectroscopy at the Keck Observatory

OSIRIS (OH-Suppressing Infra-Red Integral-field Spectrograph) is a new facility instrument for the Keck Observatory. After seeing first light in February 2005, OSIRIS is currently undergoing commissioning. OSIRIS provides the capability of performing three-dimensional spectroscopy in the near-infrared z, J, H, and K bands at the resolution limit of the Keck II telescope, which is equipped with adaptive optics and a laser guide star. The science case for OSIRIS is summarized, and the instrument and associated data reduction software are described.     

Simulation of adaptive optics for the Vacuum Tower Telescope

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.     

一种基于Ohta-Okamoto签名的门限群签名方案

在修改的Ohta_Okamoto数字签名方案基础上,设计出了一个新的(t,n)门限签名方案。该方案具有可验证性和防止内部成员合谋攻击;而且验证者在验证群签名的有效性计算的复杂性与一般个人签名方案一样。该方案的安全性是基于大整数的因式分解,因此在计算上是安全的。     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Adaptive fisheries management in Vietnam: The use of indicators and the introduction of a multi-disciplinary Marine Fisheries Specialist Team to support implementation

Vietnam is in the process of introducing adaptive management based on indicators and time-series to manage its marine fisheries. The development of indicator-based frameworks for fisheries management has accelerated in recent years. This article describes the suite of indicators being suggested or used in Vietnam including the data-collection system. The Vietnamese approach is supported by an institutional structure consisting of a multi-disciplinary advisory system to facilitate the process of using indicators and to introduce knowledge-based management. The article concludes by identifying current problems and weaknesses and by providing suggestions for future improvement of the system.     

Adaptive optimal control of an autonomous underwater vehicle in the dive plane using dorsal fins

In this paper, adaptive control of low speed bio-robotic autonomous underwater vehicles (BAUVs) in the dive plane using dorsal fins is considered. It is assumed that the model parameters are completely unknown and only the depth of the vehicle is measured for feedback. Two dorsal fins are mounted in the horizontal plane on either side of the BAUV. The normal force produced by the fins, when cambered, is used for the maneuvering. The BAUV model considered here is non-minimum phase. An indirect adaptive control system is designed for the depth control using the dorsal fins. The control system consists of a gradient based identifier for online parameter estimation, an observer for state estimation, and an optimal controller. Simulation results are presented which show that the adaptive control system accomplishes precise depth control of the BAUV using dorsal fins in spite of large uncertainties in the system parameters.     

改进的自适应遗传算法在遥感图像分割中的应用

为了自动确定遥感图像分割的最佳阈值,本文提出了一种改进的自适应遗传算法,并利用该算法对二维Otsu图像阈值分割函数进行了全局优化,提高了分割闻值的求解速度。该算法能够根据个体适应度大小和群体的分散程度自动调整遗传控制参数,从而能够在保持群体多样性的同时加快收敛速度,克服基本遗传算法的收敛性差、易早熟问题。实验结果表明,该算法具有良好的收敛速度和稳定性,达到较好的图像分割效果,大大缩短了计算时间。     

小波变换阈值去噪法在GPS数据处理中的应用

在介绍小波变换阈值去噪法的特性及其有点的基础上,结合武汉某大学教学楼GPS变形监测数据,首先使用不同的小波函数及阈值策略分别对GPS观测数据的非差、单差相位观测值和伪距观测值进行阈值去噪处理,然后分别使用Bernese高精度数据处理和Trimble TG0软件对消噪前后的单差相位观测值、非差相位观测值和伪距观测值进行基线解算。最后,比较消噪前后基线解算结果,分析不同小波函数和阂值策略对基线解算精度的影响,探讨小波变换阅值去噪的合理方法。     

经验模式分解的尺度阈值滤波在变形分析中的应用

本文将信号处理领域的经验模式分解算法应用于变形信息的提取中,通过引入阈值函数,建立了基于经验模式分解的尺度阈值滤波模型,采用优化模型确定了经验模式分解的次数。分别通过模拟试验和实测数据与小波阈值法和多项式拟合法进行了比对,分析表明:在低噪声情况下,三种方法都有一定的滤波效果;在高噪声情况下,经验模式分解的尺度阈值滤波法具有与小波阈值去噪法相等的精度,而且瞬时强噪声识别能力更好,优于多项式拟合法。     

Reservoir description using dynamic parameterisation selection with a combined stochastic and gradient search

There is a correspondence between flow in a reservoir and large scale permeability trends. This correspondence can be derived by constraining reservoir models using observed production data. One of the challenges in deriving the permeability distribution of a field using production data involves determination of the scale of resolution of the permeability. The Adaptive Multiscale Estimation (AME) seeks to overcome the problems related to choosing the resolution of the permeability field by a dynamic parameterisation selection. The standard AME uses a gradient algorithm in solving several optimisation problems with increasing permeability resolution. This paper presents a hybrid algorithm which combines a gradient search and a stochastic algorithm to improve the robustness of the dynamic parameterisation selection. At low dimension, we use the stochastic algorithm to generate several optimised models. We use information from all these produced models to find new optimal refinements, and start out new optimisations with several unequally suggested parameterisations. At higher dimensions we change to a gradient-type optimiser, where the initial solution is chosen from the ensemble of models suggested by the stochastic algorithm. The selection is based on a predefined criterion. We demonstrate the robustness of the hybrid algorithm on sample synthetic cases, which most of them were considered insolvable using the standard AME algorithm.