OSIRIS: AO-assisted integral-field spectroscopy at the Keck Observatory

OSIRIS (OH-Suppressing Infra-Red Integral-field Spectrograph) is a new facility instrument for the Keck Observatory. After seeing first light in February 2005, OSIRIS is currently undergoing commissioning. OSIRIS provides the capability of performing three-dimensional spectroscopy in the near-infrared z, J, H, and K bands at the resolution limit of the Keck II telescope, which is equipped with adaptive optics and a laser guide star. The science case for OSIRIS is summarized, and the instrument and associated data reduction software are described.     

Simulation of adaptive optics for the Vacuum Tower Telescope

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.     

Adaptive fisheries management in Vietnam: The use of indicators and the introduction of a multi-disciplinary Marine Fisheries Specialist Team to support implementation

Vietnam is in the process of introducing adaptive management based on indicators and time-series to manage its marine fisheries. The development of indicator-based frameworks for fisheries management has accelerated in recent years. This article describes the suite of indicators being suggested or used in Vietnam including the data-collection system. The Vietnamese approach is supported by an institutional structure consisting of a multi-disciplinary advisory system to facilitate the process of using indicators and to introduce knowledge-based management. The article concludes by identifying current problems and weaknesses and by providing suggestions for future improvement of the system.     

Adaptive optimal control of an autonomous underwater vehicle in the dive plane using dorsal fins

In this paper, adaptive control of low speed bio-robotic autonomous underwater vehicles (BAUVs) in the dive plane using dorsal fins is considered. It is assumed that the model parameters are completely unknown and only the depth of the vehicle is measured for feedback. Two dorsal fins are mounted in the horizontal plane on either side of the BAUV. The normal force produced by the fins, when cambered, is used for the maneuvering. The BAUV model considered here is non-minimum phase. An indirect adaptive control system is designed for the depth control using the dorsal fins. The control system consists of a gradient based identifier for online parameter estimation, an observer for state estimation, and an optimal controller. Simulation results are presented which show that the adaptive control system accomplishes precise depth control of the BAUV using dorsal fins in spite of large uncertainties in the system parameters.     

改进的自适应遗传算法在遥感图像分割中的应用

为了自动确定遥感图像分割的最佳阈值,本文提出了一种改进的自适应遗传算法,并利用该算法对二维Otsu图像阈值分割函数进行了全局优化,提高了分割闻值的求解速度。该算法能够根据个体适应度大小和群体的分散程度自动调整遗传控制参数,从而能够在保持群体多样性的同时加快收敛速度,克服基本遗传算法的收敛性差、易早熟问题。实验结果表明,该算法具有良好的收敛速度和稳定性,达到较好的图像分割效果,大大缩短了计算时间。     

Reservoir description using dynamic parameterisation selection with a combined stochastic and gradient search

There is a correspondence between flow in a reservoir and large scale permeability trends. This correspondence can be derived by constraining reservoir models using observed production data. One of the challenges in deriving the permeability distribution of a field using production data involves determination of the scale of resolution of the permeability. The Adaptive Multiscale Estimation (AME) seeks to overcome the problems related to choosing the resolution of the permeability field by a dynamic parameterisation selection. The standard AME uses a gradient algorithm in solving several optimisation problems with increasing permeability resolution. This paper presents a hybrid algorithm which combines a gradient search and a stochastic algorithm to improve the robustness of the dynamic parameterisation selection. At low dimension, we use the stochastic algorithm to generate several optimised models. We use information from all these produced models to find new optimal refinements, and start out new optimisations with several unequally suggested parameterisations. At higher dimensions we change to a gradient-type optimiser, where the initial solution is chosen from the ensemble of models suggested by the stochastic algorithm. The selection is based on a predefined criterion. We demonstrate the robustness of the hybrid algorithm on sample synthetic cases, which most of them were considered insolvable using the standard AME algorithm.     

A multidisciplinary multi-scale framework for assessing vulnerabilities to global change

Terrestrial ecosystems provide a number of vital services for people and society, such as food, fibre, water resources, carbon sequestration, and recreation. The future capability of ecosystems to provide these services is determined by changes in socio-economic factors, land use, atmospheric composition, and climate. Most impact assessments do not quantify the vulnerability of ecosystems and ecosystem services under such environmental change. They cannot answer important policy-relevant questions such as 'Which are the main regions or sectors that are most vulnerable to global change?’ 'How do the vulnerabilities of two regions compare?’ 'Which scenario is the least harmful for a sector?’This paper describes a new approach to vulnerability assessment developed by the Advanced Terrestrial Ecosystem Analysis and Modelling (ATEAM) project. Different ecosystem models, covering biodiversity, agriculture, forestry, hydrology, and carbon sequestration are fed with the same Intergovernmental Panel on Climate Change (IPCC) scenarios based on the Special Report on Emissions Scenarios (SRES). Each model gives insights into specific ecosystems, as in traditional impact assessments. Moreover, by integrating the results in a vulnerability assessment, the policy-relevant questions listed above can also be addressed. A statistically derived European environmental stratification forms a key element in the vulnerability assessment. By linking it to other quantitative environmental stratifications, comparisons can be made using data from different assessments and spatial scales.     

Uncertainty in adaptive capacity

The capacity to adapt is a critical element of the process of adaptation: it is the vector of resources that represent the asset base from which adaptation actions can be made. Adaptive capacity can in theory be identified and measured at various scales, from the individual to the nation. The assessment of uncertainty within such measures comes from the contested knowledge domain and theories surrounding the nature of the determinants of adaptive capacity and the human action of adaptation. While generic adaptive capacity at the national level, for example, is often postulated as being dependent on health, governance and political rights, and literacy, and economic well-being, the determinants of these variables at national levels are not widely understood. We outline the nature of this uncertainty for the major elements of adaptive capacity and illustrate these issues with the example of a social vulnerability index for countries in Africa. To cite this article: W.N. Adger, K. Vincent, C. R. Geoscience 337 (2005).     

体绘制技术在地学3D GIS 可视化中的应用研究

体绘制技术是目前科学计算可视化研究的一个重要组成部分，对地质体内部属性分布的可视化有重要意义。该文针对地学研究中几何建模和属性建模同样重要的特点，基于一种矢栅一体化的混合数据模型，对地质体表面采用三角面片描述几何形状，对地质体内部采用基于八叉树的自适应网格剖分技术描述内部属性特征。对网格剖分后的体数据，采用体元投射的体绘制技术进行地质体内部属性可视化，显示出很好的效果，具有实际应用意义。     

新版建筑工程建筑面积计算规范应用探讨

GB/T 50353-2013建筑工程建筑面积计算规范于2014年7月1日开始实施,该规范是在总结原有规范基础上进行修订的,目前,新规范实施已经一年多了,依据新规范审批的建设工程陆续进入验收阶段,因此,在建筑面积测量中如何正确用好新规范显得尤为重要。本文就新规范的技术要点进行分析,以便于技术人员和管理人员正确使用新规范。