Dynamic properties of green water event in the overtopping of extreme waves on a fixed dock

A statistical model is developed to predict wave overtopping volume and rate of extreme waves on a fixed deck. The probability density function for the volume and rate of overtopping water are formulated based on the truncated Weibull distribution with the assumption of local sinusoidal profile for small amplitude waves. Sensitivity to the wave nonlinearity parameter and deck clearance is discussed. The statistical model is compared to laboratory data of the instantaneous free surface elevation measured in front of a fixed deck, and overtopping volume and overtopping rate measured at the leading edge of the deck. The statistical theory compared well with the measured exceedance probability seaward of the deck. The model prediction of the exceedance probability of deck overtopping gave qualitatively good agreement for large overtopping values.     

钛型吸附剂的表面特性

用自装的BET容量法装置测定了几种粒状钛型吸附剂的比表面及其孔径分布。测定是在常温减压下进行的。结果表明:钛型吸附剂在加铀海水中的吸铀量与样品的比表面及孔径分布有一定的内在联系。这种表面性质的研究对吸附剂的筛选有重要的指导意义。     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

台风“灿鸿”对长江口外海域悬浮体分布的影响

台风作为事件性的强动力因素,其对河口海域沉积环境的影响目前研究较少,开展典型台风事件对长江口外海域悬浮体分布的影响研究对于深入理解长江径流挟带陆源物质向东海陆架扩散机制等具有重要意义。利用2015年09号台风"灿鸿"过境前后长江口外海域现场调查数据,分析台风前后长江口外水体结构和悬浮体粒度分布变化,结合同期环境观测数据与开源数据,阐明台风对河口外海域悬浮体分布的影响机制。结果表明:长江口外海域悬浮体中细颗粒组分(≤ 128μm)主要为无机矿物颗粒,而粗颗粒组分(>128μm)主要是生源有机颗粒。生源有机粗颗粒主要分布于中上层水体,而无机细颗粒主要分布于底层水体,使得长江口外海域悬浮体平均粒径分布呈双层结构。台风前后悬浮体粒度分布变化反映了台风对长江口外海域物理和生物过程的双重影响,其中物理过程主要影响无机细颗粒分布变化,生物过程主要影响有机粗颗粒。台风期间强烈的偏北风使得长江冲淡水在口门外海域由东北输运转为往东输运,与长江冲淡水输运方向一致的表层无机细颗粒在台风后输运方向同样往东。另外,台风作用在河口区产生的下降流将12250-4站位底部再悬浮的泥质沉积物向东搬运至12300-4站,导致12300-4站底层悬浮体浓度增加、粒度变细。台风过境还造成长江口外海域初级生产力提高,而浮游植物生长对悬浮体中有机粗颗粒的形成有促进作用,使得口门外海域上层水体中有机粗颗粒体积浓度升高。长江口外海域由于台风过境导致悬浮体中无机细颗粒和生源有机颗粒含量均增加,使得其平均粒径整体变化不大。     

Application of FLATModel, a 2D finite volume code, to debris flows in the northeastern part of the Iberian Peninsula

FLATModel is a two-dimensional shallow-water approximation code with corrections and modifications that create a simulation tool adapted to debris-flows behaviour. FLATModel uses the finite volume method with the numerical implementation of the Godunov scheme and includes correction terms regarding the effect of flow over high slopes and curvature. Additionally, the stop-and-go phenomenon, the basal entrainment and a correction regarding the front inclination of the final deposit are incorporated into FLATModel. In addition, different flow resistance laws were integrated in the numerical code including Bingham, Herschel–Bulkley and Voellmy fluid model. Firstly, our numerical model was validated using analytical solutions of a dam-break scenario and published data on a laboratory experiment. Secondly, three real events, which occurred in the northeastern part of the Iberian Peninsula, were back-calculated. Although field observations of the three events are not very detailed, the back-analyses revealed interesting patterns on the flow dynamics, and the numerical results generally showed good agreement with field data. Comparing the different flow resistance laws, the Voellmy fluid model presents the best behaviour regarding both the flow behaviour and the deposit characteristics. Preliminary simulation runs incorporating the effect of basal entrainment offered satisfactory results, although the final volume is rather sensitive on the selected friction angle of channel-bed material. The outcomes regarding the correction of the calculated front inclination of the final deposit showed that this implementation strongly improves the simulation results and better represents steep fronts of final deposits.     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!     

三维地震小面元采集技术在晋城矿区的应用

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。     

Semi-analytical solutions of a contaminant transport equation with nonlinear sorption in 1D

A new method to determine semi-analytical solutions of one-dimensional contaminant transport problem with nonlinear sorption is described. This method is based on operator splitting approach where the convective transport is solved exactly and the diffusive transport by finite volume method. The exact solutions for all sorption isotherms of Freundlich and Langmuir type are presented for the case of piecewise constant initial profile and zero diffusion. Very precise numerical results for transport with small diffusion can be obtained even for larger time steps (e.g., when the Courant-Friedrichs-Lewy (CFL) condition failed).     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。