人工触发闪电电流测量及特征性分析

通过对１９９３年７月２７日的人工触发闪电电流、跨步电压的直接测量结果的分析发现,在正电场下触发的慢型放电过程由连续电流和双极性的电流脉冲过程组成,其放电特性与雷暴的电特性有关。闪电电流最大值为１．２ｋＡ,持续时间为２５ｍｓ,中和电荷量为８．９Ｃ。跨步电压与电流的测量结果相一致,是一种间接测量电流的方法。     

基于GIS的供电台区经营综合评价

探讨了运用GIS技术对供电台区经营综合评价的实现方法,选取了业务属性和空间属性两个方面评价因子,介绍了从系统软硬件、评价实现过程及显示结果等方面评价过程的具体技术实现。     

数字化地震遥测台网不间断供电系统研制

本文介绍一种适用于数字化遥测地震台网的不间断供电系统，它具有交直流不间断切换，输出满足数据采集系统及数据传输设备所需的各种电压要求，并能对备份蓄电池自动恒流、恒压转换充电及过放电保护，冗余量大、可靠性高。解决了无人值守遥测地震台的供电问题。对其它数字设备也有广泛的应用价值。     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.     

Mathematical model for hydraulically aided electrokinetic remediation of aquifer and removal of nonanionic copper

One of the most cost-effective in situ technologies for soil and groundwater (i.e., aquifer) remediation is electrokinetic remediation. In electrokinetic remediation, electromigration due to electric field is combined with hydromigration due to hydraulic flow by purge water to remove pollutants from aquifers through the pore water. This study aims at investigating theoretically the role of electromigration (as active movement) of pollutants and the role of hydromigration (as passive movement) of pollutants in electrokinetic remediation, and making it clear that the control variables for electrokinetic remediation are the applied voltage and the hydraulic flow rate. These aims are pursued by construction of a mathematical model based on physico-chemical considerations and by model simulations of the electrokinetic remediation applied to the virtual aquifer polluted by heavy metals of copper sulfate. According to numerical simulations with the model: (1) heavy metal (nonanionic copper) is removed from the upstream anode region and accumulated in the downstream cathode region; (2) to carry away the heavy metal outside the aquifer (global removal), hydromigration by purge water flow is essential; and (3) electromigration contributes mainly to the redistribution of heavy metals within the aquifer (local removal and local accumulation).     

松辽盆地古龙凹陷青山口组生排烃扩张微米孔/缝的发现及其意义

笔者等通过电子背散射、二次成像和能谱分析,结合薄片和反射显微镜观察,发现松辽盆地古龙凹陷青山口组页岩中发育了大量由生排烃扩张形成的微米孔和微米缝。生排烃高压扩张微米孔的特点有：①一般只发育在超高压的页岩油储层中;②一般只发育在黏土质长英页岩中,纯黏土岩少见;③多为近圆形或半圆形,直径多在0. 5 μm到数微米,一般1~2 μm,最大可达8 μm;④孔缘一般为以绿泥石为主的黏土,形成不连续的圈环;圈环上缘的黏土多呈弧形或眉状,绿泥石化明显,在背散射图像中呈亮色;⑤孔内多有自生的纳米级葡萄状或豆渣状黏土,是构成封存油气的物质基础;⑥生排烃高压扩张微米孔可以组合成4种类型：即垂向联结成垂直的排烃烟囱型、垂向联结成倾斜的排烃烟囱型、水平联结成顺层的排烃管型和竖面上联结成更大的片状大孔型。排烃烟囱直或微曲,直立或倾斜;宽1~3 μm,最宽可达200 μm;高十几到30 μm,最大可达1500 μm;顶部多与顺层微米缝（或毫米缝）联结,是排烃烟囱的最终泄压和泄油气的总库;生排烃扩张微米孔孔隙度变化大,面孔率一般在5%~6%,局部面孔率最高可达39. 66%。生排烃高压扩张微米缝的特点有：①一般只发育在超高压的页岩油储层中;②一般只发育在黏土质长英页岩中,纯黏土岩少见;③多以顺页理为主的微米缝为主;④略曲的张性缝,多呈锯齿状,绕过刚性矿物;⑤宽度多在0. 5 μm到数十微米;最宽可达150 μm;⑥多与黄铁矿、白云石、磷灰石等自生矿物伴生;⑦多与生排烃扩张微米孔和排烃烟囱相连。生排烃扩张微米孔缝的形成动力主要有两种：一种是烃类流体的高压扩张力;第二种是烃类流体的化学溶蚀力。笔者等计算了形成这种生排烃微米孔和微米缝的压力,形成生排烃扩张微米孔从1500 m的44. 74 MPa到2500 m深的74. 81 MPa;形成生排烃扩张微米缝的排烃压力稍大,在相同深度比形成生排烃扩张微米孔大3 MPa。生排烃扩张微米孔缝与其他孔缝相连构成了一个储运网络,使储层的储集能力和渗透性大幅增加,是可动用储量的主要贡献者,为古龙页岩油的开发创造了有利条件。生排烃扩张微米孔缝的发现对于古龙页岩油的勘探开发具有重要意义,同时对于页岩油储层的研究具有启发作用。     

含水采空区全空间瞬变电磁响应分析

针对含水采空区全空间瞬变电磁响应信号识别问题,采用有限元数值模拟及现场实测方法,基于电动势—视电阻率及对应时深转换关系,获取了全扇面视电阻率随深度变化的空间分布规律,提取了低阻异常区测点感应电动势衰减曲线,得出了测点随探测角度变化的电动势量化变化规律.基于上述研究,开展了井下钻探验证及钻孔窥视,并对现场钻孔出水水样进行...     

高压电脉冲破岩试验装置的研制

高压电脉冲破岩钻进在国际上被认为是一种在深部钻探中具有广阔发展前景的破岩方法,但在国内研究还很少。本文设计制造了一套高压电脉冲破岩试验装置,包含伺服电动缸、控制柜、岩石容器等部件,试验装置配套了?60 mm和?100 mm的电脉冲钻头,可选择手动或自动加压放电破碎岩石。在放电电压为120 kV、放电频率为1 Hz的条件下进行了红砂岩等岩石的钻进试验,实现了60 mm口径的钻进碎岩。试验结果表明,该装置能满足电脉冲破岩试验的基本要求,可用于电脉冲碎岩室内研究。     

喜马拉雅超高压变质作用

喜马拉雅超高压变质带主要由表壳岩石组成,其中的长英质变质岩已经全部退变质,只在基性的榴辉岩中保留有某些超高压变质矿物.这些超高压变质矿物在锆石、石榴石及其他一些化学和机械性质稳定的矿物中以微米级的包裹体形式产出.到目前为止,已经在Tso Morari结晶穹隆和上Kaghan谷高喜马拉雅结晶岩中发现了超高压指示矿物柯石英和多晶石英假像.这2个地区同属一个超高压变质带,具有相似的构造背景、岩石组成及变质年龄.Kaghan谷超高压变质岩形成条件为700～770°C和2.7～3.2 GPa,相当于90～110 km 的上地幔深度,形成年龄为(46.2±0.7) Ma.Tso Morari结晶穹隆中超高压变质岩的形成条件约为750°C和3.9 GPa,形成年龄为(48±1) Ma.上述超高压变质带在其折返过程中普遍经历了强烈的水化和角闪岩相退变质作用.研究表明,印度大陆地壳俯冲的垂向速率为1.1～1.4 cm/a,水平速率为4.5 cm/a,俯冲到约100 km深度时的平均俯冲角度为14～19°.     

Metamorphic evolution of garnet-bearing ultramafic rocks from the Gongen area, Sanbagawa belt, Japan

Garnet‐bearing ultramafic rocks including clinopyroxenite, wehrlite and websterite locally crop out in the Higashi‐akaishi peridotite of the Besshi region in the Cretaceous Sanbagawa metamorphic belt. These rock types occur within dunite as lenses, boudins or layers with a thickness ranging from a few centimetres to 1 metre. The wide and systematic variation of bulk‐rock composition and the overall layered structure imply that the ultramafic complex originated as a cumulate sequence. Garnet and other major silicates contain rare inclusions of edenitic amphibole, chlorite and magnetite, implying equilibrium at relatively low P–T conditions during prograde metamorphism. Orthopyroxene coexisting with garnet shows bell‐shaped Al zoning with a continuous decrease of Al from the core towards the rim, consistent with rims recording peak metamorphic conditions. Estimated P–T conditions using core and rim compositions of orthopyroxene are 1.5–2.4 GPa/700–800 °C and 2.9–3.8 GPa/700–810 °C, respectively, implying a high P/T gradient (> 3.1 GPa/100 °C) during prograde metamorphism. The presence of relatively low P–T conditions at an early stage of metamorphism and the steep P/T gradient together trace a concave upwards P–T path that shows increasing P/T with higher T, similar to P–T paths reported from other UHP metamorphic terranes. These results suggest either (1) down dragging of hydrated mantle cumulate parallel to the slab–wedge interface in the subduction zone by mechanical coupling with the subducting slab or (2) ocean floor metamorphism and/or serpentinization at early stage of subduction of oceanic lithosphere and ensuing HP–UHP prograde metamorphism.