Origin of Fe-Ti Oxide Ores in Mafic Intrusions: Evidence from the Panzhihua Intrusion, SW China

Economic concentrations of Fe–Ti oxides occur as massive,conformable lenses or layers in the lower part of the Panzhihuaintrusion, Emeishan Large Igneous Province, SW China. Mineralchemistry, textures and QUILF equilibria indicate that oxidesin rocks of the intrusion were subjected to extensive subsolidusre-equilibration and exsolution. The primary oxide, reconstructedfrom compositions of titanomagnetite in the ores and associatedintergrowths, is an aluminous titanomagnetite (Usp₄₀) with 40wt % FeO, 34 wt % Fe₂O₃, 16·5 wt % TiO₂, 5·3 wt% Al₂O₃, 3·5 wt % MgO and 0·5 wt % MnO. This compositionis similar to the bulk composition of the oxide ore, as inferredfrom whole-rock data. This similarity strongly suggests thatthe ores formed from accumulation of titanomagnetite crystals,not from immiscible oxide melt as proposed in earlier studies.The occurrence of oxide ores in the lower parts of the Panzhihuaintrusion is best explained by settling and sorting of densetitanomagnetite in the ferrogabbroic parental magma. This magmamust have crystallized Fe–Ti oxides relatively early andabundantly, and is likely to have been enriched in Fe and Tibut poor in SiO₂. These features are consistent with fractionationof mantle-derived melts under relatively high pressures (10kbar), followed by emplacement of the residual magma at 5 kbar.This study provides definitive field and geochemical evidencethat Fe–Ti oxide ores can form by accumulation in ferrogabbro.We suggest that many other massive Fe–Ti oxide depositsmay have formed in a similar fashion and that high concentrationsof phosphorus or carbon, or periodic fluctuation of fO₂ in themagma, are of secondary importance in ore formation. KEY WORDS: ELIP; Fe–Ti oxide ore; layered intrusion; Panzhihua; QUILF     

珠江口沉积物酸挥发性硫化物与重金属生物毒性的研究

研究了2003年10月采于珠江口5个站位的沉积物剖面酸挥发性硫化物(AVS)和同时提取的重金属(SEM:Pb,Zn,Cu,Cd,Ni)。其中,站位1、2位于中滩,其沉积物的AVS含量变化范围较小,为0.25—4.06μmol.g-1;站位3、4位于西滩,其沉积物的AVS含量变化范围较大,为0—26.09μmol.g-1。中滩和西滩沉积物的AVS含量均随深度增加。西滩表层沉积物的AVS含量接近于零,这可能与该水域较强的底层流和沉积物的再悬浮作用有关。站位5位于珠江口外侧,其表层沉积物的AVS含量相对较高,且垂向变化较小,可能是还原性沉积物间歇性再悬浮后重新沉积的结果。站位1、2和5沉积物中同时提取的重金属含量大体在0.95±0.2μmol.g-1范围内,随深度增加略呈下降趋势;而西滩沉积物重金属含量相对较高,为1.43—2.42μmol.g-1,且在一定深度范围内随深度增加呈明显下降的趋势,表明珠江口西滩沉积物中的重金属污染有加重的趋势。对AVS/SEM摩尔比值和单个金属的毒性效应研究显示,珠江口内尤其是西滩的表层沉积物存在重金属污染,对其中生活的底栖生物具有潜在的毒性效应。     

Seasonal dynamics of elemental sulfur in two coastal sediments

A spectrophotometric method for elemental sulfur (S⁰) analysis without interference from other reduced sulfur compounds was adapted for the use in reducing sediments. The S⁰ distribution in two coastal sediments was studied regularly from summer to winter and compared to factors regulating the S⁰ accumulation, such as redox potentials, the rate of bacterial sulfide production and the general sulfur chemistry. Dense coatings of sulfur bacteria developed on the sediment surface of a sulfuretum which had an S⁰ concentration of up to 41 μmol S cm^?3. The 2·5-mm thick bacterial coating contained 40% of all S⁰ in the sediment. A more typical marine sediment with a few cm thick oxidized surface layer had an S⁰ maximum of 1–3 μmol S cm^?3 at 2–4 cm depth. The S⁰ maximum in both sediments increased from summer to winter as the sediments gradually became more oxidized. The deeper layers maintained a low S⁰ concentration. Most of the S⁰ in the upper few mm of a laboratory sulfuretum was present inside sulfur bacteria and actively migrated up and down with the bacteria depending upon the changing light and oxygen conditions.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

Isotopes and Geochronology of the Meixian-type Pb-Zn-(Ag)Deposits,Central Fujian Rift,South China:Implications for Geological Events

Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.     

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.     

On the pH-dependent formation constants of iron(III)-sulfur(IV) transient complexes

An experimental study is described of Fe(III)-S(IV) formation constants measured as a function of pH (1–3), ionic strength (0.2–0.5 M) and [Fe(III)] _T (2.5–5.0×10^–4 M) using a continuous-flow spectrophotometric technique to make observations 160 ms after mixing. Preliminary experiments using pulse-accelerated-flow (PAF) spectrophotometry to measure rate constants on a microsecond timescale are also described. The conditional formation constant at 25 °C can be modeled with the following equation: {ie307-1} where {ie307-2}K ₇ andK ₈ can be interpreted as intrinsic constants for the coordination of HSO ₃ ^– by FeOH²⁺ and Fe³⁺, respectively, but until further evidence is obtained they should be regarded as fitting constants. PAF spectrophotometry showed that the initial reaction of Fe(III) with S(IV) (pH 2.0) is characterized by a second-order rate constant of 4×10⁶ M^–1 s^–1 which is comparable to rate of reaction of FeOH²⁺ with SO ₄ ^2– . However, the PAF results should be regarded as preliminary since unexpected features in the initial data indicate that the reaction may be more complex than expected.     

Kinetics of redox cycling of iron coupled with fulvic acid

The kinetics of conversion of iron(III) (hydr)oxides to ferrous iron mediated by fulvic acid have been investigated in order to improve the understanding of the redox cycling of iron at the oxic-anoxic boundary in natural waters. Under the conditions similar to natural waters, fulvic acid is able to reduce the iron(III) (hydr)oxide. The kinetics of the reaction depend on the reactivity of iron(III) (hydr)oxides and the reducing power of the fulvic acid. The rate of reaction is 60 nm/h obtained under following conditions: total concentration of Fe(III) 1.0 × 10^–4 M, pH 7.5, fulvic acid 5 mg/L. The rate is considered as a net result of reduction and oxidation in the > Fe^III-OH/Fe(II) wheel coupled with fulvic acid. In a real natural water system, reductants other than fulvic acid may be of importance. The results obtained in the laboratory, however, provide evidence that the Fe(OH)₃(s)/Fe(II) redox couple is able to act as an electron-transfer mediator for the oxidation of natural organic substances, such as fulvic acid by molecular oxygen either in the absence of microorganisms or as a supplement to microbial activity.     

A multivariate statistical and geostatistical study on the geochemistry of allochtonous karst bauxite deposits in Hungary

A geochemical evaluation of the Szc-Halimba-Kisld area, Hungary, covering an area of more than 200 km² is presented using different statistical and geostatistical methods. The study area is a representative example of allochtonous karst bauxite accumulation. The three groups of deposits studied here have been explored and mined since 1950. Several thousand boreholes have been drilled, and bauxite cores were analyzed for the five main chemical components. A total of 80,000 pleces of analytical data were processed, followed by a geological examination of borehole logs and of mining excavations.The quantitative geochemical evaluation of the data set led to both geochemical and practical results: The geochemical behavior of the allochtonous, clastic karst bauxite deposits differs essentially from that of the autochtonous and parautochtonous ones, as well as that of the lateritic bauxite deposits. The deposits of the study area can be split into several subsequent geochemical-sedimentological units, each representing an event of bauxite transport and accumulation. Clear regional patterns can be revealed in the composition of these units. The geostatistically measured chemical variability of the geochemical units is rather different, the lowest units showing the smallest variability. The interrelations of the main chemical components are weaker and more irregular in the studied deposits than in the autochtonous lateritic bauxite deposits. Additional local genetic features, such as transport routes, can be delineated by the methods applied. Within each deposit, local changes of chemical composition and of its variability can be determined more precisely. These results can be used in bauxite prospecting and exploration, because areas of high or low bauxite quality can be predicted.