用PCI中断实现射电望远镜跟踪的方法

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。     

Electromagnetic signals associated with stick–slip of quartz-free rocks

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.     

基于矢量信号处理的水声定位系统

将传统的水声定位系统与矢量水听器相结合，设计了一种全新的轻便型长基线被动水声定位系统。介绍了系统的组成和工作原理，并结合近年来出现的矢量信号处理技术，设计了新的实时信号处理软件。经湖试和海试，系统的可行性得到了初步的验证。     

基于子波分析的悬浮物散射信号特征提取实验研究

概述了应用子波分析对悬浮物测量中的声散射信号进行特征提取的方法 ,并对声散射信号识别的研究进行了探讨。对实测数据的实验取得了较好的结果     

噪声信号源超磁致伸缩换能器设计方法研究

针对以往噪声信号发射换能器在实际工作中,存在着诸多影响正常科研试验的问题,并根据噪声信号的技术要求,以及探测方式的技术特征,我们对噪声发射换能器进行了重新设计,从选用超磁致伸缩材料作为换能器的材料入手,结合国内外一些新的设计理念,从材料性能分析,到理论设计,最后到可靠性实施方法,都进行了周密细致的研究,并完成了设计全过程。测试结果和使用性能表明,达到了预期的目的,这也是该材料在国内首次应用于单只宽频水声换能器中,开创了稀土超磁致伸缩材料应用的又一个先列。     

GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

地震信号的相位恢复及误差分析

常见的几种地震子波有:零相位子波、最小相位子波、最大相位子波和混合相位子波。以不同类型的信号为激发子波,对不同地层模型合成地震道。仅用原始合成地震道记录的振幅谱来恢复原始记录,讨论不同方法下,由于激发子波的不同,对比分析原始记录与恢复记录的差异,及其恢复效果。     

保持主分量变换结果信息的量化方法

从主分量变换后图像信息保持的角度出发，充分分析了变换结果存储导致信息丢失的原因；同时以直接线性变换为基础，提出了另外两种新的对主分量变换结果进行量化的方法；并对这3种方法进行了充分的比较，文中最后以信息熵为指标评价了3种方法的优劣。